From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by smtp.lore.kernel.org (Postfix) with ESMTP id 1723EC43334 for ; Wed, 22 Jun 2022 04:11:02 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1356822AbiFVELA (ORCPT ); Wed, 22 Jun 2022 00:11:00 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:42942 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1356757AbiFVEKl (ORCPT ); Wed, 22 Jun 2022 00:10:41 -0400 Received: from mail-oi1-x22e.google.com (mail-oi1-x22e.google.com [IPv6:2607:f8b0:4864:20::22e]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id F18D833E32 for ; Tue, 21 Jun 2022 21:10:24 -0700 (PDT) Received: by mail-oi1-x22e.google.com with SMTP id q11so19649370oih.10 for ; Tue, 21 Jun 2022 21:10:24 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; h=from:to:cc:subject:date:message-id:in-reply-to:references :mime-version:content-transfer-encoding; bh=WmV5CqX7PSrCsFb78/oFCaZXKS/0VAQmcXxZw7SW4qY=; b=uTqXYtWigDcUqjJqnmUknyy8MpM+n9VsybCG/QsmuJiDdw1p0AmUB92BfQx1PEnPAl /Vfkhj/pKIyLmaRyrlp6eLqmdwTDHWfH5AtV/EM/zl+btgdS39Uumr3R4FDyxpUir0nH hB6ZxhVHBNAapZNJhasMDhOyc2t2VzquPVp541NuuUXJV4gcs6cXY3mWaUJ/ev/exca2 nHjCK8QAtMSdG0Y3fnHxl5JDWKEUkosAOYfK8lDyblVtkvLciDIGDtSmEJPreWqLir0S 12FbIT8eqmm2H6naqRHiFUlot0YAu7ikxb/F7TvosxyZUCXxyMhLWftf5XVwVOn8F0g/ DOTw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20210112; h=x-gm-message-state:from:to:cc:subject:date:message-id:in-reply-to :references:mime-version:content-transfer-encoding; bh=WmV5CqX7PSrCsFb78/oFCaZXKS/0VAQmcXxZw7SW4qY=; b=t4kpVcJO/I669vIkD1yj3OpDJMbUMdE8BIDhwHpaiHidZmVYjXVNQxN2V2H+yT1le8 BdqV5ROit8GR8qaIebdN58Qttkeg5MaN/GhzCDnZGqUNQPq2VPWtvVq5eDGDSlmpGsbB z63PJ12XW9pw4lpcG2dbxN15pmRdUWQ8Sb9tGhynfeKMw+plBXbi007linMb65koQiQz UJmlCKAclSz4aufFMouPEi4R65xNi223ozOZO2k7k9YrAJ9KQitSd6Q4uh2hQk4SFvXL WGlJEuqfEKPqxarFeYMMrxqTKejoV7z7Tbwe/YyR/V1Uj4Vwh++2pEGW1rglJxf8O18o b+Lw== X-Gm-Message-State: AOAM5334pp08+oYK236kw9J/aluMtlv/ZhQZTb5JmMDBGxxeXc3DDiIa BySVipWkA6BWsckNUpIIlMlsug== X-Google-Smtp-Source: ABdhPJzMCXEUIxhaMEVugFdg/SS1UONLx8unL2U7+Pvj2pKzsKwLZSVWu4mdw93mfYiH+Bh1uiUFuQ== X-Received: by 2002:a05:6808:138c:b0:32e:714f:35e4 with SMTP id c12-20020a056808138c00b0032e714f35e4mr20747543oiw.229.1655871024302; Tue, 21 Jun 2022 21:10:24 -0700 (PDT) Received: from ripper.. (104-57-184-186.lightspeed.austtx.sbcglobal.net. [104.57.184.186]) by smtp.gmail.com with ESMTPSA id b7-20020a056870918700b000f2455e26acsm2314718oaf.48.2022.06.21.21.10.23 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 21 Jun 2022 21:10:23 -0700 (PDT) From: Bjorn Andersson To: Andy Gross , Bjorn Andersson , Krzysztof Kozlowski Cc: Rob Herring , Manivannan Sadhasivam , Jassi Brar , linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 5/6] arm64: dts: qcom: add SA8540P and ADP Date: Tue, 21 Jun 2022 21:12:23 -0700 Message-Id: <20220622041224.627803-6-bjorn.andersson@linaro.org> X-Mailer: git-send-email 2.35.1 In-Reply-To: <20220622041224.627803-1-bjorn.andersson@linaro.org> References: <20220622041224.627803-1-bjorn.andersson@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Precedence: bulk List-ID: X-Mailing-List: devicetree@vger.kernel.org Introduce the Qualcomm SA8540P automotive platform and the SA8295P ADP development board. The SA8540P and SC8280XP are fairly similar, so the SA8540P is built ontop of the SC8280XP dtsi to reduce duplication. As more advanced features are integrated this might be re-evaluated. This initial contribution supports SMP, CPUFreq, cluster idle, UFS, RPMh regulators, debug UART, PMICs, remoteprocs (NSPs crashes shortly after booting) and USB. The SA8295P ADP contains four PM8450 PMICs, which according to their revid are compatible with PM8150. They are defined within the ADP for now, to avoid creating additional .dtsi files for PM8150 with just addresses changed - and to allow using the labels from the schematics. Signed-off-by: Bjorn Andersson --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sa8295p-adp.dts | 427 +++++++++++++++++++++++ arch/arm64/boot/dts/qcom/sa8540p.dtsi | 133 +++++++ 3 files changed, 561 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/sa8295p-adp.dts create mode 100644 arch/arm64/boot/dts/qcom/sa8540p.dtsi diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index ceeae094a59f..2f416b84b71c 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -52,6 +52,7 @@ dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-1000.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs404-evb-4000.dtb dtb-$(CONFIG_ARCH_QCOM) += qrb5165-rb5.dtb dtb-$(CONFIG_ARCH_QCOM) += sa8155p-adp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sa8295p-adp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-idp.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1.dtb dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-coachz-r1-lte.dtb diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts new file mode 100644 index 000000000000..8dbcd95966b0 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts @@ -0,0 +1,427 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +/dts-v1/; + +#include +#include +#include +#include +#include + +#include "sa8540p.dtsi" + +/ { + model = "Qualcomm SA8295P ADP"; + compatible = "qcom,sa8295p-adp", "qcom,sa8540p"; + + aliases { + serial0 = &qup2_uart17; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + reserved-memory { + }; +}; + +&apps_rsc { + pmm8540-a-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_l3a: ldo3 { + regulator-name = "vreg_l3a"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l13a: ldo13 { + regulator-name = "vreg_l13a"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + }; + + pmm8540-c-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <912000>; + regulator-max-microvolt = <912000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <3072000>; + regulator-max-microvolt = <3072000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1208000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l10c: ldo10 { + regulator-name = "vreg_l10c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l17c: ldo17 { + regulator-name = "vreg_l17c"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <2504000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + }; + + pmm8540-g-regulators { + compatible = "qcom,pm8150-rpmh-regulators"; + qcom,pmic-id = "g"; + + vreg_l3g: ldo3 { + regulator-name = "vreg_l3g"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l7g: ldo7 { + regulator-name = "vreg_l7g"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + + vreg_l8g: ldo8 { + regulator-name = "vreg_l8g"; + regulator-min-microvolt = <880000>; + regulator-max-microvolt = <880000>; + regulator-initial-mode = ; + regulator-allow-set-load; + }; + }; +}; + +&qup2 { + status = "okay"; +}; + +&qup2_uart17 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&remoteproc_adsp { + status = "okay"; + firmware-name = "qcom/sa8540p/adsp.mbn"; +}; + +&remoteproc_nsp0 { + status = "okay"; + firmware-name = "qcom/sa8540p/cdsp.mbn"; +}; + +&remoteproc_nsp1 { + status = "okay"; + firmware-name = "qcom/sa8540p/cdsp1.mbn"; +}; + +&spmi_bus { + pm8450a: pmic@0 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450a_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450c: pmic@4 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x4 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450c_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450e: pmic@8 { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0x8 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450e_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; + + pm8450g: pmic@c { + compatible = "qcom,pm8150", "qcom,spmi-pmic"; + reg = <0xc SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pm8450g_gpios: gpio@c000 { + compatible = "qcom,pm8150-gpio"; + reg = <0xc000>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; +}; + +&ufs_mem_hc { + status = "okay"; + + reset-gpios = <&tlmm 228 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l17c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l6c>; + vccq-max-microamp = <900000>; +}; + +&ufs_mem_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; +}; + +&ufs_card_hc { + status = "okay"; + + reset-gpios = <&tlmm 229 GPIO_ACTIVE_LOW>; + + vcc-supply = <&vreg_l10c>; + vcc-max-microamp = <800000>; + vccq-supply = <&vreg_l3c>; + vccq-max-microamp = <900000>; +}; + +&ufs_card_phy { + status = "okay"; + + vdda-phy-supply = <&vreg_l8g>; + vdda-pll-supply = <&vreg_l3g>; +}; + +&usb_0 { + status = "okay"; +}; + +&usb_0_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "peripheral"; +}; + +&usb_0_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7a>; + vdda33-supply = <&vreg_l13a>; +}; + +&usb_0_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; +}; + +&usb_1 { + status = "okay"; +}; + +&usb_1_dwc3 { + /* TODO: Define USB-C connector properly */ + dr_mode = "host"; +}; + +&usb_1_hsphy { + status = "okay"; + + vdda-pll-supply = <&vreg_l1c>; + vdda18-supply = <&vreg_l7c>; + vdda33-supply = <&vreg_l2c>; +}; + +&usb_1_qmpphy { + status = "okay"; + + vdda-phy-supply = <&vreg_l4c>; + vdda-pll-supply = <&vreg_l1c>; +}; + +&usb_2_hsphy0 { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; +}; + +&usb_2_hsphy1 { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; +}; + +&usb_2_hsphy2 { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; +}; + +&usb_2_hsphy3 { + status = "okay"; + + vdda-pll-supply = <&vreg_l5a>; + vdda18-supply = <&vreg_l7g>; + vdda33-supply = <&vreg_l13a>; +}; + +&usb_2_qmpphy0 { + status = "okay"; + + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; +}; + +&usb_2_qmpphy1 { + status = "okay"; + + vdda-phy-supply = <&vreg_l3a>; + vdda-pll-supply = <&vreg_l5a>; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +/* PINCTRL */ +&pm8450c_gpios { + usb2_en_state: usb2-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pm8450e_gpios { + usb3_en_state: usb3-en-state { + pins = "gpio5"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; + +&pm8450g_gpios { + usb4_en_state: usb4-en-state { + pins = "gpio5"; + function = "normal"; + output-high; + power-source = <0>; + }; + + usb5_en_state: usb5-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <0>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/sa8540p.dtsi b/arch/arm64/boot/dts/qcom/sa8540p.dtsi new file mode 100644 index 000000000000..8ea2886fbab2 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sa8540p.dtsi @@ -0,0 +1,133 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2021, The Linux Foundation. All rights reserved. + * Copyright (c) 2022, Linaro Limited + */ + +#include "sc8280xp.dtsi" + +/delete-node/ &cpu0_opp_table; +/delete-node/ &cpu4_opp_table; + +/ { + cpu0_opp_table: cpu0-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-403200000 { + opp-hz = /bits/ 64 <403200000>; + }; + opp-499200000 { + opp-hz = /bits/ 64 <499200000>; + }; + opp-595200000 { + opp-hz = /bits/ 64 <595200000>; + }; + opp-710400000 { + opp-hz = /bits/ 64 <710400000>; + }; + opp-806400000 { + opp-hz = /bits/ 64 <806400000>; + }; + opp-902400000 { + opp-hz = /bits/ 64 <902400000>; + }; + opp-1017600000 { + opp-hz = /bits/ 64 <1017600000>; + }; + opp-1113600000 { + opp-hz = /bits/ 64 <1113600000>; + }; + opp-1209600000 { + opp-hz = /bits/ 64 <1209600000>; + }; + opp-1324800000 { + opp-hz = /bits/ 64 <1324800000>; + }; + opp-1440000000 { + opp-hz = /bits/ 64 <1440000000>; + }; + opp-1555200000 { + opp-hz = /bits/ 64 <1555200000>; + }; + opp-1670400000 { + opp-hz = /bits/ 64 <1670400000>; + }; + opp-1785600000 { + opp-hz = /bits/ 64 <1785600000>; + }; + opp-1881600000 { + opp-hz = /bits/ 64 <1881600000>; + }; + opp-2016000000 { + opp-hz = /bits/ 64 <2016000000>; + }; + opp-2131200000 { + opp-hz = /bits/ 64 <2131200000>; + }; + opp-2246400000 { + opp-hz = /bits/ 64 <2246400000>; + }; + }; + + cpu4_opp_table: cpu4-opp-table { + compatible = "operating-points-v2"; + opp-shared; + + opp-825600000 { + opp-hz = /bits/ 64 <825600000>; + }; + opp-940800000 { + opp-hz = /bits/ 64 <940800000>; + }; + opp-1056000000 { + opp-hz = /bits/ 64 <1056000000>; + }; + opp-1171200000 { + opp-hz = /bits/ 64 <1171200000>; + }; + opp-1286400000 { + opp-hz = /bits/ 64 <1286400000>; + }; + opp-1401600000 { + opp-hz = /bits/ 64 <1401600000>; + }; + opp-1516800000 { + opp-hz = /bits/ 64 <1516800000>; + }; + opp-1632000000 { + opp-hz = /bits/ 64 <1632000000>; + }; + opp-1747200000 { + opp-hz = /bits/ 64 <1747200000>; + }; + opp-1862400000 { + opp-hz = /bits/ 64 <1862400000>; + }; + opp-1977600000 { + opp-hz = /bits/ 64 <1977600000>; + }; + opp-2073600000 { + opp-hz = /bits/ 64 <2073600000>; + }; + opp-2169600000 { + opp-hz = /bits/ 64 <2169600000>; + }; + opp-2284800000 { + opp-hz = /bits/ 64 <2284800000>; + }; + opp-2380800000 { + opp-hz = /bits/ 64 <2380800000>; + }; + opp-2496000000 { + opp-hz = /bits/ 64 <2496000000>; + }; + opp-2592000000 { + opp-hz = /bits/ 64 <2592000000>; + }; + }; +}; + +&rpmhpd { + compatible = "qcom,sa8540p-rpmhpd"; +}; -- 2.35.1