From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Stephen Boyd <swboyd@chromium.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Taniya Das <quic_tdas@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org,
Marijn Suijten <marijn.suijten@somainline.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>
Subject: [PATCH v3 4/7] clk: qcom: gcc-msm8916: move clock parent tables down
Date: Mon, 20 Jun 2022 00:27:32 +0300 [thread overview]
Message-ID: <20220619212735.1244953-5-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220619212735.1244953-1-dmitry.baryshkov@linaro.org>
Move clock parent tables down, after the GPLL declrataions, so that we
can use gpll hw clock fields in the next commit.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/clk/qcom/gcc-msm8916.c | 216 ++++++++++++++++-----------------
1 file changed, 108 insertions(+), 108 deletions(-)
diff --git a/drivers/clk/qcom/gcc-msm8916.c b/drivers/clk/qcom/gcc-msm8916.c
index 40c27ba6286f..7962edbdbcf6 100644
--- a/drivers/clk/qcom/gcc-msm8916.c
+++ b/drivers/clk/qcom/gcc-msm8916.c
@@ -42,6 +42,114 @@ enum {
P_EXT_MCLK,
};
+static struct clk_pll gpll0 = {
+ .l_reg = 0x21004,
+ .m_reg = 0x21008,
+ .n_reg = 0x2100c,
+ .config_reg = 0x21010,
+ .mode_reg = 0x21000,
+ .status_reg = 0x2101c,
+ .status_bit = 17,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll0",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
+static struct clk_regmap gpll0_vote = {
+ .enable_reg = 0x45000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll0_vote",
+ .parent_names = (const char *[]){ "gpll0" },
+ .num_parents = 1,
+ .ops = &clk_pll_vote_ops,
+ },
+};
+
+static struct clk_pll gpll1 = {
+ .l_reg = 0x20004,
+ .m_reg = 0x20008,
+ .n_reg = 0x2000c,
+ .config_reg = 0x20010,
+ .mode_reg = 0x20000,
+ .status_reg = 0x2001c,
+ .status_bit = 17,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll1",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
+static struct clk_regmap gpll1_vote = {
+ .enable_reg = 0x45000,
+ .enable_mask = BIT(1),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll1_vote",
+ .parent_names = (const char *[]){ "gpll1" },
+ .num_parents = 1,
+ .ops = &clk_pll_vote_ops,
+ },
+};
+
+static struct clk_pll gpll2 = {
+ .l_reg = 0x4a004,
+ .m_reg = 0x4a008,
+ .n_reg = 0x4a00c,
+ .config_reg = 0x4a010,
+ .mode_reg = 0x4a000,
+ .status_reg = 0x4a01c,
+ .status_bit = 17,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "gpll2",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
+static struct clk_regmap gpll2_vote = {
+ .enable_reg = 0x45000,
+ .enable_mask = BIT(2),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll2_vote",
+ .parent_names = (const char *[]){ "gpll2" },
+ .num_parents = 1,
+ .ops = &clk_pll_vote_ops,
+ },
+};
+
+static struct clk_pll bimc_pll = {
+ .l_reg = 0x23004,
+ .m_reg = 0x23008,
+ .n_reg = 0x2300c,
+ .config_reg = 0x23010,
+ .mode_reg = 0x23000,
+ .status_reg = 0x2301c,
+ .status_bit = 17,
+ .clkr.hw.init = &(struct clk_init_data){
+ .name = "bimc_pll",
+ .parent_names = (const char *[]){ "xo" },
+ .num_parents = 1,
+ .ops = &clk_pll_ops,
+ },
+};
+
+static struct clk_regmap bimc_pll_vote = {
+ .enable_reg = 0x45000,
+ .enable_mask = BIT(3),
+ .hw.init = &(struct clk_init_data){
+ .name = "bimc_pll_vote",
+ .parent_names = (const char *[]){ "bimc_pll" },
+ .num_parents = 1,
+ .ops = &clk_pll_vote_ops,
+ },
+};
+
static const struct parent_map gcc_xo_gpll0_map[] = {
{ P_XO, 0 },
{ P_GPLL0, 1 },
@@ -256,114 +364,6 @@ static const char * const gcc_xo_gpll1_emclk_sleep[] = {
"sleep_clk",
};
-static struct clk_pll gpll0 = {
- .l_reg = 0x21004,
- .m_reg = 0x21008,
- .n_reg = 0x2100c,
- .config_reg = 0x21010,
- .mode_reg = 0x21000,
- .status_reg = 0x2101c,
- .status_bit = 17,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gpll0",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .ops = &clk_pll_ops,
- },
-};
-
