[PATCH v8 0/5] SM8350 Display/GPU clock enablement

[PATCH v8 0/5] SM8350 Display/GPU clock enablement

[Robert Foss]

Changes since v2
 - Dropped "clk: Introduce CLK_ASSUME_ENABLED_WHEN_UNUSED"
 - Dropped "clk: qcom: sm8250-dispcc: Flag shared RCGs as assumed enable"
 - Dropped "clk: qcom: rcg2: Cache rate changes for parked RCGs"

Changes since v3:
 - Dropped RBs & SoBs for bigger changes
 - Changed author to me for patches with big changes

Changes since v5:
 - Reverted dispcc-sm8350 split from dispcc-sm8250
   and related .index changes - Bjorn
 - Re-added Tags that were thrown out due to the 
   above revert

Changes since v7
 - Added Vinods RBs
 - Re-ordered patches to make bindings come before 
 - Removed rpmdpd patch from series



Jonathan Marek (2):
  dt-bindings: clock: Add Qcom SM8350 DISPCC bindings
  clk: qcom: add support for SM8350 DISPCC

Robert Foss (3):
  dt-bindings: clock: Add Qcom SM8350 GPUCC bindings
  clk: qcom: add support for SM8350 GPUCC
  arm64: dts: qcom: sm8350: Add DISPCC node

 .../bindings/clock/qcom,dispcc-sm8x50.yaml    |   6 +-
 .../bindings/clock/qcom,gpucc-sm8350.yaml     |  72 ++
 arch/arm64/boot/dts/qcom/sm8350.dtsi          |  26 +
 drivers/clk/qcom/Kconfig                      |  14 +-
 drivers/clk/qcom/Makefile                     |   1 +
 drivers/clk/qcom/dispcc-sm8250.c              |  63 +-
 drivers/clk/qcom/gpucc-sm8350.c               | 637 ++++++++++++++++++
 .../dt-bindings/clock/qcom,dispcc-sm8350.h    |   1 +
 include/dt-bindings/clock/qcom,gpucc-sm8350.h |  52 ++
 9 files changed, 866 insertions(+), 6 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
 create mode 100644 drivers/clk/qcom/gpucc-sm8350.c
 create mode 120000 include/dt-bindings/clock/qcom,dispcc-sm8350.h
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8350.h

-- 
2.34.1

[PATCH v8 1/5] dt-bindings: clock: Add Qcom SM8350 GPUCC bindings

[Robert Foss]

Add device tree bindings for graphics clock controller for
Qualcomm Technology Inc's SM8350 SoCs.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmityr.baryshkov@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Changes since v3
 - Separate from qcom,gpucc
 - Remove clock-names
 - Make example sm8350 based
 - Changed author to me due to size of changes

Changes since v5
 - Add Ack - Rob

Changes since v5
 - Reverted split from dispcc-sm8250
 - Re-added tags from v3



 .../bindings/clock/qcom,gpucc-sm8350.yaml     | 72 +++++++++++++++++++
 include/dt-bindings/clock/qcom,gpucc-sm8350.h | 52 ++++++++++++++
 2 files changed, 124 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
 create mode 100644 include/dt-bindings/clock/qcom,gpucc-sm8350.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
new file mode 100644
index 000000000000..0a0546c079a9
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/qcom,gpucc-sm8350.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/qcom,gpucc-sm8350.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Graphics Clock & Reset Controller Binding
+
+maintainers:
+  - Robert Foss <robert.foss@linaro.org>
+
+description: |
+  Qualcomm graphics clock control module which supports the clocks, resets and
+  power domains on Qualcomm SoCs.
+
+  See also:
+    dt-bindings/clock/qcom,gpucc-sm8350.h
+
+properties:
+  compatible:
+    enum:
+      - qcom,sm8350-gpucc
+
+  clocks:
+    items:
+      - description: Board XO source
+      - description: GPLL0 main branch source
+      - description: GPLL0 div branch source
+
+  '#clock-cells':
+    const: 1
+
+  '#reset-cells':
+    const: 1
+
+  '#power-domain-cells':
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - '#clock-cells'
+  - '#reset-cells'
+  - '#power-domain-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-sm8350.h>
+    #include <dt-bindings/clock/qcom,rpmh.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        clock-controller@3d90000 {
+            compatible = "qcom,sm8350-gpucc";
+            reg = <0 0x03d90000 0 0x9000>;
+            clocks = <&rpmhcc RPMH_CXO_CLK>,
+                     <&gcc GCC_GPU_GPLL0_CLK_SRC>,
+                     <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+            #clock-cells = <1>;
+            #reset-cells = <1>;
+            #power-domain-cells = <1>;
+        };
+    };
+...
diff --git a/include/dt-bindings/clock/qcom,gpucc-sm8350.h b/include/dt-bindings/clock/qcom,gpucc-sm8350.h
new file mode 100644
index 000000000000..2ca857f5bfd2
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,gpucc-sm8350.h
@@ -0,0 +1,52 @@
+/* SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) */
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#ifndef _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8350_H
+#define _DT_BINDINGS_CLK_QCOM_GPU_CC_SM8350_H
+
+/* GPU_CC clocks */
+#define GPU_CC_AHB_CLK			0
+#define GPU_CC_CB_CLK			1
+#define GPU_CC_CRC_AHB_CLK		2
+#define GPU_CC_CX_APB_CLK		3
+#define GPU_CC_CX_GMU_CLK		4
+#define GPU_CC_CX_QDSS_AT_CLK		5
+#define GPU_CC_CX_QDSS_TRIG_CLK		6
+#define GPU_CC_CX_QDSS_TSCTR_CLK	7
+#define GPU_CC_CX_SNOC_DVM_CLK		8
+#define GPU_CC_CXO_AON_CLK		9
+#define GPU_CC_CXO_CLK			10
+#define GPU_CC_FREQ_MEASURE_CLK		11
+#define GPU_CC_GMU_CLK_SRC		12
+#define GPU_CC_GX_GMU_CLK		13
+#define GPU_CC_GX_QDSS_TSCTR_CLK	14
+#define GPU_CC_GX_VSENSE_CLK		15
+#define GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK	16
+#define GPU_CC_HUB_AHB_DIV_CLK_SRC	17
+#define GPU_CC_HUB_AON_CLK		18
+#define GPU_CC_HUB_CLK_SRC		19
+#define GPU_CC_HUB_CX_INT_CLK		20
+#define GPU_CC_HUB_CX_INT_DIV_CLK_SRC	21
+#define GPU_CC_MND1X_0_GFX3D_CLK	22
+#define GPU_CC_MND1X_1_GFX3D_CLK	23
+#define GPU_CC_PLL0			24
+#define GPU_CC_PLL1			25
+#define GPU_CC_SLEEP_CLK		26
+
+/* GPU_CC resets */
+#define GPUCC_GPU_CC_ACD_BCR		0
+#define GPUCC_GPU_CC_CB_BCR		1
+#define GPUCC_GPU_CC_CX_BCR		2
+#define GPUCC_GPU_CC_FAST_HUB_BCR	3
+#define GPUCC_GPU_CC_GFX3D_AON_BCR	4
+#define GPUCC_GPU_CC_GMU_BCR		5
+#define GPUCC_GPU_CC_GX_BCR		6
+#define GPUCC_GPU_CC_XO_BCR		7
+
+/* GPU_CC GDSCRs */
+#define GPU_CX_GDSC			0
+#define GPU_GX_GDSC			1
+
+#endif
-- 
2.34.1

[PATCH v8 2/5] clk: qcom: add support for SM8350 GPUCC

[Robert Foss]

The GPUCC manages the clocks for the Adreno GPU found on the
sm8350 SoCs.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---

Changes since v1
 - Remove .name assignments for clk_parent_data - Dmitry
 - Use ARRAY_SIZE where possible - Dmitry
 - Remove commented out code - Dmitry
 - Set CLAMP_IO flag for gpu_gx_gdsc - Dmitry
 - Assign .parent_hws instead of .hw - Dmitry

Changes since v2
 - Switch license to dual BSD/GPL - Bjorn
 - Add Jonathans SoB - Jonathan
 - Add Linaro to copyright statement - Bjorn
 - Make .hw.init assignment const - Bjorn
 - Extract & deduplicate bi_tcxo parent_data - Bjorn
 - Removed further .name assignment - Bjorn
 - Move of_device_id declaration - Bjorn

Changes since v3
 - Change license to BSD/GPL - Rob/Bjorn
 - Switch from .fw_name to .index

Changes since v4
 - Change year of copyright statement
 - Change to dual license for header file - Rob

Changes since v5
 - Change hex to lower case - Konrad

Changes since v6
 - Change hex to lower case - Konrad
 - Change license go GPL 2.0 only - Konrad


 drivers/clk/qcom/Kconfig        |   8 +
 drivers/clk/qcom/Makefile       |   1 +
 drivers/clk/qcom/gpucc-sm8350.c | 637 ++++++++++++++++++++++++++++++++
 3 files changed, 646 insertions(+)
 create mode 100644 drivers/clk/qcom/gpucc-sm8350.c

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index fc45d00eec42..4c5bae4fb38d 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -713,6 +713,14 @@ config SM_GPUCC_8250
 	  Say Y if you want to support graphics controller devices and
 	  functionality such as 3D graphics.
 
+config SM_GPUCC_8350
+	tristate "SM8350 Graphics Clock Controller"
+	select SM_GCC_8350
+	help
+	  Support for the graphics clock controller on SM8350 devices.
+	  Say Y if you want to support graphics controller devices and
+	  functionality such as 3D graphics.
+
 config SM_VIDEOCC_8150
 	tristate "SM8150 Video Clock Controller"
 	select SM_GCC_8150
diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
index 08594230c1c1..871c21d1a342 100644
--- a/drivers/clk/qcom/Makefile
+++ b/drivers/clk/qcom/Makefile
@@ -102,6 +102,7 @@ obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o
 obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o
 obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o
 obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o
+obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
 obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o
 obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o
 obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o
diff --git a/drivers/clk/qcom/gpucc-sm8350.c b/drivers/clk/qcom/gpucc-sm8350.c
new file mode 100644
index 000000000000..d13fa813d190
--- /dev/null
+++ b/drivers/clk/qcom/gpucc-sm8350.c
@@ -0,0 +1,637 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022, Linaro Limited
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/clock/qcom,gpucc-sm8350.h>
+
+#include "clk-alpha-pll.h"
+#include "clk-branch.h"
+#include "clk-pll.h"
+#include "clk-rcg.h"
+#include "clk-regmap.h"
+#include "common.h"
+#include "clk-regmap-mux.h"
+#include "clk-regmap-divider.h"
+#include "gdsc.h"
+#include "reset.h"
+
+enum {
+	P_BI_TCXO,
+	P_GPLL0_OUT_MAIN,
+	P_GPLL0_OUT_MAIN_DIV,
+	P_GPU_CC_PLL0_OUT_MAIN,
+	P_GPU_CC_PLL1_OUT_MAIN,
+};
+
+static struct pll_vco lucid_5lpe_vco[] = {
+	{ 249600000, 1750000000, 0 },
+};
+
+static const struct alpha_pll_config gpu_cc_pll0_config = {
+	.l = 0x18,
+	.alpha = 0x6000,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00002261,
+	.config_ctl_hi1_val = 0x2a9a699c,
+	.test_ctl_val = 0x00000000,
+	.test_ctl_hi_val = 0x00000000,
+	.test_ctl_hi1_val = 0x01800000,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000805,
+	.user_ctl_hi1_val = 0x00000000,
+};
+
+static const struct clk_parent_data gpu_cc_parent = {
+	.fw_name = "bi_tcxo",
+};
+
+static struct clk_alpha_pll gpu_cc_pll0 = {
+	.offset = 0x0,
+	.vco_table = lucid_5lpe_vco,
+	.num_vco = ARRAY_SIZE(lucid_5lpe_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.hw.init = &(const struct clk_init_data){
+			.name = "gpu_cc_pll0",
+			.parent_data = &gpu_cc_parent,
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_lucid_5lpe_ops,
+		},
+	},
+};
+
+static const struct alpha_pll_config gpu_cc_pll1_config = {
+	.l = 0x1a,
+	.alpha = 0xaaa,
+	.config_ctl_val = 0x20485699,
+	.config_ctl_hi_val = 0x00002261,
+	.config_ctl_hi1_val = 0x2a9a699c,
+	.test_ctl_val = 0x00000000,
+	.test_ctl_hi_val = 0x00000000,
+	.test_ctl_hi1_val = 0x01800000,
+	.user_ctl_val = 0x00000000,
+	.user_ctl_hi_val = 0x00000805,
+	.user_ctl_hi1_val = 0x00000000,
+};
+
+static struct clk_alpha_pll gpu_cc_pll1 = {
+	.offset = 0x100,
+	.vco_table = lucid_5lpe_vco,
+	.num_vco = ARRAY_SIZE(lucid_5lpe_vco),
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_LUCID],
+	.clkr = {
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_pll1",
+			.parent_data = &gpu_cc_parent,
+			.num_parents = 1,
+			.ops = &clk_alpha_pll_lucid_5lpe_ops,
+		},
+	},
+};
+
+static const struct parent_map gpu_cc_parent_map_0[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPU_CC_PLL0_OUT_MAIN, 1 },
+	{ P_GPU_CC_PLL1_OUT_MAIN, 3 },
+	{ P_GPLL0_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_MAIN_DIV, 6 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_0[] = {
+	gpu_cc_parent,
+	{ .hw = &gpu_cc_pll0.clkr.hw },
+	{ .hw = &gpu_cc_pll1.clkr.hw },
+	{ .fw_name = "gcc_gpu_gpll0_clk_src" },
+	{ .fw_name = "gcc_gpu_gpll0_div_clk_src" },
+};
+
+static const struct parent_map gpu_cc_parent_map_1[] = {
+	{ P_BI_TCXO, 0 },
+	{ P_GPU_CC_PLL1_OUT_MAIN, 3 },
+	{ P_GPLL0_OUT_MAIN, 5 },
+	{ P_GPLL0_OUT_MAIN_DIV, 6 },
+};
+
+static const struct clk_parent_data gpu_cc_parent_data_1[] = {
+	gpu_cc_parent,
+	{ .hw = &gpu_cc_pll1.clkr.hw },
+	{ .fw_name = "gcc_gpu_gpll0_clk_src" },
+	{ .fw_name = "gcc_gpu_gpll0_div_clk_src" },
+};
+
+static const struct freq_tbl ftbl_gpu_cc_gmu_clk_src[] = {
+	F(19200000, P_BI_TCXO, 1, 0, 0),
+	F(200000000, P_GPLL0_OUT_MAIN_DIV, 1.5, 0, 0),
+	F(500000000, P_GPU_CC_PLL1_OUT_MAIN, 1, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gpu_cc_gmu_clk_src = {
+	.cmd_rcgr = 0x1120,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gpu_cc_parent_map_0,
+	.freq_tbl = ftbl_gpu_cc_gmu_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_gmu_clk_src",
+		.parent_data = gpu_cc_parent_data_0,
+		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_0),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static const struct freq_tbl ftbl_gpu_cc_hub_clk_src[] = {
+	F(150000000, P_GPLL0_OUT_MAIN_DIV, 2, 0, 0),
+	F(240000000, P_GPLL0_OUT_MAIN, 2.5, 0, 0),
+	F(300000000, P_GPLL0_OUT_MAIN, 2, 0, 0),
+	{ }
+};
+
+static struct clk_rcg2 gpu_cc_hub_clk_src = {
+	.cmd_rcgr = 0x117c,
