From: Xavier Roumegue <xavier.roumegue@oss.nxp.com>
To: mchehab@kernel.org, hverkuil-cisco@xs4all.nl,
stanimir.varbanov@linaro.org, laurent.pinchart@ideasonboard.com,
tomi.valkeinen@ideasonboard.com, robh+dt@kernel.org,
nicolas@ndufresne.ca, alexander.stein@ew.tq-group.com
Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org
Subject: [PATCH v6 05/14] v4l2-ctrls: alloc arrays in ctrl_ref
Date: Thu, 23 Jun 2022 16:31:06 +0200 [thread overview]
Message-ID: <20220623143115.3185297-6-xavier.roumegue@oss.nxp.com> (raw)
In-Reply-To: <20220623143115.3185297-1-xavier.roumegue@oss.nxp.com>
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
drivers/media/v4l2-core/v4l2-ctrls-api.c | 2 +-
drivers/media/v4l2-core/v4l2-ctrls-core.c | 31 ++++++++++++++---------
include/media/v4l2-ctrls.h | 16 ++++++------
3 files changed, 28 insertions(+), 21 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-api.c b/drivers/media/v4l2-core/v4l2-ctrls-api.c
index 1b90bd7c4010..6f1b72c59e8e 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-api.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-api.c
@@ -467,7 +467,7 @@ int v4l2_g_ext_ctrls_common(struct v4l2_ctrl_handler *hdl,
if (is_default)
ret = def_to_user(cs->controls + idx, ref->ctrl);
- else if (is_request && ref->p_req_dyn_enomem)
+ else if (is_request && ref->p_req_array_enomem)
ret = -ENOMEM;
else if (is_request && ref->p_req_valid)
ret = req_to_user(cs->controls + idx, ref);
diff --git a/drivers/media/v4l2-core/v4l2-ctrls-core.c b/drivers/media/v4l2-core/v4l2-ctrls-core.c
index 1372b7b45681..38030a7cb233 100644
--- a/drivers/media/v4l2-core/v4l2-ctrls-core.c
+++ b/drivers/media/v4l2-core/v4l2-ctrls-core.c
@@ -1048,23 +1048,26 @@ void cur_to_new(struct v4l2_ctrl *ctrl)
ptr_to_ptr(ctrl, ctrl->p_cur, ctrl->p_new, ctrl->new_elems);
}
-static bool req_alloc_dyn_array(struct v4l2_ctrl_ref *ref, u32 elems)
+static bool req_alloc_array(struct v4l2_ctrl_ref *ref, u32 elems)
{
void *tmp;
- if (elems < ref->p_req_dyn_alloc_elems)
+ if (elems == ref->p_req_array_alloc_elems)
+ return true;
+ if (ref->ctrl->is_dyn_array &&
+ elems < ref->p_req_array_alloc_elems)
return true;
tmp = kvmalloc(elems * ref->ctrl->elem_size, GFP_KERNEL);
if (!tmp) {
- ref->p_req_dyn_enomem = true;
+ ref->p_req_array_enomem = true;
return false;
}
- ref->p_req_dyn_enomem = false;
+ ref->p_req_array_enomem = false;
kvfree(ref->p_req.p);
ref->p_req.p = tmp;
- ref->p_req_dyn_alloc_elems = elems;
+ ref->p_req_array_alloc_elems = elems;
return true;
}
@@ -1077,7 +1080,7 @@ void new_to_req(struct v4l2_ctrl_ref *ref)
return;
ctrl = ref->ctrl;
- if (ctrl->is_dyn_array && !req_alloc_dyn_array(ref, ctrl->new_elems))
+ if (ctrl->is_array && !req_alloc_array(ref, ctrl->new_elems))
return;
ref->p_req_elems = ctrl->new_elems;
@@ -1094,7 +1097,7 @@ void cur_to_req(struct v4l2_ctrl_ref *ref)
return;
ctrl = ref->ctrl;
- if (ctrl->is_dyn_array && !req_alloc_dyn_array(ref, ctrl->elems))
+ if (ctrl->is_array && !req_alloc_array(ref, ctrl->elems))
return;
ref->p_req_elems = ctrl->elems;
@@ -1123,14 +1126,18 @@ int req_to_new(struct v4l2_ctrl_ref *ref)
return 0;
}
- /* Not a dynamic array, so just copy the request value */
- if (!ctrl->is_dyn_array) {
+ /* Not an array, so just copy the request value */
+ if (!ctrl->is_array) {
ptr_to_ptr(ctrl, ref->p_req, ctrl->p_new, ctrl->new_elems);
return 0;
}
/* Sanity check, should never happen */
- if (WARN_ON(!ref->p_req_dyn_alloc_elems))
+ if (WARN_ON(!ref->p_req_array_alloc_elems))
+ return -ENOMEM;
+
+ if (!ctrl->is_dyn_array &&
+ ref->p_req_elems != ctrl->p_array_alloc_elems)
return -ENOMEM;
/*
@@ -1243,7 +1250,7 @@ void v4l2_ctrl_handler_free(struct v4l2_ctrl_handler *hdl)
/* Free all nodes */
list_for_each_entry_safe(ref, next_ref, &hdl->ctrl_refs, node) {
list_del(&ref->node);
- if (ref->p_req_dyn_alloc_elems)
+ if (ref->p_req_array_alloc_elems)
kvfree(ref->p_req.p);
kfree(ref);
}
@@ -1368,7 +1375,7 @@ int handler_new_ref(struct v4l2_ctrl_handler *hdl,
if (hdl->error)
return hdl->error;
- if (allocate_req && !ctrl->is_dyn_array)
+ if (allocate_req && !ctrl->is_array)
size_extra_req = ctrl->elems * ctrl->elem_size;
new_ref = kzalloc(sizeof(*new_ref) + size_extra_req, GFP_KERNEL);
if (!new_ref)
diff --git a/include/media/v4l2-ctrls.h b/include/media/v4l2-ctrls.h
index a2f147873265..e0f32e8b886a 100644
--- a/include/media/v4l2-ctrls.h
+++ b/include/media/v4l2-ctrls.h
@@ -324,15 +324,15 @@ struct v4l2_ctrl {
* from a cluster with multiple controls twice (when the first
* control of a cluster is applied, they all are).
