From: Tomer Maimon <tmaimon77@gmail.com>
To: <avifishman70@gmail.com>, <tali.perry1@gmail.com>,
<joel@jms.id.au>, <venture@google.com>, <yuenn@google.com>,
<benjaminfair@google.com>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>, <mturquette@baylibre.com>,
<sboyd@kernel.org>, <p.zabel@pengutronix.de>,
<gregkh@linuxfoundation.org>, <daniel.lezcano@linaro.org>,
<tglx@linutronix.de>, <wim@linux-watchdog.org>,
<linux@roeck-us.net>, <catalin.marinas@arm.com>,
<will@kernel.org>, <arnd@arndb.de>, <olof@lixom.net>,
<jirislaby@kernel.org>, <shawnguo@kernel.org>,
<bjorn.andersson@linaro.org>, <geert+renesas@glider.be>,
<marcel.ziswiler@toradex.com>, <vkoul@kernel.org>,
<biju.das.jz@bp.renesas.com>, <nobuhiro1.iwamatsu@toshiba.co.jp>,
<robert.hancock@calian.com>, <j.neuschaefer@gmx.net>,
<lkundrak@v3.sk>
Cc: <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-clk@vger.kernel.org>, <linux-serial@vger.kernel.org>,
<linux-watchdog@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v3 00/18] Introduce Nuvoton Arbel NPCM8XX BMC SoC
Date: Sun, 19 Jun 2022 18:12:07 +0300 [thread overview]
Message-ID: <20220619151225.209029-1-tmaimon77@gmail.com> (raw)
This patchset adds initial support for the Nuvoton
Arbel NPCM8XX Board Management controller (BMC) SoC family.
The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
The NPCM8XX computing subsystem comprises a quadcore ARM
Cortex A35 ARM-V8 architecture.
This patchset adds minimal architecture and drivers such as:
Clocksource, Clock, Reset, and WD.
Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
This patchset was tested on the Arbel NPCM8XX evaluation board.
Addressed comments from:
- Arnd Bergmann : https://www.spinics.net/lists/arm-kernel/msg986516.html
https://www.spinics.net/lists/arm-kernel/msg986540.html
- Stephen Boyd: https://www.spinics.net/lists/devicetree/msg507280.html
- Krzysztof Kozlowski: https://www.spinics.net/lists/kernel/msg4389776.html
https://www.spinics.net/lists/arm-kernel/msg986462.html
https://www.spinics.net/lists/linux-clk/msg71589.html
https://www.spinics.net/lists/arm-kernel/msg987286.html
https://www.spinics.net/lists/arm-kernel/msg987099.html
https://www.spinics.net/lists/kernel/msg4389821.html
- Rob Herring : https://www.spinics.net/lists/arm-kernel/msg986655.html
Changes since version 2:
- Remove NPCM8xx WDT compatible patch.
- Remove NPCM8xx UART compatible patch.
- NPCM8XX clock driver
- Add debug new line.
- Add 25M fixed rate clock.
- Remove unused clocks and clock name from dt-binding.
- NPCM reset driver
- Revert to npcm7xx dt-binding.
- Skip dt binding quotes.
- Adding DTS backward compatibility.
- Remove NPCM8xx binding include file.
- Warp commit message.
- NPCM8XX device tree:
- Remove unused clock nodes (used in the clock driver)
- Modify gcr and rst node names.
Changes since version 1:
- NPCM8XX clock driver
- Modify dt-binding.
- Remove unsed definition and include.
- Include alphabetically.
- Use clock devm.
- NPCM reset driver
- Modify dt-binding.
- Modify syscon name.
- Add syscon support to NPCM7XX dts reset node.
- use data structure.
- NPCM8XX device tree:
- Modify evb compatible name.
- Add NPCM7xx compatible.
- Remove disable nodes from the EVB DTS.