+	.mnd_width = 0,
+	.hid_width = 5,
+	.parent_map = gpu_cc_parent_map_1,
+	.freq_tbl = ftbl_gpu_cc_hub_clk_src,
+	.clkr.hw.init = &(struct clk_init_data){
+		.name = "gpu_cc_hub_clk_src",
+		.parent_data = gpu_cc_parent_data_1,
+		.num_parents = ARRAY_SIZE(gpu_cc_parent_data_1),
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_rcg2_ops,
+	},
+};
+
+static struct clk_regmap_div gpu_cc_hub_ahb_div_clk_src = {
+	.reg = 0x11c0,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gpu_cc_hub_ahb_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]){
+			&gpu_cc_hub_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_regmap_div gpu_cc_hub_cx_int_div_clk_src = {
+	.reg = 0x11bc,
+	.shift = 0,
+	.width = 4,
+	.clkr.hw.init = &(struct clk_init_data) {
+		.name = "gpu_cc_hub_cx_int_div_clk_src",
+		.parent_hws = (const struct clk_hw*[]){
+			&gpu_cc_hub_clk_src.clkr.hw,
+		},
+		.num_parents = 1,
+		.flags = CLK_SET_RATE_PARENT,
+		.ops = &clk_regmap_div_ro_ops,
+	},
+};
+
+static struct clk_branch gpu_cc_ahb_clk = {
+	.halt_reg = 0x1078,
+	.halt_check = BRANCH_HALT_DELAY,
+	.clkr = {
+		.enable_reg = 0x1078,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_ahb_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_hub_ahb_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cb_clk = {
+	.halt_reg = 0x1170,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1170,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_crc_ahb_clk = {
+	.halt_reg = 0x107c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x107c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_crc_ahb_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_hub_ahb_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_apb_clk = {
+	.halt_reg = 0x1088,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1088,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_apb_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_gmu_clk = {
+	.halt_reg = 0x1098,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1098,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_gmu_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_gmu_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_aon_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_qdss_at_clk = {
+	.halt_reg = 0x1080,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1080,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_qdss_at_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_qdss_trig_clk = {
+	.halt_reg = 0x1094,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1094,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_qdss_trig_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_qdss_tsctr_clk = {
+	.halt_reg = 0x1084,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1084,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_qdss_tsctr_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cx_snoc_dvm_clk = {
+	.halt_reg = 0x108c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x108c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cx_snoc_dvm_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cxo_aon_clk = {
+	.halt_reg = 0x1004,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1004,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cxo_aon_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_cxo_clk = {
+	.halt_reg = 0x109c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x109c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_cxo_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_freq_measure_clk = {
+	.halt_reg = 0x120c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x120c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_freq_measure_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_gx_gmu_clk = {
+	.halt_reg = 0x1064,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1064,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_gx_gmu_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_gmu_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_gx_qdss_tsctr_clk = {
+	.halt_reg = 0x105c,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x105c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_gx_qdss_tsctr_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_gx_vsense_clk = {
+	.halt_reg = 0x1058,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1058,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_gx_vsense_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_hlos1_vote_gpu_smmu_clk = {
+	.halt_reg = 0x5000,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x5000,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_hlos1_vote_gpu_smmu_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_hub_aon_clk = {
+	.halt_reg = 0x1178,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1178,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_hub_aon_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_hub_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_aon_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_hub_cx_int_clk = {
+	.halt_reg = 0x1204,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x1204,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_hub_cx_int_clk",
