devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Stephen Boyd <swboyd@chromium.org>
To: Benson Leung <bleung@chromium.org>
Cc: linux-kernel@vger.kernel.org, patches@lists.linux.dev,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	devicetree@vger.kernel.org, chrome-platform@lists.linux.dev,
	Guenter Roeck <groeck@chromium.org>,
	Douglas Anderson <dianders@chromium.org>,
	Craig Hesling <hesling@chromium.org>,
	Tom Hughes <tomhughes@chromium.org>,
	Alexandru M Stan <amstan@chromium.org>,
	Tzung-Bi Shih <tzungbi@kernel.org>,
	Matthias Kaehlcke <mka@chromium.org>,
	Lee Jones <lee.jones@linaro.org>
Subject: [PATCH v6 2/2] dt-bindings: cros-ec: Add ChromeOS fingerprint binding
Date: Tue, 14 Jun 2022 12:51:44 -0700	[thread overview]
Message-ID: <20220614195144.2794796-3-swboyd@chromium.org> (raw)
In-Reply-To: <20220614195144.2794796-1-swboyd@chromium.org>

Add a binding to describe the fingerprint processor found on Chromebooks
with a fingerprint sensor. Previously we've been describing this with
the google,cros-ec-spi binding but it lacks gpio and regulator control
used during firmware flashing.

Cc: Rob Herring <robh+dt@kernel.org>
Cc: Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: <devicetree@vger.kernel.org>
Cc: <chrome-platform@lists.linux.dev>
Cc: Guenter Roeck <groeck@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Craig Hesling <hesling@chromium.org>
Cc: Tom Hughes <tomhughes@chromium.org>
Cc: Alexandru M Stan <amstan@chromium.org>
Cc: Tzung-Bi Shih <tzungbi@kernel.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Benson Leung <bleung@chromium.org>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 .../bindings/chrome/google,cros-ec-fp.yaml    | 97 +++++++++++++++++++
 .../bindings/mfd/google,cros-ec.yaml          |  9 ++
 2 files changed, 106 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/chrome/google,cros-ec-fp.yaml

diff --git a/Documentation/devicetree/bindings/chrome/google,cros-ec-fp.yaml b/Documentation/devicetree/bindings/chrome/google,cros-ec-fp.yaml
new file mode 100644
index 000000000000..48c02bd4585c
--- /dev/null
+++ b/Documentation/devicetree/bindings/chrome/google,cros-ec-fp.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/chrome/google,cros-ec-fp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChromeOS Embedded Fingerprint Controller
+
+description:
+  Google's ChromeOS embedded fingerprint controller is a device which
+  implements fingerprint functionality such as unlocking a Chromebook
+  without typing a password.
+
+maintainers:
+  - Tom Hughes <tomhughes@chromium.org>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: google,cros-ec-spi
+  required:
+    - compatible
+    - boot0-gpios
+
+allOf:
+  - $ref: /schemas/spi/spi-peripheral-props.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: google,cros-ec-fp
+      - const: google,cros-ec-spi
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  controller-data: true
+
+  google,cros-ec-spi-pre-delay:
+    description:
+      This property specifies the delay in usecs between the
+      assertion of the CS and the first clock pulse.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  google,cros-ec-spi-msg-delay:
+    description:
+      This property specifies the delay in usecs between messages.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    default: 0
+
+  spi-max-frequency:
+    maximum: 3000000
+
+  reset-gpios:
+    maxItems: 1
+
+  boot0-gpios:
+    maxItems: 1
+    description: Assert for bootloader mode.
+
+  vdd-supply: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - reset-gpios
+  - boot0-gpios
+  - vdd-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi0 {
+      #address-cells = <0x1>;
+      #size-cells = <0x0>;
+
+      ec@0 {
+        compatible = "google,cros-ec-fp", "google,cros-ec-spi";
+        reg = <0x0>;
+        interrupt-parent = <&gpio_controller>;
+        interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+        spi-max-frequency = <3000000>;
+        reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>;
+        boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>;
+        vdd-supply = <&pp3300_fp_mcu>;
+      };
+    };
+...
diff --git a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
index 178e26ab115c..a7453bbd7bed 100644
--- a/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
+++ b/Documentation/devicetree/bindings/mfd/google,cros-ec.yaml
@@ -10,6 +10,15 @@ maintainers:
   - Benson Leung <bleung@chromium.org>
   - Guenter Roeck <groeck@chromium.org>
 
+select:
+  properties:
+    compatible:
+      contains:
+        const: google,cros-ec-spi
+    boot0-gpios: false
+  required:
+    - compatible
+
 description:
   Google's ChromeOS EC is a microcontroller which talks to the AP and
   implements various functions such as keyboard and battery charging.
-- 
https://chromeos.dev


  parent reply	other threads:[~2022-06-14 19:51 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-14 19:51 [PATCH v6 0/2] dt-bindings: cros-ec: Update for fingerprint devices Stephen Boyd
2022-06-14 19:51 ` [PATCH v6 1/2] dt-bindings: cros-ec: Reorganize property availability Stephen Boyd
2022-06-14 22:41   ` Doug Anderson
2022-06-16  0:39     ` Stephen Boyd
2022-06-27 21:35   ` Rob Herring
2022-06-14 19:51 ` Stephen Boyd [this message]
2022-06-14 22:41   ` [PATCH v6 2/2] dt-bindings: cros-ec: Add ChromeOS fingerprint binding Doug Anderson
2022-06-16  0:50     ` Stephen Boyd
2022-06-27 21:57     ` Rob Herring
2022-06-29  7:29       ` Stephen Boyd

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220614195144.2794796-3-swboyd@chromium.org \
    --to=swboyd@chromium.org \
    --cc=amstan@chromium.org \
    --cc=bleung@chromium.org \
    --cc=chrome-platform@lists.linux.dev \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=groeck@chromium.org \
    --cc=hesling@chromium.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mka@chromium.org \
    --cc=patches@lists.linux.dev \
    --cc=robh+dt@kernel.org \
    --cc=tomhughes@chromium.org \
    --cc=tzungbi@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).