From: Aradhya Bhatia <a-bhatia1@ti.com>
To: Tomi Valkeinen <tomba@kernel.org>, Jyri Sarha <jyri.sarha@iki.fi>,
Rob Herring <robh+dt@kernel.org>, David Airlie <airlied@linux.ie>,
Daniel Vetter <daniel@ffwll.ch>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>
Cc: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>,
Rahul T R <r-ravikumar@ti.com>, Devarsh Thakkar <devarsht@ti.com>,
DRI Development List <dri-devel@lists.freedesktop.org>,
Devicetree List <devicetree@vger.kernel.org>,
Linux Kernel List <linux-kernel@vger.kernel.org>,
Aradhya Bhatia <a-bhatia1@ti.com>
Subject: [PATCH v3 2/2] drm/tidss: Add support for AM625 DSS
Date: Mon, 27 Jun 2022 20:42:00 +0530 [thread overview]
Message-ID: <20220627151200.4693-3-a-bhatia1@ti.com> (raw)
In-Reply-To: <20220627151200.4693-1-a-bhatia1@ti.com>
Add support for the DSS IP on TI's new AM625 SoC in the tidss driver.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Reviewed-by: Rahul T R <r-ravikumar@ti.com>
---
drivers/gpu/drm/tidss/tidss_dispc.c | 56 ++++++++++++++++++++++++++++-
drivers/gpu/drm/tidss/tidss_dispc.h | 2 ++
drivers/gpu/drm/tidss/tidss_drv.c | 1 +
3 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.c b/drivers/gpu/drm/tidss/tidss_dispc.c
index dae47853b728..f084f0688a54 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.c
+++ b/drivers/gpu/drm/tidss/tidss_dispc.c
@@ -272,6 +272,55 @@ const struct dispc_features dispc_j721e_feats = {
.vid_order = { 1, 3, 0, 2 },
};
+const struct dispc_features dispc_am625_feats = {
+ .max_pclk_khz = {
+ [DISPC_VP_DPI] = 165000,
+ [DISPC_VP_OLDI] = 165000,
+ },
+
+ .scaling = {
+ .in_width_max_5tap_rgb = 1280,
+ .in_width_max_3tap_rgb = 2560,
+ .in_width_max_5tap_yuv = 2560,
+ .in_width_max_3tap_yuv = 4096,
+ .upscale_limit = 16,
+ .downscale_limit_5tap = 4,
+ .downscale_limit_3tap = 2,
+ /*
+ * The max supported pixel inc value is 255. The value
+ * of pixel inc is calculated like this: 1+(xinc-1)*bpp.
+ * The maximum bpp of all formats supported by the HW
+ * is 8. So the maximum supported xinc value is 32,
+ * because 1+(32-1)*8 < 255 < 1+(33-1)*4.
+ */
+ .xinc_max = 32,
+ },
+
+ .subrev = DISPC_AM625,
+
+ .common = "common",
+ .common_regs = tidss_am65x_common_regs,
+
+ .num_vps = 2,
+ .vp_name = { "vp1", "vp2" },
+ .ovr_name = { "ovr1", "ovr2" },
+ .vpclk_name = { "vp1", "vp2" },
+ .vp_bus_type = { DISPC_VP_OLDI, DISPC_VP_DPI },
+
+ .vp_feat = { .color = {
+ .has_ctm = true,
+ .gamma_size = 256,
+ .gamma_type = TIDSS_GAMMA_8BIT,
+ },
+ },
+
+ .num_planes = 2,
+ /* note: vid is plane_id 0 and vidl1 is plane_id 1 */
+ .vid_name = { "vid", "vidl1" },
+ .vid_lite = { false, true, },
+ .vid_order = { 1, 0 },
+};
+
static const u16 *dispc_common_regmap;
struct dss_vp_data {
@@ -775,6 +824,7 @@ dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc)
return dispc_k2g_read_and_clear_irqstatus(dispc);
case DISPC_AM65X:
case DISPC_J721E:
+ case DISPC_AM625:
return dispc_k3_read_and_clear_irqstatus(dispc);
default:
WARN_ON(1);
@@ -790,6 +840,7 @@ void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask)
break;
case DISPC_AM65X:
case DISPC_J721E:
+ case DISPC_AM625:
dispc_k3_set_irqenable(dispc, mask);
break;
default:
@@ -1279,6 +1330,7 @@ void dispc_ovr_set_plane(struct dispc_device *dispc, u32 hw_plane,
x, y, layer);
break;