+			.parent_hws = (const struct clk_hw*[]){
+				&gpu_cc_hub_cx_int_div_clk_src.clkr.hw,
+			},
+			.num_parents = 1,
+			.flags = CLK_SET_RATE_PARENT,
+			.ops = &clk_branch2_aon_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_mnd1x_0_gfx3d_clk = {
+	.halt_reg = 0x802c,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x802c,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_mnd1x_0_gfx3d_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_mnd1x_1_gfx3d_clk = {
+	.halt_reg = 0x8030,
+	.halt_check = BRANCH_HALT,
+	.clkr = {
+		.enable_reg = 0x8030,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_mnd1x_1_gfx3d_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct clk_branch gpu_cc_sleep_clk = {
+	.halt_reg = 0x1090,
+	.halt_check = BRANCH_HALT_VOTED,
+	.clkr = {
+		.enable_reg = 0x1090,
+		.enable_mask = BIT(0),
+		.hw.init = &(struct clk_init_data){
+			.name = "gpu_cc_sleep_clk",
+			.ops = &clk_branch2_ops,
+		},
+	},
+};
+
+static struct gdsc gpu_cx_gdsc = {
+	.gdscr = 0x106c,
+	.gds_hw_ctrl = 0x1540,
+	.pd = {
+		.name = "gpu_cx_gdsc",
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = VOTABLE,
+};
+
+static struct gdsc gpu_gx_gdsc = {
+	.gdscr = 0x100c,
+	.clamp_io_ctrl = 0x1508,
+	.pd = {
+		.name = "gpu_gx_gdsc",
+		.power_on = gdsc_gx_do_nothing_enable,
+	},
+	.pwrsts = PWRSTS_OFF_ON,
+	.flags = CLAMP_IO | AON_RESET | POLL_CFG_GDSCR,
+};
+
+static struct clk_regmap *gpu_cc_sm8350_clocks[] = {
+	[GPU_CC_AHB_CLK] = &gpu_cc_ahb_clk.clkr,
+	[GPU_CC_CB_CLK] = &gpu_cc_cb_clk.clkr,
+	[GPU_CC_CRC_AHB_CLK] = &gpu_cc_crc_ahb_clk.clkr,
+	[GPU_CC_CX_APB_CLK] = &gpu_cc_cx_apb_clk.clkr,
+	[GPU_CC_CX_GMU_CLK] = &gpu_cc_cx_gmu_clk.clkr,
+	[GPU_CC_CX_QDSS_AT_CLK] = &gpu_cc_cx_qdss_at_clk.clkr,
+	[GPU_CC_CX_QDSS_TRIG_CLK] = &gpu_cc_cx_qdss_trig_clk.clkr,
+	[GPU_CC_CX_QDSS_TSCTR_CLK] = &gpu_cc_cx_qdss_tsctr_clk.clkr,
+	[GPU_CC_CX_SNOC_DVM_CLK] = &gpu_cc_cx_snoc_dvm_clk.clkr,
+	[GPU_CC_CXO_AON_CLK] = &gpu_cc_cxo_aon_clk.clkr,
+	[GPU_CC_CXO_CLK] = &gpu_cc_cxo_clk.clkr,
+	[GPU_CC_FREQ_MEASURE_CLK] = &gpu_cc_freq_measure_clk.clkr,
+	[GPU_CC_GMU_CLK_SRC] = &gpu_cc_gmu_clk_src.clkr,
+	[GPU_CC_GX_GMU_CLK] = &gpu_cc_gx_gmu_clk.clkr,
+	[GPU_CC_GX_QDSS_TSCTR_CLK] = &gpu_cc_gx_qdss_tsctr_clk.clkr,
+	[GPU_CC_GX_VSENSE_CLK] = &gpu_cc_gx_vsense_clk.clkr,
+	[GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK] = &gpu_cc_hlos1_vote_gpu_smmu_clk.clkr,
+	[GPU_CC_HUB_AHB_DIV_CLK_SRC] = &gpu_cc_hub_ahb_div_clk_src.clkr,
+	[GPU_CC_HUB_AON_CLK] = &gpu_cc_hub_aon_clk.clkr,
+	[GPU_CC_HUB_CLK_SRC] = &gpu_cc_hub_clk_src.clkr,
+	[GPU_CC_HUB_CX_INT_CLK] = &gpu_cc_hub_cx_int_clk.clkr,
+	[GPU_CC_HUB_CX_INT_DIV_CLK_SRC] = &gpu_cc_hub_cx_int_div_clk_src.clkr,
+	[GPU_CC_MND1X_0_GFX3D_CLK] = &gpu_cc_mnd1x_0_gfx3d_clk.clkr,
+	[GPU_CC_MND1X_1_GFX3D_CLK] = &gpu_cc_mnd1x_1_gfx3d_clk.clkr,
+	[GPU_CC_PLL0] = &gpu_cc_pll0.clkr,
+	[GPU_CC_PLL1] = &gpu_cc_pll1.clkr,
+	[GPU_CC_SLEEP_CLK] = &gpu_cc_sleep_clk.clkr,
+};
+
+static const struct qcom_reset_map gpu_cc_sm8350_resets[] = {
+	[GPUCC_GPU_CC_ACD_BCR] = { 0x1160 },
+	[GPUCC_GPU_CC_CB_BCR] = { 0x116c },
+	[GPUCC_GPU_CC_CX_BCR] = { 0x1068 },
+	[GPUCC_GPU_CC_FAST_HUB_BCR] = { 0x1174 },
+	[GPUCC_GPU_CC_GFX3D_AON_BCR] = { 0x10a0 },
+	[GPUCC_GPU_CC_GMU_BCR] = { 0x111c },
+	[GPUCC_GPU_CC_GX_BCR] = { 0x1008 },
+	[GPUCC_GPU_CC_XO_BCR] = { 0x1000 },
+};
+
+static struct gdsc *gpu_cc_sm8350_gdscs[] = {
+	[GPU_CX_GDSC] = &gpu_cx_gdsc,
+	[GPU_GX_GDSC] = &gpu_gx_gdsc,
+};
+
+static const struct regmap_config gpu_cc_sm8350_regmap_config = {
+	.reg_bits = 32,
+	.reg_stride = 4,
+	.val_bits = 32,
+	.max_register = 0x8030,
+	.fast_io = true,
+};
+
+static const struct qcom_cc_desc gpu_cc_sm8350_desc = {
+	.config = &gpu_cc_sm8350_regmap_config,
+	.clks = gpu_cc_sm8350_clocks,
+	.num_clks = ARRAY_SIZE(gpu_cc_sm8350_clocks),
+	.resets = gpu_cc_sm8350_resets,
+	.num_resets = ARRAY_SIZE(gpu_cc_sm8350_resets),
+	.gdscs = gpu_cc_sm8350_gdscs,
+	.num_gdscs = ARRAY_SIZE(gpu_cc_sm8350_gdscs),
+};
+
+static int gpu_cc_sm8350_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+
+	regmap = qcom_cc_map(pdev, &gpu_cc_sm8350_desc);
+	if (IS_ERR(regmap)) {
+		dev_err(&pdev->dev, "Failed to map gpu cc registers\n");
+		return PTR_ERR(regmap);
+	}
+
+	clk_lucid_pll_configure(&gpu_cc_pll0, regmap, &gpu_cc_pll0_config);
+	clk_lucid_pll_configure(&gpu_cc_pll1, regmap, &gpu_cc_pll1_config);
+
+	return qcom_cc_really_probe(pdev, &gpu_cc_sm8350_desc, regmap);
+}
+
+static const struct of_device_id gpu_cc_sm8350_match_table[] = {
+	{ .compatible = "qcom,sm8350-gpucc" },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, gpu_cc_sm8350_match_table);
+
+static struct platform_driver gpu_cc_sm8350_driver = {
+	.probe = gpu_cc_sm8350_probe,
+	.driver = {
+		.name = "sm8350-gpucc",
+		.of_match_table = gpu_cc_sm8350_match_table,
+	},
+};
+
+static int __init gpu_cc_sm8350_init(void)
+{
+	return platform_driver_register(&gpu_cc_sm8350_driver);
+}
+subsys_initcall(gpu_cc_sm8350_init);
+
+static void __exit gpu_cc_sm8350_exit(void)
+{
+	platform_driver_unregister(&gpu_cc_sm8350_driver);
+}
+module_exit(gpu_cc_sm8350_exit);
+
+MODULE_DESCRIPTION("QTI GPU_CC SM8350 Driver");
+MODULE_LICENSE("GPL v2");
-- 
2.34.1

