From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Jingoo Han <jingoohan1@gmail.com>,
Gustavo Pimentel <gustavo.pimentel@synopsys.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Stanimir Varbanov <svarbanov@mm-sol.com>,
Vinod Koul <vkoul@kernel.org>,
linux-arm-msm@vger.kernel.org, linux-pci@vger.kernel.org,
devicetree@vger.kernel.org, Johan Hovold <johan@kernel.org>,
Rob Herring <robh@kernel.org>,
Johan Hovold <johan+linaro@kernel.org>
Subject: Re: [PATCH v16 3/6] PCI: dwc: split MSI IRQ parsing/allocation to a separate function
Date: Mon, 4 Jul 2022 22:11:18 +0530 [thread overview]
Message-ID: <20220704164118.GG6560@thinkpad> (raw)
In-Reply-To: <20220704152746.807550-4-dmitry.baryshkov@linaro.org>
On Mon, Jul 04, 2022 at 06:27:43PM +0300, Dmitry Baryshkov wrote:
> Split handling of MSI host IRQs to a separate dw_pcie_msi_host_init()
> function. The code is complex enough to warrant a separate function.
>
> Reviewed-by: Rob Herring <robh@kernel.org>
> Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Thanks,
Mani
> ---
> .../pci/controller/dwc/pcie-designware-host.c | 101 ++++++++++--------
> 1 file changed, 57 insertions(+), 44 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 4c5b3f70ab17..3ba531da99d4 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -290,6 +290,61 @@ static void dw_pcie_msi_init(struct pcie_port *pp)
> dw_pcie_writel_dbi(pci, PCIE_MSI_ADDR_HI, upper_32_bits(msi_target));
> }
>
> +static int dw_pcie_msi_host_init(struct pcie_port *pp)
> +{
> + struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> + struct device *dev = pci->dev;
> + struct platform_device *pdev = to_platform_device(dev);
> + int ret;
> + u32 ctrl, num_ctrls;
> +
> + num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
> + for (ctrl = 0; ctrl < num_ctrls; ctrl++)
> + pp->irq_mask[ctrl] = ~0;
> +
> + if (!pp->msi_irq[0]) {
> + int irq = platform_get_irq_byname_optional(pdev, "msi");
> +
> + if (irq < 0) {
> + irq = platform_get_irq(pdev, 0);
> + if (irq < 0)
> + return irq;
> + }
> + pp->msi_irq[0] = irq;
> + }
> +
> + pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
> +
> + ret = dw_pcie_allocate_domains(pp);
> + if (ret)
> + return ret;
> +
> + for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
> + if (pp->msi_irq[ctrl] > 0)
> + irq_set_chained_handler_and_data(pp->msi_irq[ctrl],
> + dw_chained_msi_isr,
> + pp);
> + }
> +
> + ret = dma_set_mask(pci->dev, DMA_BIT_MASK(32));
> + if (ret)
> + dev_warn(pci->dev, "Failed to set DMA mask to 32-bit. Devices with only 32-bit MSI support may not work properly\n");
> +
> + pp->msi_page = alloc_page(GFP_DMA32);
> + pp->msi_data = dma_map_page(pci->dev, pp->msi_page, 0,
> + PAGE_SIZE, DMA_FROM_DEVICE);
> + ret = dma_mapping_error(pci->dev, pp->msi_data);
> + if (ret) {
> + dev_err(pci->dev, "Failed to map MSI data\n");
> + pp->msi_page = NULL;
> + pp->msi_data = 0;
> + dw_pcie_free_msi(pp);
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> int dw_pcie_host_init(struct pcie_port *pp)
> {
> struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> @@ -367,51 +422,9 @@ int dw_pcie_host_init(struct pcie_port *pp)
