[PATCH v4 7/7] arm64: dts: qcom: msm8916: add clocks to the GCC device node

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

As we are converting this platform to use DT clock bindings, add clocks
and clock-names properties to the MMCC device tree node.

Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 14 ++++++++++++++
 1 file changed, 14 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 48bc2e09128d..de741f287e1d 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -936,6 +936,20 @@ gcc: clock-controller@1800000 {
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
 			reg = <0x01800000 0x80000>;
+			clocks = <&xo_board>,
+				 <&sleep_clk>,
+				 <&dsi_phy0 1>,
+				 <&dsi_phy0 0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "xo",
+				      "sleep_clk",
+				      "dsi0pll",
+				      "dsi0pllbyte",
+				      "ext_mclk",
+				      "ext_pri_i2s",
+				      "ext_sec_i2s";
 		};
 
 		tcsr_mutex: hwlock@1905000 {
-- 
2.35.1