From: Peter Chiu <chui-hao.chiu@mediatek.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Matthias Brugger <matthias.bgg@gmail.com>
Cc: <devicetree@vger.kernel.org>, Ryder Lee <ryder.Lee@mediatek.com>,
"Evelyn Tsai" <evelyn.tsai@mediatek.com>,
Sam Shih <sam.shih@mediatek.com>,
<linux-arm-kernel@lists.infradead.org>,
<linux-mediatek@lists.infradead.org>,
<linux-kernel@vger.kernel.org>,
Peter Chiu <chui-hao.chiu@mediatek.com>
Subject: [PATCH v4] arm64: dts: mt7986: add built-in Wi-Fi device nodes
Date: Thu, 30 Jun 2022 17:49:09 +0800 [thread overview]
Message-ID: <20220630094909.8014-1-chui-hao.chiu@mediatek.com> (raw)
This enables built-in 802.11ax Wi-Fi support.
Reviewed-by: Sam Shih <sam.shih@mediatek.com>
Reviewed-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
---
v2: add clocks and clock-names.
v3: rename wmac to wifi and change underscores to dash in node names.
v4: rebase to the latest codebase.
---
arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts | 41 +++++++++++++++++++
arch/arm64/boot/dts/mediatek/mt7986a.dtsi | 23 +++++++++++
arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts | 43 ++++++++++++++++++++
3 files changed, 107 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
index 882277a..28cd168 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-rfb.dts
@@ -115,6 +115,13 @@ &uart2 {
status = "okay";
};
+&wifi {
+ status = "okay";
+ pinctrl-names = "default", "dbdc";
+ pinctrl-0 = <&wf_2g_5g_pins>;
+ pinctrl-1 = <&wf_dbdc_pins>;
+};
+
&pio {
uart1_pins: uart1-pins {
mux {
@@ -129,4 +136,38 @@ mux {
groups = "uart2";
};
};
+
+ wf_2g_5g_pins: wf-2g-5g-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_2g", "wf_5g";
+ };
+ conf {
+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+ "WF1_TOP_CLK", "WF1_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
+
+ wf_dbdc_pins: wf-dbdc-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_dbdc";
+ };
+ conf {
+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+ "WF1_TOP_CLK", "WF1_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index e3a407d..890ded0 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -7,6 +7,7 @@
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/clock/mt7986-clk.h>
+#include <dt-bindings/reset/mt7986-resets.h>
/ {
interrupt-parent = <&gic>;
@@ -70,6 +71,11 @@ secmon_reserved: secmon@43000000 {
reg = <0 0x43000000 0 0x30000>;
no-map;
};
+
+ wmcpu_emi: wmcpu-reserved@4fc00000 {
+ no-map;
+ reg = <0 0x4fc00000 0 0x00100000>;
+ };
};
timer {
@@ -261,6 +267,23 @@ eth: ethernet@15100000 {
#size-cells = <0>;
status = "disabled";
};
+
+ wifi: wifi@18000000 {
+ compatible = "mediatek,mt7986-wmac";
+ resets = <&watchdog MT7986_TOPRGU_CONSYS_SW_RST>;
+ reset-names = "consys";
+ clocks = <&topckgen CLK_TOP_CONN_MCUSYS_SEL>,
+ <&topckgen CLK_TOP_AP2CNN_HOST_SEL>;
+ clock-names = "mcu", "ap2conn";
+ reg = <0 0x18000000 0 0x1000000>,
+ <0 0x10003000 0 0x1000>,
+ <0 0x11d10000 0 0x1000>;
+ interrupts = <GIC_SPI 213 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 214 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 215 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 216 IRQ_TYPE_LEVEL_HIGH>;
+ memory-region = <&wmcpu_emi>;
+ };
};
};
diff --git a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
index 0f49d57..7f21b10 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986b-rfb.dts
@@ -98,3 +98,46 @@ fixed-link {
};
};
};
+
+&wifi {
+ status = "okay";
+ pinctrl-names = "default", "dbdc";
+ pinctrl-0 = <&wf_2g_5g_pins>;
+ pinctrl-1 = <&wf_dbdc_pins>;
+};
+
+&pio {
+ wf_2g_5g_pins: wf-2g-5g-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_2g", "wf_5g";
+ };
+ conf {
+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+ "WF1_TOP_CLK", "WF1_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
+
+ wf_dbdc_pins: wf-dbdc-pins {
+ mux {
+ function = "wifi";
+ groups = "wf_dbdc";
+ };
+ conf {
+ pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
+ "WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
+ "WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
+ "WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
+ "WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
+ "WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
+ "WF1_TOP_CLK", "WF1_TOP_DATA";
+ drive-strength = <4>;
+ };
+ };
+};
--
2.36.1
next reply other threads:[~2022-06-30 9:49 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-30 9:49 Peter Chiu [this message]
2022-08-30 8:43 ` [PATCH v4] arm64: dts: mt7986: add built-in Wi-Fi device nodes Matthias Brugger
2022-09-01 3:47 ` Peter Chiu
2022-09-01 8:13 ` Matthias Brugger
2022-09-01 11:03 ` Peter Chiu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220630094909.8014-1-chui-hao.chiu@mediatek.com \
--to=chui-hao.chiu@mediatek.com \
--cc=devicetree@vger.kernel.org \
--cc=evelyn.tsai@mediatek.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mediatek@lists.infradead.org \
--cc=matthias.bgg@gmail.com \
--cc=robh+dt@kernel.org \
--cc=ryder.Lee@mediatek.com \
--cc=sam.shih@mediatek.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).