Tomer Maimon (18):
dt-bindings: timer: npcm: Add npcm845 compatible string
clocksource: timer-npcm7xx: Add NPCM845 timer support
dt-bindings: serial: 8250: Add npcm845 compatible string
dt-bindings: watchdog: npcm: Add npcm845 compatible string
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
clk: npcm8xx: add clock controller
dt-bindings: reset: npcm: add GCR syscon property
ARM: dts: nuvoton: add reset syscon property
reset: npcm: using syscon instead of device data
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: Add NPCM8XX support
dt-bindings: arm: npcm: Add maintainer
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: defconfig: Add Nuvoton NPCM family support
.../devicetree/bindings/arm/npcm/npcm.yaml | 7 +
.../bindings/arm/npcm/nuvoton,gcr.yaml | 2 +
.../bindings/clock/nuvoton,npcm845-clk.yaml | 49 ++
.../bindings/reset/nuvoton,npcm750-reset.yaml | 9 +-
.../devicetree/bindings/serial/8250.yaml | 1 +
.../bindings/timer/nuvoton,npcm7xx-timer.yaml | 2 +
.../bindings/watchdog/nuvoton,npcm-wdt.txt | 3 +-
MAINTAINERS | 2 +
arch/arm/boot/dts/nuvoton-common-npcm7xx.dtsi | 1 +
arch/arm64/Kconfig.platforms | 11 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/nuvoton/Makefile | 2 +
.../dts/nuvoton/nuvoton-common-npcm8xx.dtsi | 170 ++++
.../boot/dts/nuvoton/nuvoton-npcm845-evb.dts | 30 +
.../boot/dts/nuvoton/nuvoton-npcm845.dtsi | 76 ++
arch/arm64/configs/defconfig | 3 +
drivers/clk/Kconfig | 6 +
drivers/clk/Makefile | 1 +
drivers/clk/clk-npcm8xx.c | 760 ++++++++++++++++++
drivers/clocksource/timer-npcm7xx.c | 1 +
drivers/reset/reset-npcm.c | 206 ++++-
.../dt-bindings/clock/nuvoton,npcm8xx-clock.h | 49 ++
22 files changed, 1356 insertions(+), 36 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/nuvoton,npcm845-clk.yaml
create mode 100644 arch/arm64/boot/dts/nuvoton/Makefile
create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
create mode 100644 arch/arm64/boot/dts/nuvoton/nuvoton-npcm845.dtsi
create mode 100644 drivers/clk/clk-npcm8xx.c
create mode 100644 include/dt-bindings/clock/nuvoton,npcm8xx-clock.h
--
2.33.0
next reply other threads:[~2022-06-19 15:15 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-19 15:12 Tomer Maimon [this message]
2022-06-19 15:12 ` [PATCH v3 01/18] dt-bindings: timer: npcm: Add npcm845 compatible string Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 02/18] clocksource: timer-npcm7xx: Add NPCM845 timer support Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 03/18] dt-bindings: serial: 8250: Add npcm845 compatible string Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 04/18] dt-bindings: watchdog: npcm: " Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 05/18] dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock Tomer Maimon
2022-06-20 8:21 ` Krzysztof Kozlowski
2022-06-20 8:51 ` Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 06/18] clk: npcm8xx: add clock controller Tomer Maimon
2022-06-19 17:14 ` Christophe JAILLET
2022-06-20 12:48 ` Tomer Maimon
2022-06-20 17:59 ` Christophe JAILLET
2022-06-21 13:11 ` Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 07/18] dt-bindings: reset: npcm: add GCR syscon property Tomer Maimon
2022-06-20 8:22 ` Krzysztof Kozlowski
2022-06-20 8:49 ` Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 08/18] ARM: dts: nuvoton: add reset " Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 09/18] reset: npcm: using syscon instead of device data Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 10/18] dt-bindings: reset: npcm: Add support for NPCM8XX Tomer Maimon
2022-06-20 8:23 ` Krzysztof Kozlowski
2022-06-19 15:12 ` [PATCH v3 11/18] reset: npcm: Add NPCM8XX support Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 12/18] dt-bindings: arm: npcm: Add maintainer Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 13/18] dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 14/18] dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR " Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 15/18] arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC Tomer Maimon
2022-06-19 15:12 ` [PATCH v3 16/18] arm64: dts: nuvoton: Add initial NPCM8XX device tree Tomer Maimon
2022-06-20 8:26 ` Krzysztof Kozlowski
2022-06-19 15:12 ` [PATCH v3 17/18] arm64: dts: nuvoton: Add initial NPCM845 EVB " Tomer Maimon
2022-06-20 8:26 ` Krzysztof Kozlowski
2022-06-19 15:12 ` [PATCH v3 18/18] arm64: defconfig: Add Nuvoton NPCM family support Tomer Maimon
2022-06-20 8:26 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220619151225.209029-1-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=arnd@arndb.de \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=bjorn.andersson@linaro.org \
--cc=catalin.marinas@arm.com \
--cc=daniel.lezcano@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=gregkh@linuxfoundation.org \
--cc=j.neuschaefer@gmx.net \
--cc=jirislaby@kernel.org \
--cc=joel@jms.id.au \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-serial@vger.kernel.org \
--cc=linux-watchdog@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=lkundrak@v3.sk \
--cc=marcel.ziswiler@toradex.com \
--cc=mturquette@baylibre.com \
--cc=nobuhiro1.iwamatsu@toshiba.co.jp \
--cc=olof@lixom.net \
--cc=p.zabel@pengutronix.de \
--cc=robert.hancock@calian.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=shawnguo@kernel.org \
--cc=tali.perry1@gmail.com \
--cc=tglx@linutronix.de \
--cc=venture@google.com \
--cc=vkoul@kernel.org \
--cc=will@kernel.org \
--cc=wim@linux-watchdog.org \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).