[PATCH v1 0/2] iio: adc: npcm: add Arbel NPCM8XX support

[PATCH v1 0/2] iio: adc: npcm: add Arbel NPCM8XX support

[Tomer Maimon]

This patch set adds Arbel NPCM8XX Analog-to-Digital Converter (ADC) support 
to ADC NPCM driver.

The NPCM8XX ADC is a 12-bit converter for eight channel inputs.

The NPCM ADC driver tested on NPCM845 evaluation board.
Tomer Maimon (2):
  dt-bindings: iio: adc: npcm: Add npcm845 compatible string
  iio: adc: npcm: Add NPCM8XX support

 .../bindings/iio/adc/nuvoton,npcm750-adc.yaml |  5 ++-
 drivers/iio/adc/npcm_adc.c                    | 39 +++++++++++++++----
 2 files changed, 35 insertions(+), 9 deletions(-)

-- 
2.33.0

[PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string

[Tomer Maimon]

Add a compatible string for Nuvoton BMC NPCM845 ADC.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
 .../devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml     | 5 ++++-
 1 file changed, 4 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
index 001cf263b7d5..c9e9c5bf5e5b 100644
--- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
@@ -14,7 +14,10 @@ description:
 
 properties:
   compatible:
-    const: nuvoton,npcm750-adc
+    oneOf:
+      - items:
+          - const: nuvoton,npcm750-adc
+          - const: nuvoton,npcm845-adc
 
   reg:
     maxItems: 1
-- 
2.33.0

[PATCH v1 2/2] iio: adc: npcm: Add NPCM8XX support

[Tomer Maimon]

Adding ADC NPCM8XX support to NPCM ADC driver.
ADC NPCM8XX uses a different resolution and voltage reference.

As part of adding NPCM8XX support:
- Add NPCM8XX specific compatible string.
- Add data to handle architecture-specific ADC parameters.

Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
 drivers/iio/adc/npcm_adc.c | 39 ++++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 8 deletions(-)

diff --git a/drivers/iio/adc/npcm_adc.c b/drivers/iio/adc/npcm_adc.c
index f7bc0bb7f112..efacba256056 100644
--- a/drivers/iio/adc/npcm_adc.c
+++ b/drivers/iio/adc/npcm_adc.c
@@ -16,6 +16,12 @@
 #include <linux/uaccess.h>
 #include <linux/reset.h>
 
+struct npcm_adc_info {
+	u32 data_mask;
+	u32 internal_vref;
+	u32 res_bits;
+};
+
 struct npcm_adc {
 	bool int_status;
 	u32 adc_sample_hz;
@@ -34,6 +40,7 @@ struct npcm_adc {
 	 * has finished.
 	 */
 	struct mutex lock;
+	struct npcm_adc_info *data;
 };
 
 /* ADC registers */
@@ -52,13 +59,21 @@ struct npcm_adc {
 #define NPCM_ADCCON_CH(x)		((x) << 24)
 #define NPCM_ADCCON_DIV_SHIFT		1
 #define NPCM_ADCCON_DIV_MASK		GENMASK(8, 1)
-#define NPCM_ADC_DATA_MASK(x)		((x) & GENMASK(9, 0))
 
 #define NPCM_ADC_ENABLE		(NPCM_ADCCON_ADC_EN | NPCM_ADCCON_ADC_INT_EN)
 
 /* ADC General Definition */
-#define NPCM_RESOLUTION_BITS		10
-#define NPCM_INT_VREF_MV		2000
+static const struct npcm_adc_info npxm7xx_adc_info = {
+	.data_mask = GENMASK(9, 0),
+	.internal_vref = 2048,
+	.res_bits = 10,
+};
+
+static const struct npcm_adc_info npxm8xx_adc_info = {
+	.data_mask = GENMASK(11, 0),
+	.internal_vref = 1229,
+	.res_bits = 12,
+};
 
 #define NPCM_ADC_CHAN(ch) {					\
 	.type = IIO_VOLTAGE,					\
@@ -129,7 +144,8 @@ static int npcm_adc_read(struct npcm_adc *info, int *val, u8 channel)
 	if (ret < 0)
 		return ret;
 