> if (ret < 0)
> return ret;
> } else if (pp->has_msi_ctrl) {
> - u32 ctrl, num_ctrls;
> -
> - num_ctrls = pp->num_vectors / MAX_MSI_IRQS_PER_CTRL;
> - for (ctrl = 0; ctrl < num_ctrls; ctrl++)
> - pp->irq_mask[ctrl] = ~0;
> -
> - if (!pp->msi_irq[0]) {
> - int irq = platform_get_irq_byname_optional(pdev, "msi");
> -
> - if (irq < 0) {
> - irq = platform_get_irq(pdev, 0);
> - if (irq < 0)
> - return irq;
> - }
> - pp->msi_irq[0] = irq;
> - }
> -
> - pp->msi_irq_chip = &dw_pci_msi_bottom_irq_chip;
> -
> - ret = dw_pcie_allocate_domains(pp);
> - if (ret)
> + ret = dw_pcie_msi_host_init(pp);
> + if (ret < 0)
> return ret;
> -
> - for (ctrl = 0; ctrl < num_ctrls; ctrl++) {
> - if (pp->msi_irq[ctrl] > 0)
> - irq_set_chained_handler_and_data(pp->msi_irq[ctrl],
> - dw_chained_msi_isr,
> - pp);
> - }
> -
> - ret = dma_set_mask(pci->dev, DMA_BIT_MASK(32));
> - if (ret)
> - dev_warn(pci->dev, "Failed to set DMA mask to 32-bit. Devices with only 32-bit MSI support may not work properly\n");
> -
> - pp->msi_page = alloc_page(GFP_DMA32);
> - pp->msi_data = dma_map_page(pci->dev, pp->msi_page, 0,
> - PAGE_SIZE, DMA_FROM_DEVICE);
> - ret = dma_mapping_error(pci->dev, pp->msi_data);
> - if (ret) {
> - dev_err(pci->dev, "Failed to map MSI data\n");
> - __free_page(pp->msi_page);
> - pp->msi_page = NULL;
> - pp->msi_data = 0;
> - goto err_free_msi;
> - }
> }
> }
>
> --
> 2.35.1
>
--
மணிவண்ணன் சதாசிவம்
next prev parent reply other threads:[~2022-07-04 16:43 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-04 15:27 [PATCH v16 0/6] PCI: dwc: Fix higher MSI vectors handling Dmitry Baryshkov
2022-07-04 15:27 ` [PATCH v16 1/6] PCI: dwc: Correct msi_irq condition in dw_pcie_free_msi() Dmitry Baryshkov
2022-07-04 16:38 ` Manivannan Sadhasivam
2022-07-04 15:27 ` [PATCH v16 2/6] PCI: dwc: Convert msi_irq to the array Dmitry Baryshkov
2022-07-04 16:39 ` Manivannan Sadhasivam
2022-07-04 15:27 ` [PATCH v16 3/6] PCI: dwc: split MSI IRQ parsing/allocation to a separate function Dmitry Baryshkov
2022-07-04 16:41 ` Manivannan Sadhasivam [this message]
2022-07-04 15:27 ` [PATCH v16 4/6] PCI: dwc: Handle MSIs routed to multiple GIC interrupts Dmitry Baryshkov
2022-07-04 16:44 ` Manivannan Sadhasivam
2022-07-04 15:27 ` [PATCH v16 5/6] dt-bindings: PCI: qcom: Support additional MSI interrupts Dmitry Baryshkov
2022-07-07 8:06 ` Johan Hovold
2022-07-07 13:48 ` Dmitry Baryshkov
2022-07-04 15:27 ` [PATCH v16 6/6] arm64: dts: qcom: sm8250: provide " Dmitry Baryshkov
2022-07-04 16:46 ` Manivannan Sadhasivam
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220704164118.GG6560@thinkpad \
--to=manivannan.sadhasivam@linaro.org \
--cc=agross@kernel.org \
--cc=bhelgaas@google.com \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.baryshkov@linaro.org \
--cc=gustavo.pimentel@synopsys.com \
--cc=jingoohan1@gmail.com \
--cc=johan+linaro@kernel.org \
--cc=johan@kernel.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=robh+dt@kernel.org \
--cc=robh@kernel.org \
--cc=svarbanov@mm-sol.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).