[PATCH v2 1/3] dt-bindings: phy: qcom,hdmi-phy-qmp: add clock-cells and XO clock

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

As the QMP HDMI PHY is a clock provider, add constant #clock-cells
property. For the compatibility with older DTs the property is not
marked as required. Also add the XO clock to the list of the clocks used
by the driver.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
index eea2e02678ed..41e6492d4a0f 100644
--- a/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml
@@ -28,12 +28,14 @@ properties:
       - const: hdmi_phy
 
   clocks:
-    maxItems: 2
+    minItems: 2
+    maxItems: 3
 
   clock-names:
     items:
       - const: iface
       - const: ref
+      - const: xo
 
   power-domains:
     maxItems: 1
@@ -44,6 +46,9 @@ properties:
   vddio-supply:
     description: phandle to VDD I/O supply regulator
 
+  '#clock-cells':
+    const: 0
+
   '#phy-cells':
     const: 0
 
@@ -75,9 +80,12 @@ examples:
                   "hdmi_phy";
 
       clocks = <&mmcc 116>,
-               <&gcc 214>;
+               <&gcc 214>,
+               <&xo_board>;
       clock-names = "iface",
-                    "ref";
+                    "ref",
+                    "xo";
+      #clock-cells = <0>;
       #phy-cells = <0>;
 
       vddio-supply = <&vreg_l12a_1p8>;
-- 
2.35.1