[PATCH v3 3/3] arm64: dts: qcom: msm8996: add #clock-cells and XO clock to the HDMI PHY node

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

Add #clock-cells property to the HDMI PHY device node to let other nodes
resolve the hdmipll clock. While we are at it, also add the XO clock to
the device node.

Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8996.dtsi | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 25d6b26fab60..b72385ffecc6 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1049,9 +1049,13 @@ hdmi_phy: hdmi-phy@9a0600 {
 					    "hdmi_phy";
 
 				clocks = <&mmcc MDSS_AHB_CLK>,
-					 <&gcc GCC_HDMI_CLKREF_CLK>;
+					 <&gcc GCC_HDMI_CLKREF_CLK>,
+					 <&xo_board>;
 				clock-names = "iface",
-					      "ref";
+					      "ref",
+					      "xo";
+
+				#clock-cells = <0>;
 
 				status = "disabled";
 			};
-- 
2.35.1