[PATCH v8 3/5] dt-bindings: clock: Add Qcom SM8350 DISPCC bindings

[Robert Foss]

From: Jonathan Marek <jonathan@marek.ca>

Add sm8350 DISPCC bindings, which are simply a symlink to the sm8250
bindings. Update the documentation with the new compatible.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---

Changes since v2
 - Add SoB - Bjorn

Changes since v3
 - Separate from qcom,dispcc-sm8x50
 - Remove clock-names
 - Make example sm8350 based
 - Changed author to me due to size of changes

Changes since v4
 - Add RB - Rob

Changes since v5
 - Reverted split from dispcc-sm8250
 - Re-added tags from v3


 .../devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml       | 6 ++++--
 include/dt-bindings/clock/qcom,dispcc-sm8350.h              | 1 +
 2 files changed, 5 insertions(+), 2 deletions(-)
 create mode 120000 include/dt-bindings/clock/qcom,dispcc-sm8350.h

diff --git a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
index 31497677e8de..7a8d375e055e 100644
--- a/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
+++ b/Documentation/devicetree/bindings/clock/qcom,dispcc-sm8x50.yaml
@@ -4,18 +4,19 @@
 $id: http://devicetree.org/schemas/clock/qcom,dispcc-sm8x50.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
-title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250
+title: Qualcomm Display Clock & Reset Controller Binding for SM8150/SM8250/SM8350
 
 maintainers:
   - Jonathan Marek <jonathan@marek.ca>
 
 description: |
   Qualcomm display clock control module which supports the clocks, resets and
-  power domains on SM8150 and SM8250.
+  power domains on SM8150/SM8250/SM8350.
 
   See also:
     dt-bindings/clock/qcom,dispcc-sm8150.h
     dt-bindings/clock/qcom,dispcc-sm8250.h
+    dt-bindings/clock/qcom,dispcc-sm8350.h
 
 properties:
   compatible:
@@ -23,6 +24,7 @@ properties:
       - qcom,sc8180x-dispcc
       - qcom,sm8150-dispcc
       - qcom,sm8250-dispcc
+      - qcom,sm8350-dispcc
 
   clocks:
     items:
diff --git a/include/dt-bindings/clock/qcom,dispcc-sm8350.h b/include/dt-bindings/clock/qcom,dispcc-sm8350.h
new file mode 120000
index 000000000000..0312b4544acb
--- /dev/null
+++ b/include/dt-bindings/clock/qcom,dispcc-sm8350.h
@@ -0,0 +1 @@
+qcom,dispcc-sm8250.h
\ No newline at end of file
-- 
2.34.1

[PATCH v8 4/5] clk: qcom: add support for SM8350 DISPCC

[Robert Foss]

