devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Rahul T R <r-ravikumar@ti.com>
To: <linux-phy@lists.infradead.org>, <kishon@ti.com>,
	<vkoul@kernel.org>, <robh+dt@kernel.org>,
	<krzysztof.kozlowski+dt@linaro.org>
Cc: <p.yadav@ti.com>, <tomi.valkeinen@ideasonboard.com>,
	<laurent.pinchart@ideasonboard.com>,
	<linux-kernel@vger.kernel.org>, <jpawar@cadence.com>,
	<sjakhade@cadence.com>, <mparab@cadence.com>,
	<devicetree@vger.kernel.org>, <vigneshr@ti.com>,
	<lee.jones@linaro.org>, Rahul T R <r-ravikumar@ti.com>
Subject: [PATCH 3/3] phy: cdns-dphy: Add support for DPHY TX on J721e
Date: Tue, 21 Jun 2022 23:33:32 +0530	[thread overview]
Message-ID: <20220621180332.28767-4-r-ravikumar@ti.com> (raw)
In-Reply-To: <20220621180332.28767-1-r-ravikumar@ti.com>

Add support new compatible for dphy-tx on j721e
and implement dphy ops required.

Signed-off-by: Rahul T R <r-ravikumar@ti.com>
---
 drivers/phy/cadence/Kconfig     | 10 ++++++
 drivers/phy/cadence/cdns-dphy.c | 62 +++++++++++++++++++++++++++++++++
 2 files changed, 72 insertions(+)

diff --git a/drivers/phy/cadence/Kconfig b/drivers/phy/cadence/Kconfig
index 1adde2d99ae7..18024ac6d511 100644
--- a/drivers/phy/cadence/Kconfig
+++ b/drivers/phy/cadence/Kconfig
@@ -22,6 +22,16 @@ config PHY_CADENCE_DPHY
 	  system. If M is selected, the module will be called
 	  cdns-dphy.
 
+if PHY_CADENCE_DPHY
+
+config PHY_CADENCE_DPHY_J721E
+	depends on ARCH_K3 || COMPILE_TEST
+	bool "J721E DPHY TX Wiz support"
+	default y
+	help
+	  Support J721E Cadence DPHY TX Wiz configuration.
+endif
+
 config PHY_CADENCE_DPHY_RX
 	tristate "Cadence D-PHY Rx Support"
 	depends on HAS_IOMEM && OF
diff --git a/drivers/phy/cadence/cdns-dphy.c b/drivers/phy/cadence/cdns-dphy.c
index 9940dbd38ea8..8dc58d063a07 100644
--- a/drivers/phy/cadence/cdns-dphy.c
+++ b/drivers/phy/cadence/cdns-dphy.c
@@ -6,6 +6,7 @@
 #include <linux/bitops.h>
 #include <linux/clk.h>
 #include <linux/io.h>
+#include <linux/iopoll.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_device.h>
@@ -17,6 +18,7 @@
 
 #define REG_WAKEUP_TIME_NS		800
 #define DPHY_PLL_RATE_HZ		108000000
+#define POLL_TIMEOUT_US			1000
 
 /* DPHY registers */
 #define DPHY_PMA_CMN(reg)		(reg)
@@ -61,6 +63,18 @@
 #define DSI_NULL_FRAME_OVERHEAD		6
 #define DSI_EOT_PKT_SIZE		4
 
+#define DPHY_TX_J721E_WIZ_PLL_CTRL	0xF04
+#define DPHY_TX_J721E_WIZ_STATUS	0xF08
+#define DPHY_TX_J721E_WIZ_RST_CTRL	0xF0C
+#define DPHY_TX_J721E_WIZ_PSM_FREQ	0xF10
+
+#define DPHY_TX_J721E_WIZ_IPDIV		GENMASK(4, 0)
+#define DPHY_TX_J721E_WIZ_OPDIV		GENMASK(13, 8)
+#define DPHY_TX_J721E_WIZ_FBDIV		GENMASK(25, 16)
+#define DPHY_TX_J721E_WIZ_LANE_RSTB	BIT(31)
+#define DPHY_TX_WIZ_PLL_LOCK		BIT(31)
+#define DPHY_TX_WIZ_O_CMN_READY		BIT(31)
+
 struct cdns_dphy_cfg {
 	u8 pll_ipdiv;
 	u8 pll_opdiv;
@@ -219,6 +233,43 @@ static void cdns_dphy_ref_set_psm_div(struct cdns_dphy *dphy, u8 div)
 	       dphy->regs + DPHY_PSM_CFG);
 }
 
