From: Stefan Berger <stefanb@linux.ibm.com>
To: kexec@lists.infradead.org, devicetree@vger.kernel.org,
linux-integrity@vger.kernel.org, linux-kernel@vger.kernel.org,
linuxppc-dev@lists.ozlabs.org
Cc: nayna@linux.ibm.com, nasastry@in.ibm.com, mpe@ellerman.id.au,
Stefan Berger <stefanb@linux.ibm.com>,
Jarkko Sakkinen <jarkko@kernel.org>,
Jason Gunthorpe <jgg@ziepe.ca>, Rob Herring <robh+dt@kernel.org>,
Frank Rowand <frowand.list@gmail.com>
Subject: [PATCH v4 3/5] tpm: of: Make of-tree specific function commonly available
Date: Thu, 30 Jun 2022 22:26:01 -0400 [thread overview]
Message-ID: <20220701022603.31076-4-stefanb@linux.ibm.com> (raw)
In-Reply-To: <20220701022603.31076-1-stefanb@linux.ibm.com>
Simplify tpm_read_log_of() by moving reusable parts of the code into
an inline function that makes it commonly available so it can be
used also for kexec support. Call the new of_tpm_get_sml_parameters()
function from the TPM Open Firmware driver.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Cc: Jarkko Sakkinen <jarkko@kernel.org>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
---
v4:
- converted to inline function
---
drivers/char/tpm/eventlog/of.c | 31 +++++--------------------------
include/linux/tpm.h | 27 +++++++++++++++++++++++++++
2 files changed, 32 insertions(+), 26 deletions(-)
diff --git a/drivers/char/tpm/eventlog/of.c b/drivers/char/tpm/eventlog/of.c
index a9ce66d09a75..f9462d19632e 100644
--- a/drivers/char/tpm/eventlog/of.c
+++ b/drivers/char/tpm/eventlog/of.c
@@ -12,6 +12,7 @@
#include <linux/slab.h>
#include <linux/of.h>
+#include <linux/tpm.h>
#include <linux/tpm_eventlog.h>
#include "../tpm.h"
@@ -20,11 +21,10 @@
int tpm_read_log_of(struct tpm_chip *chip)
{
struct device_node *np;
- const u32 *sizep;
- const u64 *basep;
struct tpm_bios_log *log;
u32 size;
u64 base;
+ int ret;
log = &chip->log;
if (chip->dev.parent && chip->dev.parent->of_node)
@@ -35,30 +35,9 @@ int tpm_read_log_of(struct tpm_chip *chip)
if (of_property_read_bool(np, "powered-while-suspended"))
chip->flags |= TPM_CHIP_FLAG_ALWAYS_POWERED;
- sizep = of_get_property(np, "linux,sml-size", NULL);
- basep = of_get_property(np, "linux,sml-base", NULL);
- if (sizep == NULL && basep == NULL)
- return -ENODEV;
- if (sizep == NULL || basep == NULL)
- return -EIO;
-
- /*
- * For both vtpm/tpm, firmware has log addr and log size in big
- * endian format. But in case of vtpm, there is a method called
- * sml-handover which is run during kernel init even before
- * device tree is setup. This sml-handover function takes care
- * of endianness and writes to sml-base and sml-size in little
- * endian format. For this reason, vtpm doesn't need conversion
- * but physical tpm needs the conversion.
- */
- if (of_property_match_string(np, "compatible", "IBM,vtpm") < 0 &&
- of_property_match_string(np, "compatible", "IBM,vtpm20") < 0) {
- size = be32_to_cpup((__force __be32 *)sizep);
- base = be64_to_cpup((__force __be64 *)basep);
- } else {
- size = *sizep;
- base = *basep;
- }
+ ret = of_tpm_get_sml_parameters(np, &base, &size);
+ if (ret < 0)
+ return ret;
if (size == 0) {
dev_warn(&chip->dev, "%s: Event log area empty\n", __func__);
diff --git a/include/linux/tpm.h b/include/linux/tpm.h
index dfeb25a0362d..b3dff255bc58 100644
--- a/include/linux/tpm.h
+++ b/include/linux/tpm.h
@@ -460,4 +460,31 @@ static inline struct tpm_chip *tpm_default_chip(void)
return NULL;
}
#endif
+
+#ifdef CONFIG_OF
+static inline int of_tpm_get_sml_parameters(struct device_node *np,
+ u64 *base, u32 *size)
+{
+ const u32 *sizep;
+ const u64 *basep;
+
+ sizep = of_get_property(np, "linux,sml-size", NULL);
+ basep = of_get_property(np, "linux,sml-base", NULL);
+ if (sizep == NULL && basep == NULL)
+ return -ENODEV;
+ if (sizep == NULL || basep == NULL)
+ return -EIO;
+
+ if (of_property_match_string(np, "compatible", "IBM,vtpm") < 0 &&
+ of_property_match_string(np, "compatible", "IBM,vtpm20") < 0) {
+ *size = be32_to_cpup((__force __be32 *)sizep);
+ *base = be64_to_cpup((__force __be64 *)basep);
+ } else {
+ *size = *sizep;
+ *base = *basep;
+ }
+ return 0;
+}
+#endif
+
#endif
--
2.35.1
next prev parent reply other threads:[~2022-07-01 2:26 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-01 2:25 [PATCH v4 0/5] tpm: Preserve TPM measurement log across kexec (ppc64) Stefan Berger
2022-07-01 2:25 ` [PATCH v4 1/5] of: check previous kernel's ima-kexec-buffer against memory bounds Stefan Berger
2022-07-01 2:26 ` [PATCH v4 2/5] drivers: of: kexec ima: Support 32-bit platforms Stefan Berger
2022-07-01 2:26 ` Stefan Berger [this message]
2022-07-11 0:01 ` [PATCH v4 3/5] tpm: of: Make of-tree specific function commonly available Jarkko Sakkinen
2022-07-01 2:26 ` [PATCH v4 4/5] of: kexec: Refactor IMA buffer related functions to make them reusable Stefan Berger
2022-07-05 22:46 ` Mimi Zohar
2022-07-06 14:00 ` Jonathan McDowell
2022-07-06 15:06 ` Stefan Berger
2022-07-01 2:26 ` [PATCH v4 5/5] tpm/kexec: Duplicate TPM measurement log in of-tree for kexec Stefan Berger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220701022603.31076-4-stefanb@linux.ibm.com \
--to=stefanb@linux.ibm.com \
--cc=devicetree@vger.kernel.org \
--cc=frowand.list@gmail.com \
--cc=jarkko@kernel.org \
--cc=jgg@ziepe.ca \
--cc=kexec@lists.infradead.org \
--cc=linux-integrity@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linuxppc-dev@lists.ozlabs.org \
--cc=mpe@ellerman.id.au \
--cc=nasastry@in.ibm.com \
--cc=nayna@linux.ibm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).