case DISPC_AM65X:
+ case DISPC_AM625:
dispc_am65x_ovr_set_plane(dispc, hw_plane, hw_videoport,
x, y, layer);
break;
@@ -2202,6 +2254,7 @@ static void dispc_plane_init(struct dispc_device *dispc)
break;
case DISPC_AM65X:
case DISPC_J721E:
+ case DISPC_AM625:
dispc_k3_plane_init(dispc);
break;
default:
@@ -2307,6 +2360,7 @@ static void dispc_vp_write_gamma_table(struct dispc_device *dispc,
dispc_k2g_vp_write_gamma_table(dispc, hw_videoport);
break;
case DISPC_AM65X:
+ case DISPC_AM625:
dispc_am65x_vp_write_gamma_table(dispc, hw_videoport);
break;
case DISPC_J721E:
@@ -2580,7 +2634,7 @@ int dispc_runtime_resume(struct dispc_device *dispc)
REG_GET(dispc, DSS_SYSSTATUS, 2, 2),
REG_GET(dispc, DSS_SYSSTATUS, 3, 3));
- if (dispc->feat->subrev == DISPC_AM65X)
+ if (dispc->feat->subrev == DISPC_AM65X || dispc->feat->subrev == DISPC_AM625)
dev_dbg(dispc->dev, "OLDI RESETDONE %d,%d,%d\n",
REG_GET(dispc, DSS_SYSSTATUS, 5, 5),
REG_GET(dispc, DSS_SYSSTATUS, 6, 6),
diff --git a/drivers/gpu/drm/tidss/tidss_dispc.h b/drivers/gpu/drm/tidss/tidss_dispc.h
index e49432f0abf5..a28005dafdc9 100644
--- a/drivers/gpu/drm/tidss/tidss_dispc.h
+++ b/drivers/gpu/drm/tidss/tidss_dispc.h
@@ -61,6 +61,7 @@ enum dispc_dss_subrevision {
DISPC_K2G,
DISPC_AM65X,
DISPC_J721E,
+ DISPC_AM625,
};
struct dispc_features {
@@ -88,6 +89,7 @@ struct dispc_features {
extern const struct dispc_features dispc_k2g_feats;
extern const struct dispc_features dispc_am65x_feats;
extern const struct dispc_features dispc_j721e_feats;
+extern const struct dispc_features dispc_am625_feats;
void dispc_set_irqenable(struct dispc_device *dispc, dispc_irq_t mask);
dispc_irq_t dispc_read_and_clear_irqstatus(struct dispc_device *dispc);
diff --git a/drivers/gpu/drm/tidss/tidss_drv.c b/drivers/gpu/drm/tidss/tidss_drv.c
index 04cfff89ee51..326059e99696 100644
--- a/drivers/gpu/drm/tidss/tidss_drv.c
+++ b/drivers/gpu/drm/tidss/tidss_drv.c
@@ -235,6 +235,7 @@ static const struct of_device_id tidss_of_table[] = {
{ .compatible = "ti,k2g-dss", .data = &dispc_k2g_feats, },
{ .compatible = "ti,am65x-dss", .data = &dispc_am65x_feats, },
{ .compatible = "ti,j721e-dss", .data = &dispc_j721e_feats, },
+ { .compatible = "ti,am625-dss", .data = &dispc_am625_feats, },
{ }
};
--
2.36.1
next prev parent reply other threads:[~2022-06-27 15:13 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-27 15:11 [PATCH v3 0/2] Add DSS support for AM625 SoC Aradhya Bhatia
2022-06-27 15:11 ` [PATCH v3 1/2] dt-bindings: display: ti,am65x-dss: Add am625 dss compatible Aradhya Bhatia
2022-06-29 10:40 ` Krzysztof Kozlowski
2022-06-27 15:12 ` Aradhya Bhatia [this message]
2022-07-28 12:04 ` [PATCH v3 2/2] drm/tidss: Add support for AM625 DSS Tomi Valkeinen
2022-08-09 6:08 ` Aradhya Bhatia
2022-08-09 6:31 ` Tomi Valkeinen
2022-08-09 9:21 ` Aradhya Bhatia
2022-08-09 9:57 ` Tomi Valkeinen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220627151200.4693-3-a-bhatia1@ti.com \
--to=a-bhatia1@ti.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=devarsht@ti.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jyri.sarha@iki.fi \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nm@ti.com \
--cc=r-ravikumar@ti.com \
--cc=robh+dt@kernel.org \
--cc=tomba@kernel.org \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).