From: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
To: tommaso.merciai@amarulasolutions.com
Cc: linuxfancy@googlegroups.com, linux-amarula@amarulasolutions.com,
quentin.schulz@theobroma-systems.com,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
Sakari Ailus <sakari.ailus@iki.fi>,
Daniel Scally <djrscally@gmail.com>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 5/6] media: dt-bindings: ov5693: document YAML binding
Date: Thu, 30 Jun 2022 09:45:24 +0200 [thread overview]
Message-ID: <20220630074525.481790-6-tommaso.merciai@amarulasolutions.com> (raw)
In-Reply-To: <20220630074525.481790-1-tommaso.merciai@amarulasolutions.com>
Add documentation of device tree in YAML schema for the OV5693
CMOS image sensor from Omnivision
Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Sakari Ailus <sakari.ailus@iki.fi>
---
Changes since v1:
- Fix allOf position as suggested by Krzysztof
- Remove port description as suggested by Krzysztof
- Fix EOF as suggested by Krzysztof
Changes since v2:
- Fix commit body as suggested by Krzysztof
Changes since v3:
- Add reviewed-by tags, ssuggested by Jacopo, Krzysztof
.../bindings/media/i2c/ovti,ov5693.yaml | 106 ++++++++++++++++++
MAINTAINERS | 1 +
2 files changed, 107 insertions(+)
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
new file mode 100644
index 000000000000..b83c9fc04023
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
@@ -0,0 +1,106 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2022 Amarulasolutions
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/ovti,ov5693.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Omnivision OV5693 CMOS Sensor
+
+maintainers:
+ - Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
+
+description: |
+ The Omnivision OV5693 is a high performance, 1/4-inch, 5 megapixel, CMOS
+ image sensor that delivers 2592x1944 at 30fps. It provides full-frame,
+ sub-sampled, and windowed 10-bit MIPI images in various formats via the
+ Serial Camera Control Bus (SCCB) interface.
+
+ OV5693 is controlled via I2C and two-wire Serial Camera Control Bus (SCCB).
+ The sensor output is available via CSI-2 serial data output (up to 2-lane).
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ const: ovti,ov5693
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description:
+ System input clock (aka XVCLK). From 6 to 27 MHz.
+ maxItems: 1
+
+ dovdd-supply:
+ description:
+ Digital I/O voltage supply, 1.8V.
+
+ avdd-supply:
+ description:
+ Analog voltage supply, 2.8V.
+
+ dvdd-supply:
+ description:
+ Digital core voltage supply, 1.2V.
+
+ reset-gpios:
+ description:
+ The phandle and specifier for the GPIO that controls sensor reset.
+ This corresponds to the hardware pin XSHUTDN which is physically
+ active low.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - dovdd-supply
+ - avdd-supply
+ - dvdd-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/px30-cru.h>
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/pinctrl/rockchip.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ov5693: camera@36 {
+ compatible = "ovti,ov5693";
+ reg = <0x36>;
+
+ reset-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&cif_clkout_m0>;
+
+ clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clocks = <&cru SCLK_CIF_OUT>;
+ assigned-clock-rates = <19200000>;
+
+ avdd-supply = <&vcc_1v8>;
+ dvdd-supply = <&vcc_1v2>;
+ dovdd-supply = <&vcc_2v8>;
+
+ rotation = <90>;
+ orientation = <0>;
+
+ port {
+ ucam_out: endpoint {
+ remote-endpoint = <&mipi_in_ucam>;
+ data-lanes = <1 2>;
+ link-frequencies = /bits/ 64 <450000000>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 1fc9ead83d2a..844307cb20c4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14719,6 +14719,7 @@ M: Daniel Scally <djrscally@gmail.com>
L: linux-media@vger.kernel.org
S: Maintained
T: git git://linuxtv.org/media_tree.git
+F: Documentation/devicetree/bindings/media/i2c/ovti,ov5693.yaml
F: drivers/media/i2c/ov5693.c
OMNIVISION OV5695 SENSOR DRIVER
--
2.25.1
next parent reply other threads:[~2022-06-30 7:45 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20220630074525.481790-1-tommaso.merciai@amarulasolutions.com>
2022-06-30 7:45 ` Tommaso Merciai [this message]
2022-06-30 8:07 ` [PATCH v4 5/6] media: dt-bindings: ov5693: document YAML binding Krzysztof Kozlowski
2022-06-30 9:02 ` Tommaso Merciai
2022-06-30 9:12 ` Sakari Ailus
2022-06-30 9:16 ` Tommaso Merciai
2022-06-30 9:50 ` Sakari Ailus
2022-06-30 10:09 ` Tommaso Merciai
2022-06-30 10:15 ` Daniel Scally
2022-06-30 11:21 ` Sakari Ailus
2022-06-30 13:56 ` Tommaso Merciai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220630074525.481790-6-tommaso.merciai@amarulasolutions.com \
--to=tommaso.merciai@amarulasolutions.com \
--cc=devicetree@vger.kernel.org \
--cc=djrscally@gmail.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-amarula@amarulasolutions.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linuxfancy@googlegroups.com \
--cc=mchehab@kernel.org \
--cc=quentin.schulz@theobroma-systems.com \
--cc=robh+dt@kernel.org \
--cc=sakari.ailus@iki.fi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox