devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Conor Dooley <conor.dooley@microchip.com>
To: "David S . Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Claudiu Beznea <claudiu.beznea@microchip.com>
Cc: <netdev@vger.kernel.org>, <devicetree@vger.kernel.org>,
	<linux-riscv@lists.infradead.org>, <linux-kernel@vger.kernel.org>,
	"Conor Dooley" <conor.dooley@microchip.com>
Subject: [net-next PATCH v3 2/5] net: macb: add polarfire soc reset support
Date: Wed, 6 Jul 2022 10:51:26 +0100	[thread overview]
Message-ID: <20220706095129.828253-3-conor.dooley@microchip.com> (raw)
In-Reply-To: <20220706095129.828253-1-conor.dooley@microchip.com>

To date, the Microchip PolarFire SoC (MPFS) has been using the
cdns,macb compatible, however the generic device does not have reset
support. Add a new compatible & .data for MPFS to hook into the reset
functionality added for zynqmp support (and make the zynqmp init
function generic in the process).

Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
---
 drivers/net/ethernet/cadence/macb_main.c | 26 ++++++++++++++++--------
 1 file changed, 18 insertions(+), 8 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index d89098f4ede8..d43bcf256b02 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -4689,34 +4689,32 @@ static const struct macb_config np4_config = {
 	.usrio = &macb_default_usrio,
 };
 
-static int zynqmp_init(struct platform_device *pdev)
+static int init_reset_optional(struct platform_device *pdev)
 {
 	struct net_device *dev = platform_get_drvdata(pdev);
 	struct macb *bp = netdev_priv(dev);
 	int ret;
 
 	if (bp->phy_interface == PHY_INTERFACE_MODE_SGMII) {
-		/* Ensure PS-GTR PHY device used in SGMII mode is ready */
+		/* Ensure PHY device used in SGMII mode is ready */
 		bp->sgmii_phy = devm_phy_optional_get(&pdev->dev, NULL);
 
 		if (IS_ERR(bp->sgmii_phy)) {
 			ret = PTR_ERR(bp->sgmii_phy);
 			dev_err_probe(&pdev->dev, ret,
-				      "failed to get PS-GTR PHY\n");
+				      "failed to get SGMII PHY\n");
 			return ret;
 		}
 
 		ret = phy_init(bp->sgmii_phy);
 		if (ret) {
-			dev_err(&pdev->dev, "failed to init PS-GTR PHY: %d\n",
+			dev_err(&pdev->dev, "failed to init SGMII PHY: %d\n",
 				ret);
 			return ret;
 		}
 	}
 
-	/* Fully reset GEM controller at hardware level using zynqmp-reset driver,
-	 * if mapped in device tree.
-	 */
+	/* Fully reset controller at hardware level if mapped in device tree */
 	ret = device_reset_optional(&pdev->dev);
 	if (ret) {
 		dev_err_probe(&pdev->dev, ret, "failed to reset controller");
@@ -4737,7 +4735,7 @@ static const struct macb_config zynqmp_config = {
 			MACB_CAPS_GEM_HAS_PTP | MACB_CAPS_BD_RD_PREFETCH,
 	.dma_burst_length = 16,
 	.clk_init = macb_clk_init,
-	.init = zynqmp_init,
+	.init = init_reset_optional,
 	.jumbo_max_len = 10240,
 	.usrio = &macb_default_usrio,
 };
@@ -4751,6 +4749,17 @@ static const struct macb_config zynq_config = {
 	.usrio = &macb_default_usrio,
 };
 
+static const struct macb_config mpfs_config = {
+	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE |
+		MACB_CAPS_JUMBO |
+		MACB_CAPS_GEM_HAS_PTP,
+	.dma_burst_length = 16,
+	.clk_init = macb_clk_init,
+	.init = init_reset_optional,
+	.usrio = &macb_default_usrio,
+	.jumbo_max_len = 10240,
+};
+
 static const struct macb_config sama7g5_gem_config = {
 	.caps = MACB_CAPS_GIGABIT_MODE_AVAILABLE | MACB_CAPS_CLK_HW_CHG |
 		MACB_CAPS_MIIONRGMII,
@@ -4787,6 +4796,7 @@ static const struct of_device_id macb_dt_ids[] = {
 	{ .compatible = "cdns,zynqmp-gem", .data = &zynqmp_config},
 	{ .compatible = "cdns,zynq-gem", .data = &zynq_config },
 	{ .compatible = "sifive,fu540-c000-gem", .data = &fu540_c000_config },
+	{ .compatible = "microchip,mpfs-macb", .data = &mpfs_config },
 	{ .compatible = "microchip,sama7g5-gem", .data = &sama7g5_gem_config },
 	{ .compatible = "microchip,sama7g5-emac", .data = &sama7g5_emac_config },
 	{ /* sentinel */ }
-- 
2.36.1


  parent reply	other threads:[~2022-07-06  9:52 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-06  9:51 [net-next PATCH v3 0/5] PolarFire SoC macb reset support Conor Dooley
2022-07-06  9:51 ` [net-next PATCH v3 1/5] dt-bindings: net: cdns,macb: document polarfire soc's macb Conor Dooley
2022-07-06  9:51 ` Conor Dooley [this message]
2022-07-06  9:51 ` [net-next PATCH v3 3/5] net: macb: unify macb_config alignment style Conor Dooley
2022-07-06  9:51 ` [net-next PATCH v3 4/5] net: macb: simplify error paths in init_reset_optional() Conor Dooley
2022-07-06  9:51 ` [net-next PATCH v3 5/5] net: macb: sort init_reset_optional() with other init()s Conor Dooley
2022-07-08  3:10 ` [net-next PATCH v3 0/5] PolarFire SoC macb reset support patchwork-bot+netdevbpf

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220706095129.828253-3-conor.dooley@microchip.com \
    --to=conor.dooley@microchip.com \
    --cc=claudiu.beznea@microchip.com \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=netdev@vger.kernel.org \
    --cc=nicolas.ferre@microchip.com \
    --cc=pabeni@redhat.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).