-	*val = NPCM_ADC_DATA_MASK(ioread32(info->regs + NPCM_ADCDATA));
+	*val = ioread32(info->regs + NPCM_ADCDATA);
+	*val &= info->data->data_mask;
 
 	return 0;
 }
@@ -157,9 +173,9 @@ static int npcm_adc_read_raw(struct iio_dev *indio_dev,
 			vref_uv = regulator_get_voltage(info->vref);
 			*val = vref_uv / 1000;
 		} else {
-			*val = NPCM_INT_VREF_MV;
+			*val = info->data->internal_vref;
 		}
-		*val2 = NPCM_RESOLUTION_BITS;
+		*val2 = info->data->res_bits;
 		return IIO_VAL_FRACTIONAL_LOG2;
 	case IIO_CHAN_INFO_SAMP_FREQ:
 		*val = info->adc_sample_hz;
@@ -176,7 +192,8 @@ static const struct iio_info npcm_adc_iio_info = {
 };
 
 static const struct of_device_id npcm_adc_match[] = {
-	{ .compatible = "nuvoton,npcm750-adc", },
+	{ .compatible = "nuvoton,npcm750-adc", .data = &npxm7xx_adc_info},
+	{ .compatible = "nuvoton,npcm845-adc", .data = &npxm8xx_adc_info},
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, npcm_adc_match);
@@ -190,14 +207,20 @@ static int npcm_adc_probe(struct platform_device *pdev)
 	struct npcm_adc *info;
 	struct iio_dev *indio_dev;
 	struct device *dev = &pdev->dev;
+	const struct of_device_id *match;
 
 	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
 	if (!indio_dev)
 		return -ENOMEM;
 	info = iio_priv(indio_dev);
 
-	mutex_init(&info->lock);
+	match = of_match_node(npcm_adc_match, pdev->dev.of_node);
+	if (!match || !match->data) {
+		dev_err(dev, "Failed getting npcm_adc_data\n");
+		return -ENODEV;
+	}
 
+	info->data = (struct npcm_adc_info *)match->data;
 	info->dev = &pdev->dev;
 
 	info->regs = devm_platform_ioremap_resource(pdev, 0);
-- 
2.33.0

Re: [PATCH v1 2/2] iio: adc: npcm: Add NPCM8XX support

[Andy Shevchenko]

On Mon, Jul 11, 2022 at 3:59 PM Tomer Maimon <tmaimon77@gmail.com> wrote:
>
> Adding ADC NPCM8XX support to NPCM ADC driver.
> ADC NPCM8XX uses a different resolution and voltage reference.
>
> As part of adding NPCM8XX support:
> - Add NPCM8XX specific compatible string.
> - Add data to handle architecture-specific ADC parameters.

Good patch, but one change can make it even better!

...

>         struct device *dev = &pdev->dev;
> +       const struct of_device_id *match;
>
>         indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
>         if (!indio_dev)
>                 return -ENOMEM;
>         info = iio_priv(indio_dev);
>
> -       mutex_init(&info->lock);
> +       match = of_match_node(npcm_adc_match, pdev->dev.of_node);
> +       if (!match || !match->data) {
> +               dev_err(dev, "Failed getting npcm_adc_data\n");
> +               return -ENODEV;
> +       }
>
> +       info->data = (struct npcm_adc_info *)match->data;

Instead of above

  info->data = device_get_match_data(dev);
  if (!info->data)
    return -ENODEV;

-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v1 2/2] iio: adc: npcm: Add NPCM8XX support

[Andy Shevchenko]

On Mon, Jul 11, 2022 at 4:14 PM Andy Shevchenko
<andy.shevchenko@gmail.com> wrote:
> On Mon, Jul 11, 2022 at 3:59 PM Tomer Maimon <tmaimon77@gmail.com> wrote:

...

> >         struct device *dev = &pdev->dev;
> > +       const struct of_device_id *match;

> > +       match = of_match_node(npcm_adc_match, pdev->dev.of_node);
> > +       if (!match || !match->data) {
> > +               dev_err(dev, "Failed getting npcm_adc_data\n");
> > +               return -ENODEV;
> > +       }
> >
> > +       info->data = (struct npcm_adc_info *)match->data;
>
> Instead of above
>
>   info->data = device_get_match_data(dev);
>   if (!info->data)


>     return -ENODEV;

Or

  return dev_err_probe(dev, -EINVAL, "...\n");

if you want that message to be issued.


-- 
With Best Regards,
Andy Shevchenko

Re: [PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string

[Rob Herring]

On Mon, 11 Jul 2022 16:43:10 +0300, Tomer Maimon wrote:
> Add a compatible string for Nuvoton BMC NPCM845 ADC.
> 
> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
> ---
>  .../devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml     | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.example.dtb: adc@f000c000: compatible: 'oneOf' conditional failed, one must be fixed:
	['nuvoton,npcm750-adc'] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH v1 2/2] iio: adc: npcm: Add NPCM8XX support

[Tomer Maimon]

Hi Andy,

Thanks for your comments, they will be addressed next version.

