From: Rahul T R <r-ravikumar@ti.com>
To: <linux-phy@lists.infradead.org>, <kishon@ti.com>,
<vkoul@kernel.org>, <robh+dt@kernel.org>,
<krzysztof.kozlowski+dt@linaro.org>
Cc: <p.yadav@ti.com>, <tomi.valkeinen@ideasonboard.com>,
<laurent.pinchart@ideasonboard.com>,
<linux-kernel@vger.kernel.org>, <jpawar@cadence.com>,
<sjakhade@cadence.com>, <mparab@cadence.com>,
<devicetree@vger.kernel.org>, <vigneshr@ti.com>,
<lee.jones@linaro.org>, Rahul T R <r-ravikumar@ti.com>
Subject: [PATCH 2/3] phy: cdns-dphy: Add band config for dphy tx
Date: Tue, 21 Jun 2022 23:33:31 +0530 [thread overview]
Message-ID: <20220621180332.28767-3-r-ravikumar@ti.com> (raw)
In-Reply-To: <20220621180332.28767-1-r-ravikumar@ti.com>
Add support for band ctrl config for dphy tx.
Signed-off-by: Rahul T R <r-ravikumar@ti.com>
---
drivers/phy/cadence/cdns-dphy.c | 51 ++++++++++++++++++++++++++++++++-
1 file changed, 50 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index ba042e39cfaf..9940dbd38ea8 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -45,6 +45,10 @@
#define DPHY_CMN_OPDIV_FROM_REG BIT(6)
#define DPHY_CMN_OPDIV(x) ((x) << 7)
+#define DPHY_BAND_CFG DPHY_PCS(0x0)
+#define DPHY_BAND_CFG_LEFT_BAND GENMASK(4, 0)
+#define DPHY_BAND_CFG_RIGHT_BAND GENMASK(9, 5)
+
#define DPHY_PSM_CFG DPHY_PCS(0x4)
#define DPHY_PSM_CFG_FROM_REG BIT(0)
#define DPHY_PSM_CLK_DIV(x) ((x) << 1)
@@ -92,6 +96,22 @@ struct cdns_dphy {
struct phy *phy;
};
+struct cdns_dphy_band {
+ unsigned int min_rate;
+ unsigned int max_rate;
+};
+
+/* Order of bands is important since the index is the band number. */
+static struct cdns_dphy_band tx_bands[] = {
+ {80, 100}, {100, 120}, {120, 160}, {160, 200}, {200, 240},
+ {240, 320}, {320, 390}, {390, 450}, {450, 510}, {510, 560},
+ {560, 640}, {640, 690}, {690, 770}, {770, 870}, {870, 950},
+ {950, 1000}, {1000, 1200}, {1200, 1400}, {1400, 1600}, {1600, 1800},
+ {1800, 2000}, {2000, 2200}, {2200, 2500}
+};
+
+static int num_tx_bands = ARRAY_SIZE(tx_bands);
+
static int cdns_dsi_get_dphy_pll_cfg(struct cdns_dphy *dphy,
struct cdns_dphy_cfg *cfg,
struct phy_configure_opts_mipi_dphy *opts,
@@ -232,6 +252,26 @@ static int cdns_dphy_config_from_opts(struct phy *phy,
return 0;
}
+static int cdns_dphy_tx_get_band_ctrl(unsigned long hs_clk_rate)
+{
+ unsigned int rate;
+ int i;
+
+ rate = hs_clk_rate / 1000000UL;
+
+ if (rate < tx_bands[0].min_rate || rate >= tx_bands[num_tx_bands - 1].max_rate)
+ return -EOPNOTSUPP;
+
+ for (i = 0; i < num_tx_bands; i++) {
+ if (rate >= tx_bands[i].min_rate && rate < tx_bands[i].max_rate)
+ return i;
+ }
+
+ /* Unreachable. */
+ WARN(1, "Reached unreachable code.");
+ return -EINVAL;
+}
+
static int cdns_dphy_validate(struct phy *phy, enum phy_mode mode, int submode,
union phy_configure_opts *opts)
{
@@ -247,7 +287,8 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
{
struct cdns_dphy *dphy = phy_get_drvdata(phy);
struct cdns_dphy_cfg cfg = { 0 };
- int ret;
+ int ret, band_ctrl;
+ unsigned int reg;
ret = cdns_dphy_config_from_opts(phy, &opts->mipi_dphy, &cfg);
if (ret)
@@ -276,6 +317,14 @@ static int cdns_dphy_configure(struct phy *phy, union phy_configure_opts *opts)
*/
cdns_dphy_set_pll_cfg(dphy, &cfg);
+ band_ctrl = cdns_dphy_tx_get_band_ctrl(opts->mipi_dphy.hs_clk_rate);
+ if (band_ctrl < 0)
+ return band_ctrl;
+
+ reg = FIELD_PREP(DPHY_BAND_CFG_LEFT_BAND, band_ctrl) |
+ FIELD_PREP(DPHY_BAND_CFG_RIGHT_BAND, band_ctrl);
+ writel(reg, dphy->regs + DPHY_BAND_CFG);
+
return 0;
}
--
2.36.1
next prev parent reply other threads:[~2022-06-21 18:03 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-21 18:03 [PATCH 0/3] Add support for DPHY TX on J721E Rahul T R
2022-06-21 18:03 ` [PATCH 1/3] phy: dt-bindings: cdns,dphy: Add compatible for dphy on j721e Rahul T R
2022-06-21 18:03 ` Rahul T R [this message]
2022-06-21 23:07 ` [PATCH 2/3] phy: cdns-dphy: Add band config for dphy tx kernel test robot
2022-06-21 18:03 ` [PATCH 3/3] phy: cdns-dphy: Add support for DPHY TX on J721e Rahul T R
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220621180332.28767-3-r-ravikumar@ti.com \
--to=r-ravikumar@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=jpawar@cadence.com \
--cc=kishon@ti.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=lee.jones@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mparab@cadence.com \
--cc=p.yadav@ti.com \
--cc=robh+dt@kernel.org \
--cc=sjakhade@cadence.com \
--cc=tomi.valkeinen@ideasonboard.com \
--cc=vigneshr@ti.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).