-static struct clk_regmap gpll0_vote = {
- .enable_reg = 0x45000,
- .enable_mask = BIT(0),
- .hw.init = &(struct clk_init_data){
- .name = "gpll0_vote",
- .parent_names = (const char *[]){ "gpll0" },
- .num_parents = 1,
- .ops = &clk_pll_vote_ops,
- },
-};
-
-static struct clk_pll gpll1 = {
- .l_reg = 0x20004,
- .m_reg = 0x20008,
- .n_reg = 0x2000c,
- .config_reg = 0x20010,
- .mode_reg = 0x20000,
- .status_reg = 0x2001c,
- .status_bit = 17,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gpll1",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .ops = &clk_pll_ops,
- },
-};
-
-static struct clk_regmap gpll1_vote = {
- .enable_reg = 0x45000,
- .enable_mask = BIT(1),
- .hw.init = &(struct clk_init_data){
- .name = "gpll1_vote",
- .parent_names = (const char *[]){ "gpll1" },
- .num_parents = 1,
- .ops = &clk_pll_vote_ops,
- },
-};
-
-static struct clk_pll gpll2 = {
- .l_reg = 0x4a004,
- .m_reg = 0x4a008,
- .n_reg = 0x4a00c,
- .config_reg = 0x4a010,
- .mode_reg = 0x4a000,
- .status_reg = 0x4a01c,
- .status_bit = 17,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "gpll2",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .ops = &clk_pll_ops,
- },
-};
-
-static struct clk_regmap gpll2_vote = {
- .enable_reg = 0x45000,
- .enable_mask = BIT(2),
- .hw.init = &(struct clk_init_data){
- .name = "gpll2_vote",
- .parent_names = (const char *[]){ "gpll2" },
- .num_parents = 1,
- .ops = &clk_pll_vote_ops,
- },
-};
-
-static struct clk_pll bimc_pll = {
- .l_reg = 0x23004,
- .m_reg = 0x23008,
- .n_reg = 0x2300c,
- .config_reg = 0x23010,
- .mode_reg = 0x23000,
- .status_reg = 0x2301c,
- .status_bit = 17,
- .clkr.hw.init = &(struct clk_init_data){
- .name = "bimc_pll",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
- .ops = &clk_pll_ops,
- },
-};
-
-static struct clk_regmap bimc_pll_vote = {
- .enable_reg = 0x45000,
- .enable_mask = BIT(3),
- .hw.init = &(struct clk_init_data){
- .name = "bimc_pll_vote",
- .parent_names = (const char *[]){ "bimc_pll" },
- .num_parents = 1,
- .ops = &clk_pll_vote_ops,
- },
-};
-
static struct clk_rcg2 pcnoc_bfdcd_clk_src = {
.cmd_rcgr = 0x27000,
.hid_width = 5,
--
2.35.1
next prev parent reply other threads:[~2022-06-19 21:27 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-19 21:27 [PATCH v3 0/7] clk: qcom: gcc-msm8916: modernize the driver Dmitry Baryshkov
2022-06-19 21:27 ` [PATCH v3 1/7] dt-bindings: clk: qcom,gcc-*: use qcom,gcc.yaml Dmitry Baryshkov
2022-06-20 12:05 ` Dmitry Baryshkov
2022-06-27 21:11 ` Marijn Suijten
2022-06-19 21:27 ` [PATCH v3 2/7] dt-bindings: clock: separate bindings for MSM8916 GCC device Dmitry Baryshkov
2022-06-20 12:06 ` Dmitry Baryshkov
2022-06-27 21:09 ` Marijn Suijten
2022-06-19 21:27 ` [PATCH v3 3/7] clk: qcom: gcc-msm8916: use ARRAY_SIZE instead of specifying num_parents Dmitry Baryshkov
2022-06-27 21:03 ` Marijn Suijten
2022-07-04 17:12 ` Dmitry Baryshkov
2022-06-19 21:27 ` Dmitry Baryshkov [this message]
2022-06-19 21:27 ` [PATCH v3 5/7] clk: qcom: gcc-msm8916: move gcc_mss_q6_bimc_axi_clk down Dmitry Baryshkov
2022-06-27 21:18 ` Marijn Suijten
2022-06-28 12:40 ` Dmitry Baryshkov
2022-06-19 21:27 ` [PATCH v3 6/7] clk: qcom: gcc-msm8916: use parent_hws/_data instead of parent_names Dmitry Baryshkov
2022-06-27 21:28 ` Marijn Suijten
2022-06-19 21:27 ` [PATCH v3 7/7] arm64: dts: qcom: msm8916: add clocks to the GCC device node Dmitry Baryshkov
2022-06-20 12:13 ` Konrad Dybcio
2022-06-27 21:29 ` Marijn Suijten
2022-06-20 12:12 ` [PATCH v3 0/7] clk: qcom: gcc-msm8916: modernize the driver Konrad Dybcio
2022-07-04 16:24 ` Dmitry Baryshkov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220619212735.1244953-5-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=marijn.suijten@somainline.org \
--cc=mturquette@baylibre.com \
--cc=quic_tdas@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=swboyd@chromium.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).