From: "Pali Rohár" <pali@kernel.org>
To: "Andrew Lunn" <andrew@lunn.ch>,
"Gregory Clement" <gregory.clement@bootlin.com>,
"Sebastian Hesselbarth" <sebastian.hesselbarth@gmail.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Marek Behún" <kabel@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 09/11] ARM: dts: armada-380.dtsi: Add definitions for PCIe legacy INTx interrupts
Date: Wed, 6 Jul 2022 20:31:12 +0200 [thread overview]
Message-ID: <20220706183114.30783-10-pali@kernel.org> (raw)
In-Reply-To: <20220706183114.30783-1-pali@kernel.org>
Signed-off-by: Pali Rohár <pali@kernel.org>
---
arch/arm/boot/dts/armada-380.dtsi | 42 ++++++++++++++++++++++++++-----
1 file changed, 36 insertions(+), 6 deletions(-)
diff --git a/arch/arm/boot/dts/armada-380.dtsi b/arch/arm/boot/dts/armada-380.dtsi
index cff1269f3fbf..ce1dddb2269b 100644
--- a/arch/arm/boot/dts/armada-380.dtsi
+++ b/arch/arm/boot/dts/armada-380.dtsi
@@ -64,16 +64,26 @@
reg = <0x0800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
0x81000000 0 0 0x81000000 0x1 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie1_intc 0>,
+ <0 0 0 2 &pcie1_intc 1>,
+ <0 0 0 3 &pcie1_intc 2>,
+ <0 0 0 4 &pcie1_intc 3>;
marvell,pcie-port = <0>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 8>;
status = "disabled";
+
+ pcie1_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/* x1 port */
@@ -83,16 +93,26 @@
reg = <0x1000 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
0x81000000 0 0 0x81000000 0x2 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie2_intc 0>,
+ <0 0 0 2 &pcie2_intc 1>,
+ <0 0 0 3 &pcie2_intc 2>,
+ <0 0 0 4 &pcie2_intc 3>;
marvell,pcie-port = <1>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 5>;
status = "disabled";
+
+ pcie2_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
/* x1 port */
@@ -102,16 +122,26 @@
reg = <0x1800 0 0 0 0>;
#address-cells = <3>;
#size-cells = <2>;
+ interrupt-names = "intx";
+ interrupts-extended = <&gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <1>;
ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
0x81000000 0 0 0x81000000 0x3 0 1 0>;
bus-range = <0x00 0xff>;
- interrupt-map-mask = <0 0 0 0>;
- interrupt-map = <0 0 0 0 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie3_intc 0>,
+ <0 0 0 2 &pcie3_intc 1>,
+ <0 0 0 3 &pcie3_intc 2>,
+ <0 0 0 4 &pcie3_intc 3>;
marvell,pcie-port = <2>;
marvell,pcie-lane = <0>;
clocks = <&gateclk 6>;
status = "disabled";
+
+ pcie3_intc: interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
};
};
};
--
2.20.1
next prev parent reply other threads:[~2022-07-06 18:35 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-06 18:31 [PATCH 00/11] ARM: dts: mvebu: Add definitions for PCIe legacy INTx interrupts Pali Rohár
2022-07-06 18:31 ` [PATCH 01/11] ARM: dts: kirkwood: " Pali Rohár
2022-07-06 18:31 ` [PATCH 02/11] ARM: dts: dove: " Pali Rohár
2022-07-06 18:31 ` [PATCH 03/11] ARM: dts: armada-370.dtsi: " Pali Rohár
2022-07-06 18:31 ` [PATCH 04/11] ARM: dts: armada-xp-98dx3236.dtsi: " Pali Rohár
2022-07-06 18:31 ` [PATCH 05/11] ARM: dts: armada-xp-mv78230.dtsi: " Pali Rohár
2022-07-06 18:31 ` [PATCH 06/11] ARM: dts: armada-xp-mv78260.dtsi: " Pali Rohár
2022-07-06 18:31 ` [PATCH 07/11] ARM: dts: armada-xp-mv78460.dtsi: " Pali Rohár
2022-07-06 18:31 ` [PATCH 08/11] ARM: dts: armada-375.dtsi: " Pali Rohár
2022-07-06 18:31 ` Pali Rohár [this message]
2022-07-06 18:31 ` [PATCH 10/11] ARM: dts: armada-385.dtsi: " Pali Rohár
2022-07-06 18:31 ` [PATCH 11/11] ARM: dts: armada-39x.dtsi: " Pali Rohár
2022-07-06 20:53 ` [PATCH 00/11] ARM: dts: mvebu: " Andrew Lunn
2022-07-07 14:38 ` Marek Behún
2022-07-07 16:50 ` Andrew Lunn
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220706183114.30783-10-pali@kernel.org \
--to=pali@kernel.org \
--cc=andrew@lunn.ch \
--cc=devicetree@vger.kernel.org \
--cc=gregory.clement@bootlin.com \
--cc=kabel@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).