On Mon, 11 Jul 2022 at 17:16, Andy Shevchenko <andy.shevchenko@gmail.com> wrote:
>
> On Mon, Jul 11, 2022 at 4:14 PM Andy Shevchenko
> <andy.shevchenko@gmail.com> wrote:
> > On Mon, Jul 11, 2022 at 3:59 PM Tomer Maimon <tmaimon77@gmail.com> wrote:
>
> ...
>
> > >         struct device *dev = &pdev->dev;
> > > +       const struct of_device_id *match;
>
> > > +       match = of_match_node(npcm_adc_match, pdev->dev.of_node);
> > > +       if (!match || !match->data) {
> > > +               dev_err(dev, "Failed getting npcm_adc_data\n");
> > > +               return -ENODEV;
> > > +       }
> > >
> > > +       info->data = (struct npcm_adc_info *)match->data;
> >
> > Instead of above
> >
> >   info->data = device_get_match_data(dev);
> >   if (!info->data)
>
>
> >     return -ENODEV;
>
> Or
>
>   return dev_err_probe(dev, -EINVAL, "...\n");
>
> if you want that message to be issued.
>
>
> --
> With Best Regards,
> Andy Shevchenko

Best regards,

Tomer

Re: [PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string

[Tomer Maimon]

Hi Rob,

Thanks for your comment, it will be addressed next version.

On Mon, 11 Jul 2022 at 20:55, Rob Herring <robh@kernel.org> wrote:
>
> On Mon, 11 Jul 2022 16:43:10 +0300, Tomer Maimon wrote:
> > Add a compatible string for Nuvoton BMC NPCM845 ADC.
> >
> > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
> > ---
> >  .../devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml     | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> >
>
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.example.dtb: adc@f000c000: compatible: 'oneOf' conditional failed, one must be fixed:
>         ['nuvoton,npcm750-adc'] is too short
>         From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/patch/
>
> This check can fail if there are any dependencies. The base for a patch
> series is generally the most recent rc1.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
>
> Please check and re-submit.
>

Best regards,

Tomer

Re: [PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string

[Krzysztof Kozlowski]

On 11/07/2022 15:43, Tomer Maimon wrote:
> Add a compatible string for Nuvoton BMC NPCM845 ADC.
> 
> Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
> ---
>  .../devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml     | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
> index 001cf263b7d5..c9e9c5bf5e5b 100644
> --- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
> @@ -14,7 +14,10 @@ description:
>  
>  properties:
>    compatible:
> -    const: nuvoton,npcm750-adc
> +    oneOf:
> +      - items:

This does not make sense. oneOf with one item. You also create now list
breaking all existing users/ABI.

You probably wanted an enum here.

> +          - const: nuvoton,npcm750-adc
> +          - const: nuvoton,npcm845-adc
>  
>    reg:
>      maxItems: 1


Best regards,
Krzysztof

Re: [PATCH v1 1/2] dt-bindings: iio: adc: npcm: Add npcm845 compatible string

[Tomer Maimon]

Hi Krzysztof,

On Tue, 12 Jul 2022 at 11:15, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> On 11/07/2022 15:43, Tomer Maimon wrote:
> > Add a compatible string for Nuvoton BMC NPCM845 ADC.
> >
> > Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
> > ---
> >  .../devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml     | 5 ++++-
> >  1 file changed, 4 insertions(+), 1 deletion(-)
> >
> > diff --git a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
> > index 001cf263b7d5..c9e9c5bf5e5b 100644
> > --- a/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
> > +++ b/Documentation/devicetree/bindings/iio/adc/nuvoton,npcm750-adc.yaml
> > @@ -14,7 +14,10 @@ description:
> >
> >  properties:
> >    compatible:
> > -    const: nuvoton,npcm750-adc
> > +    oneOf:
> > +      - items:
>
> This does not make sense. oneOf with one item. You also create now list
> breaking all existing users/ABI.
>
> You probably wanted an enum here.
indeed, thanks for your comment.
>
> > +          - const: nuvoton,npcm750-adc
> > +          - const: nuvoton,npcm845-adc
> >
> >    reg:
> >      maxItems: 1
>
>
> Best regards,
> Krzysztof

Best regards,

Tomer