+#ifdef CONFIG_PHY_CADENCE_DPHY_J721E
+static unsigned long cdns_dphy_j721e_get_wakeup_time_ns(struct cdns_dphy *dphy)
+{
+	return 1000000;
+}
+
+static void cdns_dphy_j721e_set_pll_cfg(struct cdns_dphy *dphy,
+					const struct cdns_dphy_cfg *cfg)
+{
+	u32 status;
+
+	writel(DPHY_CMN_PWM_HIGH(6) | DPHY_CMN_PWM_LOW(0x101) |
+	       DPHY_CMN_PWM_DIV(0x8),
+	       dphy->regs + DPHY_CMN_PWM);
+
+	writel((FIELD_PREP(DPHY_TX_J721E_WIZ_IPDIV, cfg->pll_ipdiv) |
+		FIELD_PREP(DPHY_TX_J721E_WIZ_OPDIV, cfg->pll_opdiv) |
+		FIELD_PREP(DPHY_TX_J721E_WIZ_FBDIV, cfg->pll_fbdiv)),
+		dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL);
+
+	writel(DPHY_TX_J721E_WIZ_LANE_RSTB,
+	       dphy->regs + DPHY_TX_J721E_WIZ_RST_CTRL);
+
+	readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_PLL_CTRL, status,
+			   (status & DPHY_TX_WIZ_PLL_LOCK), 0, POLL_TIMEOUT_US);
+
+	readl_poll_timeout(dphy->regs + DPHY_TX_J721E_WIZ_STATUS, status,
+			   (status & DPHY_TX_WIZ_O_CMN_READY), 0,
+			   POLL_TIMEOUT_US);
+}
+
+static void cdns_dphy_j721e_set_psm_div(struct cdns_dphy *dphy, u8 div)
+{
+	writel(div, dphy->regs + DPHY_TX_J721E_WIZ_PSM_FREQ);
+}
+#endif /* !CONFIG_PHY_CADENCE_DPHY_J721E */
+
 /*
  * This is the reference implementation of DPHY hooks. Specific integration of
  * this IP may have to re-implement some of them depending on how they decided
@@ -230,6 +281,14 @@ static const struct cdns_dphy_ops ref_dphy_ops = {
 	.set_psm_div = cdns_dphy_ref_set_psm_div,
 };
 
+#ifdef CONFIG_PHY_CADENCE_DPHY_J721E
+static const struct cdns_dphy_ops j721e_dphy_ops = {
+	.get_wakeup_time_ns = cdns_dphy_j721e_get_wakeup_time_ns,
+	.set_pll_cfg = cdns_dphy_j721e_set_pll_cfg,
+	.set_psm_div = cdns_dphy_j721e_set_psm_div,
+};
+#endif /* !CONFIG_PHY_CADENCE_DPHY_J721E */
+
 static int cdns_dphy_config_from_opts(struct phy *phy,
 				      struct phy_configure_opts_mipi_dphy *opts,
 				      struct cdns_dphy_cfg *cfg)
@@ -419,6 +478,9 @@ static int cdns_dphy_remove(struct platform_device *pdev)
 
 static const struct of_device_id cdns_dphy_of_match[] = {
 	{ .compatible = "cdns,dphy", .data = &ref_dphy_ops },
+#ifdef CONFIG_PHY_CADENCE_DPHY_J721E
+	{ .compatible = "ti,j721e-dphy", .data = &j721e_dphy_ops },
+#endif /* !CONFIG_PHY_CADENCE_DPHY_J721E */
 	{ /* sentinel */ },
 };
 MODULE_DEVICE_TABLE(of, cdns_dphy_of_match);
-- 
2.36.1


      parent reply	other threads:[~2022-06-21 18:04 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-06-21 18:03 [PATCH 0/3] Add support for DPHY TX on J721E Rahul T R
2022-06-21 18:03 ` [PATCH 1/3] phy: dt-bindings: cdns,dphy: Add compatible for dphy on j721e Rahul T R
2022-06-21 18:03 ` [PATCH 2/3] phy: cdns-dphy: Add band config for dphy tx Rahul T R
2022-06-21 23:07   ` kernel test robot
2022-06-21 18:03 ` Rahul T R [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220621180332.28767-4-r-ravikumar@ti.com \
    --to=r-ravikumar@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jpawar@cadence.com \
    --cc=kishon@ti.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=lee.jones@linaro.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=mparab@cadence.com \
    --cc=p.yadav@ti.com \
    --cc=robh+dt@kernel.org \
    --cc=sjakhade@cadence.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    --cc=vigneshr@ti.com \
    --cc=vkoul@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).