From: Jonathan Marek <jonathan@marek.ca>

Add support to the SM8350 display clock controller by extending the SM8250
display clock controller, which is almost identical but has some minor
differences.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---

Changes since v1
 - Remove comment - Dmitry

Changes since v2
 - Add my SoB - Bjorn
 - Remove CLK_ASSUME_ENABLED_WHEN_UNUSED flag

Changes since v3
 - Add kconfig dependency on SM_GCC_8350 - Konrad
 - Change hex to lowercase - Konrad
 - Split from dispcc-sm8250.c implementation
 - Switch from .fw_name to .index

Changes since v4
 - Hex to lowercase - Konrad
 - Remove bad match table entries - Konrad

Changes since v5
 - Reverted split from dispcc-sm8250
 - Re-added tags from v3

Changes since v6
 - Added kconfig dependency - Konrad
 - Don't remove comment - Konrad



 drivers/clk/qcom/Kconfig         |  6 +--
 drivers/clk/qcom/dispcc-sm8250.c | 63 +++++++++++++++++++++++++++++++-
 2 files changed, 65 insertions(+), 4 deletions(-)

diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 4c5bae4fb38d..f197e99aef84 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -619,11 +619,11 @@ config SM_DISPCC_6125
 	  splash screen
 
 config SM_DISPCC_8250
-	tristate "SM8150 and SM8250 Display Clock Controller"
-	depends on SM_GCC_8150 || SM_GCC_8250
+	tristate "SM8150/SM8250/SM8350 Display Clock Controller"
+	depends on SM_GCC_8150 || SM_GCC_8250 || SM_GCC_8350
 	help
 	  Support for the display clock controller on Qualcomm Technologies, Inc
-	  SM8150 and SM8250 devices.
+	  SM8150/SM8250/SM8350 devices.
 	  Say Y if you want to support display devices and functionality such as
 	  splash screen.
 
diff --git a/drivers/clk/qcom/dispcc-sm8250.c b/drivers/clk/qcom/dispcc-sm8250.c
index db9379634fb2..39b344ebb049 100644
--- a/drivers/clk/qcom/dispcc-sm8250.c
+++ b/drivers/clk/qcom/dispcc-sm8250.c
@@ -43,6 +43,10 @@ static struct pll_vco vco_table[] = {
 	{ 249600000, 2000000000, 0 },
 };
 
+static struct pll_vco lucid_5lpe_vco[] = {
+	{ 249600000, 1750000000, 0 },
+};
+
 static struct alpha_pll_config disp_cc_pll0_config = {
 	.l = 0x47,
 	.alpha = 0xE000,
@@ -1228,6 +1232,7 @@ static const struct of_device_id disp_cc_sm8250_match_table[] = {
 	{ .compatible = "qcom,sc8180x-dispcc" },
 	{ .compatible = "qcom,sm8150-dispcc" },
 	{ .compatible = "qcom,sm8250-dispcc" },
+	{ .compatible = "qcom,sm8350-dispcc" },
 	{ }
 };
 MODULE_DEVICE_TABLE(of, disp_cc_sm8250_match_table);
@@ -1258,7 +1263,7 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 		return PTR_ERR(regmap);
 	}
 
-	/* note: trion == lucid, except for the prepare() op */
+	/* Apply differences for SM8150 and SM8350 */
 	BUILD_BUG_ON(CLK_ALPHA_PLL_TYPE_TRION != CLK_ALPHA_PLL_TYPE_LUCID);
 	if (of_device_is_compatible(pdev->dev.of_node, "qcom,sc8180x-dispcc") ||
 	    of_device_is_compatible(pdev->dev.of_node, "qcom,sm8150-dispcc")) {
@@ -1270,6 +1275,62 @@ static int disp_cc_sm8250_probe(struct platform_device *pdev)
 		disp_cc_pll1_config.config_ctl_hi1_val = 0x00000024;
 		disp_cc_pll1_config.user_ctl_hi1_val = 0x000000D0;
 		disp_cc_pll1_init.ops = &clk_alpha_pll_trion_ops;
+	} else if (of_device_is_compatible(pdev->dev.of_node, "qcom,sm8350-dispcc")) {
+		static struct clk_rcg2 * const rcgs[] = {
+			&disp_cc_mdss_byte0_clk_src,
+			&disp_cc_mdss_byte1_clk_src,
+			&disp_cc_mdss_dp_aux1_clk_src,
+			&disp_cc_mdss_dp_aux_clk_src,
+			&disp_cc_mdss_dp_link1_clk_src,
+			&disp_cc_mdss_dp_link_clk_src,
+			&disp_cc_mdss_dp_pixel1_clk_src,
+			&disp_cc_mdss_dp_pixel2_clk_src,
+			&disp_cc_mdss_dp_pixel_clk_src,
+			&disp_cc_mdss_esc0_clk_src,
+			&disp_cc_mdss_mdp_clk_src,
+			&disp_cc_mdss_pclk0_clk_src,
+			&disp_cc_mdss_pclk1_clk_src,
+			&disp_cc_mdss_rot_clk_src,
+			&disp_cc_mdss_vsync_clk_src,
+		};
+		static struct clk_regmap_div * const divs[] = {
+			&disp_cc_mdss_byte0_div_clk_src,
+			&disp_cc_mdss_byte1_div_clk_src,
+			&disp_cc_mdss_dp_link1_div_clk_src,
+			&disp_cc_mdss_dp_link_div_clk_src,
+		};
+		unsigned int i;
+		static bool offset_applied;
+
+		/*
+		 * note: trion == lucid, except for the prepare() op
+		 * only apply the offsets once (in case of deferred probe)
+		 */
+		if (!offset_applied) {
+			for (i = 0; i < ARRAY_SIZE(rcgs); i++)
+				rcgs[i]->cmd_rcgr -= 4;
+
+			for (i = 0; i < ARRAY_SIZE(divs); i++) {
+				divs[i]->reg -= 4;
+				divs[i]->width = 4;
+			}
+
+			disp_cc_mdss_ahb_clk.halt_reg -= 4;
+			disp_cc_mdss_ahb_clk.clkr.enable_reg -= 4;
+
+			offset_applied = true;
+		}
+
+		disp_cc_mdss_ahb_clk_src.cmd_rcgr = 0x22a0;
+
+		disp_cc_pll0_config.config_ctl_hi1_val = 0x2a9a699c;
+		disp_cc_pll0_config.test_ctl_hi1_val = 0x01800000;
+		disp_cc_pll0_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
+		disp_cc_pll0.vco_table = lucid_5lpe_vco;
+		disp_cc_pll1_config.config_ctl_hi1_val = 0x2a9a699c;
+		disp_cc_pll1_config.test_ctl_hi1_val = 0x01800000;
+		disp_cc_pll1_init.ops = &clk_alpha_pll_lucid_5lpe_ops;
+		disp_cc_pll1.vco_table = lucid_5lpe_vco;
 	}
 
