Re: [PATCH] dt-bindings: display: delete ilitek,ili9341.txt

[Rob Herring <robh@kernel.org>]

On Fri, Jun 17, 2022 at 10:37:07PM +0100, Conor Dooley wrote:
> From: Conor Dooley <conor.dooley@microchip.com>
> 
> ilitek,ili9341.txt was replaced by ilitek,ili9341.yaml but the txt

panel/ilitek,ili9341.yaml


> binding was not deleted. Do so.
> 
> Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
> ---
>  .../bindings/display/ilitek,ili9341.txt       | 27 -------------------
>  1 file changed, 27 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> 
> diff --git a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt b/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> deleted file mode 100644
> index 169b32e4ee4e..000000000000
> --- a/Documentation/devicetree/bindings/display/ilitek,ili9341.txt
> +++ /dev/null
> @@ -1,27 +0,0 @@
> -Ilitek ILI9341 display panels
> -
> -This binding is for display panels using an Ilitek ILI9341 controller in SPI
> -mode.
> -
> -Required properties:
> -- compatible:	"adafruit,yx240qv29", "ilitek,ili9341"

"adafruit,yx240qv29" is not in the schema.

> -- dc-gpios:	D/C pin
> -- reset-gpios:	Reset pin

Neither is this. It is in panel-common.yaml, but 'unevaluatedProperties' 
needs to be used instead to allow it. Or add 'reset-gpios: true'.

> -
> -The node for this driver must be a child node of a SPI controller, hence
> -all mandatory properties described in ../spi/spi-bus.txt must be specified.
> -
> -Optional properties:
> -- rotation:	panel rotation in degrees counter clockwise (0,90,180,270)
> -- backlight:	phandle of the backlight device attached to the panel
> -
> -Example:
> -	display@0{
> -		compatible = "adafruit,yx240qv29", "ilitek,ili9341";
> -		reg = <0>;
> -		spi-max-frequency = <32000000>;
> -		dc-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
> -		reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
> -		rotation = <270>;
> -		backlight = <&backlight>;
> -	};
> -- 
> 2.36.1
> 
>