From: Christian Marangi <ansuelsmth@gmail.com>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Cc: Christian Marangi <ansuelsmth@gmail.com>,
Jonathan McDowell <noodles@earth.li>
Subject: [PATCH v2 1/8] ARM: dts: qcom: add multiple missing pin definition for ipq8064
Date: Thu, 7 Jul 2022 03:09:35 +0200 [thread overview]
Message-ID: <20220707010943.20857-2-ansuelsmth@gmail.com> (raw)
In-Reply-To: <20220707010943.20857-1-ansuelsmth@gmail.com>
Add missing definition for mdio0 pins used for gpio-bitbang driver,i2c4
pins and rgmii2 pins for ipq8064.
Drop i2c4_pins node from ipq8064-ap148 dts as it's now moved to ipq8064
dtsi.
Drop mdio0_pins node from ipq8064-rb3011 dts as it's now moved to
ipq8064 dtsi.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
---
arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 6 -----
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 9 -------
arch/arm/boot/dts/qcom-ipq8064.dtsi | 32 +++++++++++++++++++++++
3 files changed, 32 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index b63d01d10189..a654d3c22c4f 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -7,12 +7,6 @@ / {
soc {
pinmux@800000 {
- i2c4_pins: i2c4_pinmux {
- pins = "gpio12", "gpio13";
- function = "gsbi4";
- bias-disable;
- };
-
buttons_pins: buttons_pins {
mux {
pins = "gpio54", "gpio65";
diff --git a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
index 9034f00f2bd8..5a65cce2500c 100644
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -307,15 +307,6 @@ mux {
};
};
- mdio0_pins: mdio0_pins {
- mux {
- pins = "gpio0", "gpio1";
- function = "gpio";
- drive-strength = <8>;
- bias-disable;
- };
- };
-
mdio1_pins: mdio1_pins {
mux {
pins = "gpio10", "gpio11";
diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 4b475d98343c..bc9987c841d0 100644
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -382,6 +382,13 @@ mux {
};
};
+ i2c4_pins: i2c4-default {
+ pins = "gpio12", "gpio13";
+ function = "gsbi4";
+ drive-strength = <12>;
+ bias-disable;
+ };
+
spi_pins: spi_pins {
mux {
pins = "gpio18", "gpio19", "gpio21";
@@ -424,6 +431,8 @@ mux {
pullups {
pins = "gpio39";
+ function = "nand";
+ drive-strength = <10>;
bias-pull-up;
};
@@ -431,9 +440,32 @@ hold {
pins = "gpio40", "gpio41", "gpio42",
"gpio43", "gpio44", "gpio45",
"gpio46", "gpio47";
+ function = "nand";
+ drive-strength = <10>;
bias-bus-hold;
};
};
+
+ mdio0_pins: mdio0-pins {
+ mux {
+ pins = "gpio0", "gpio1";
+ function = "mdio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
+
+ rgmii2_pins: rgmii2-pins {
+ mux {
+ pins = "gpio27", "gpio28", "gpio29",
+ "gpio30", "gpio31", "gpio32",
+ "gpio51", "gpio52", "gpio59",
+ "gpio60", "gpio61", "gpio62";
+ function = "rgmii2";
+ drive-strength = <8>;
+ bias-disable;
+ };
+ };
};
intc: interrupt-controller@2000000 {
--
2.36.1
next prev parent reply other threads:[~2022-07-07 1:10 UTC|newest]
Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-07 1:09 [PATCH v2 0/8] Add ipq806x missing bindings Christian Marangi
2022-07-07 1:09 ` Christian Marangi [this message]
2022-07-07 1:09 ` [PATCH v2 2/8] ARM: dts: qcom: add gsbi6 missing definition for ipq8064 Christian Marangi
2022-07-07 1:09 ` [PATCH v2 3/8] ARM: dts: qcom: add specific ipq8064 dtsi with smb208 rpm regulators Christian Marangi
2022-07-07 1:09 ` [PATCH v2 4/8] ARM: dts: qcom: add missing snps,dwmac compatible for gmac ipq8064 Christian Marangi
2022-07-07 1:09 ` [PATCH v2 5/8] ARM: dts: qcom: disable usb phy by default for ipq8064 Christian Marangi
2022-07-07 1:09 ` [PATCH v2 6/8] ARM: dts: qcom: reduce pci IO size to 64K " Christian Marangi
2022-07-07 1:09 ` [PATCH v2 7/8] ARM: dts: qcom: fix and add some missing gsbi node " Christian Marangi
2022-07-07 1:09 ` [PATCH v2 8/8] ARM: dts: qcom: add speedbin efuse nvmem binding Christian Marangi
2022-07-07 1:34 ` Christian Marangi
2022-07-07 1:09 ` [PATCH v2 8/8] ARM: dts: qcom: add speedbin efuse nvmem node Christian Marangi
2022-07-17 2:46 ` [PATCH v2 0/8] Add ipq806x missing bindings Bjorn Andersson
2022-07-17 9:20 ` Christian Marangi
2022-07-17 3:08 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220707010943.20857-2-ansuelsmth@gmail.com \
--to=ansuelsmth@gmail.com \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=noodles@earth.li \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).