Re: [PATCH v6 1/2] mips: dts: ingenic: Add TCU clock to x1000/x1830 tcu device node

[Thomas Bogendoerfer <tsbogend@alpha.franken.de>]

On Fri, Jun 17, 2022 at 01:18:05PM +0100, Aidan MacDonald wrote:
> This clock is a gate for the TCU hardware block on these SoCs, but
> it wasn't included in the device tree since the ingenic-tcu driver
> erroneously did not request it.
> 
> Reviewed-by: Paul Cercueil <paul@crapouillou.net>
> Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
> ---
>  arch/mips/boot/dts/ingenic/x1000.dtsi | 5 +++--
>  arch/mips/boot/dts/ingenic/x1830.dtsi | 5 +++--
>  2 files changed, 6 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/mips/boot/dts/ingenic/x1000.dtsi b/arch/mips/boot/dts/ingenic/x1000.dtsi
> index b0a034b468bb..42e69664efd9 100644
> --- a/arch/mips/boot/dts/ingenic/x1000.dtsi
> +++ b/arch/mips/boot/dts/ingenic/x1000.dtsi
> @@ -111,8 +111,9 @@ tcu: timer@10002000 {
>  
>  		clocks = <&cgu X1000_CLK_RTCLK>,
>  			 <&cgu X1000_CLK_EXCLK>,
> -			 <&cgu X1000_CLK_PCLK>;
> -		clock-names = "rtc", "ext", "pclk";
> +			 <&cgu X1000_CLK_PCLK>,
> +			 <&cgu X1000_CLK_TCU>;
> +		clock-names = "rtc", "ext", "pclk", "tcu";
>  
>  		interrupt-controller;
>  		#interrupt-cells = <1>;
> diff --git a/arch/mips/boot/dts/ingenic/x1830.dtsi b/arch/mips/boot/dts/ingenic/x1830.dtsi
> index dbf21afaccb1..65a5da71c199 100644
> --- a/arch/mips/boot/dts/ingenic/x1830.dtsi
> +++ b/arch/mips/boot/dts/ingenic/x1830.dtsi
> @@ -104,8 +104,9 @@ tcu: timer@10002000 {
>  
>  		clocks = <&cgu X1830_CLK_RTCLK>,
>  			 <&cgu X1830_CLK_EXCLK>,
> -			 <&cgu X1830_CLK_PCLK>;
> -		clock-names = "rtc", "ext", "pclk";
> +			 <&cgu X1830_CLK_PCLK>,
> +			 <&cgu X1830_CLK_TCU>;
> +		clock-names = "rtc", "ext", "pclk", "tcu";
>  
>  		interrupt-controller;
>  		#interrupt-cells = <1>;
> -- 
> 2.35.1

applied to mips-fixes.

Thomas.

-- 
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea.                                                [ RFC1925, 2.3 ]