* @p_req_valid: If set, then p_req contains the control value for the request.
- * @p_req_dyn_enomem: If set, then p_req is invalid since allocating space for
- * a dynamic array failed. Attempting to read this value shall
- * result in ENOMEM. Only valid if ctrl->is_dyn_array is true.
- * @p_req_dyn_alloc_elems: The number of elements allocated for the dynamic
- * array. Only valid if @p_req_valid and ctrl->is_dyn_array are
+ * @p_req_array_enomem: If set, then p_req is invalid since allocating space for
+ * an array failed. Attempting to read this value shall
+ * result in ENOMEM. Only valid if ctrl->is_array is true.
+ * @p_req_array_alloc_elems: The number of elements allocated for the
+ * array. Only valid if @p_req_valid and ctrl->is_array are
* true.
* @p_req_elems: The number of elements in @p_req. This is the same as
* ctrl->elems, except for dynamic arrays. In that case it is in
- * the range of 1 to @p_req_dyn_alloc_elems. Only valid if
+ * the range of 1 to @p_req_array_alloc_elems. Only valid if
* @p_req_valid is true.
* @p_req: If the control handler containing this control reference
* is bound to a media request, then this points to the
@@ -354,8 +354,8 @@ struct v4l2_ctrl_ref {
bool from_other_dev;
bool req_done;
bool p_req_valid;
- bool p_req_dyn_enomem;
- u32 p_req_dyn_alloc_elems;
+ bool p_req_array_enomem;
+ u32 p_req_array_alloc_elems;
u32 p_req_elems;
union v4l2_ctrl_ptr p_req;
};
--
2.36.1
next prev parent reply other threads:[~2022-06-23 14:32 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-23 14:31 [PATCH v6 00/14] i.MX8MP DW100 dewarper driver Xavier Roumegue
2022-06-23 14:31 ` [PATCH v6 01/14] videodev2.h: add V4L2_CTRL_FLAG_DYNAMIC_ARRAY Xavier Roumegue
2022-07-08 9:58 ` Laurent Pinchart
2022-06-23 14:31 ` [PATCH v6 02/14] v4l2-ctrls: add support for dynamically allocated arrays Xavier Roumegue
2022-06-23 14:31 ` [PATCH v6 03/14] vivid: add dynamic array test control Xavier Roumegue
2022-06-23 14:31 ` [PATCH v6 04/14] v4l2-ctrls: allocate space for arrays Xavier Roumegue
2022-06-23 14:31 ` Xavier Roumegue [this message]
2022-06-23 14:31 ` [PATCH v6 06/14] v4l2-ctrls: add v4l2_ctrl_modify_dimensions Xavier Roumegue
2022-06-23 14:31 ` [PATCH v6 07/14] v4l2-ctrls: add event Xavier Roumegue
2022-06-23 14:31 ` [PATCH v6 08/14] vivid: add pixel_array test control Xavier Roumegue
2022-06-23 14:31 ` [PATCH v6 09/14] media: Documentation: dw100: Add user documentation for the DW100 driver Xavier Roumegue
2022-06-23 14:31 ` [PATCH v6 10/14] media: v4l: uapi: Add user control base for DW100 controls Xavier Roumegue
2022-06-23 14:31 ` [PATCH v6 11/14] media: uapi: Add a control for DW100 driver Xavier Roumegue
2022-07-08 10:50 ` Laurent Pinchart
2022-06-23 14:31 ` [PATCH v6 12/14] media: dt-bindings: media: Add i.MX8MP DW100 binding Xavier Roumegue
2022-06-30 21:57 ` Rob Herring
2022-06-23 14:31 ` [PATCH v6 13/14] media: dw100: Add i.MX8MP dw100 dewarper driver Xavier Roumegue
2022-07-08 10:12 ` Hans Verkuil
2022-07-08 12:03 ` Laurent Pinchart
2022-07-08 10:48 ` Ezequiel Garcia
2022-06-23 14:31 ` [PATCH v6 14/14] media: MAINTAINERS: add entry for i.MX8MP DW100 v4l2 mem2mem driver Xavier Roumegue
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220623143115.3185297-6-xavier.roumegue@oss.nxp.com \
--to=xavier.roumegue@oss.nxp.com \
--cc=alexander.stein@ew.tq-group.com \
--cc=devicetree@vger.kernel.org \
--cc=hverkuil-cisco@xs4all.nl \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=nicolas@ndufresne.ca \
--cc=robh+dt@kernel.org \
--cc=stanimir.varbanov@linaro.org \
--cc=tomi.valkeinen@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).