 	clk_lucid_pll_configure(&disp_cc_pll0, regmap, &disp_cc_pll0_config);
-- 
2.34.1

[PATCH v8 5/5] arm64: dts: qcom: sm8350: Add DISPCC node

[Robert Foss]

Add the dispcc clock-controller DT node for sm8350.

Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---

Changes since v2
 - Remove interconnect include - Bjorn

Changes since v3
 - Switch from .fw_name to .index

Changes since v5
 - Revert .fw_name to .index change

Changes since v6
 - Add r-b - Konrad


 arch/arm64/boot/dts/qcom/sm8350.dtsi | 26 ++++++++++++++++++++++++++
 1 file changed, 26 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 447a02f10463..aa0ca45ca184 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -4,6 +4,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,dispcc-sm8350.h>
 #include <dt-bindings/clock/qcom,gcc-sm8350.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
@@ -2531,6 +2532,31 @@ usb_2_dwc3: usb@a800000 {
 			};
 		};
 
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,sm8350-dispcc";
+			reg = <0 0x0af00000 0 0x10000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+			clock-names = "bi_tcxo",
+				      "dsi0_phy_pll_out_byteclk",
+				      "dsi0_phy_pll_out_dsiclk",
+				      "dsi1_phy_pll_out_byteclk",
+				      "dsi1_phy_pll_out_dsiclk",
+				      "dp_phy_pll_link_clk",
+				      "dp_phy_pll_vco_div_clk";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+
+			power-domains = <&rpmhpd SM8350_MMCX>;
+			power-domain-names = "mmcx";
+		};
+
 		adsp: remoteproc@17300000 {
 			compatible = "qcom,sm8350-adsp-pas";
 			reg = <0 0x17300000 0 0x100>;
-- 
2.34.1

Re: (subset) [PATCH v8 5/5] arm64: dts: qcom: sm8350: Add DISPCC node

[Bjorn Andersson]

On Wed, 6 Jul 2022 17:43:37 +0200, Robert Foss wrote:
> Add the dispcc clock-controller DT node for sm8350.
> 
> 

Applied, thanks!

[5/5] arm64: dts: qcom: sm8350: Add DISPCC node
      commit: 9fd4887cdec6395a4ff447af8988bce61b707fb0

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>

Re: (subset) [PATCH v8 0/5] SM8350 Display/GPU clock enablement

[Bjorn Andersson]

On Wed, 6 Jul 2022 17:43:32 +0200, Robert Foss wrote:
> Changes since v2
>  - Dropped "clk: Introduce CLK_ASSUME_ENABLED_WHEN_UNUSED"
>  - Dropped "clk: qcom: sm8250-dispcc: Flag shared RCGs as assumed enable"
>  - Dropped "clk: qcom: rcg2: Cache rate changes for parked RCGs"
> 
> Changes since v3:
>  - Dropped RBs & SoBs for bigger changes
>  - Changed author to me for patches with big changes
> 
> [...]

Applied, thanks!

[1/5] dt-bindings: clock: Add Qcom SM8350 GPUCC bindings
      commit: e67a004482c092e326b32f24d4542c85fb8f79bf
[3/5] dt-bindings: clock: Add Qcom SM8350 DISPCC bindings
      commit: 909e5be2ca882a0384018370f065ef1c611e6ed9

Best regards,
-- 
Bjorn Andersson <bjorn.andersson@linaro.org>