From: Johan Hovold <johan+linaro@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Felipe Balbi <balbi@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>
Cc: Andy Gross <agross@kernel.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Wesley Cheng <quic_wcheng@quicinc.com>,
linux-arm-msm@vger.kernel.org, linux-usb@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Johan Hovold <johan+linaro@kernel.org>
Subject: [PATCH 1/7] dt-bindings: usb: qcom,dwc3: add SC8280XP binding
Date: Wed, 13 Jul 2022 15:13:34 +0200 [thread overview]
Message-ID: <20220713131340.29401-2-johan+linaro@kernel.org> (raw)
In-Reply-To: <20220713131340.29401-1-johan+linaro@kernel.org>
Add SC8280XP to the DT schema.
Note that the SC8280XP controllers use the common set of five clocks and
an additional set of four interconnect clocks whose purpose is not
entirely clear at this point.
The set of wakeup interrupts is also different for SC8280XP.
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
.../devicetree/bindings/usb/qcom,dwc3.yaml | 102 +++++++++++++++---
1 file changed, 88 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
index 749e1963ddbb..c991d9103f87 100644
--- a/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
+++ b/Documentation/devicetree/bindings/usb/qcom,dwc3.yaml
@@ -24,6 +24,7 @@ properties:
- qcom,qcs404-dwc3
- qcom,sc7180-dwc3
- qcom,sc7280-dwc3
+ - qcom,sc8280xp-dwc3
- qcom,sdm660-dwc3
- qcom,sdm845-dwc3
- qcom,sdx55-dwc3
@@ -66,11 +67,11 @@ properties:
- mock_utmi:: Mock utmi clock needed for ITP/SOF generation in host
mode. Its frequency should be 19.2MHz.
minItems: 1
- maxItems: 6
+ maxItems: 9
clock-names:
minItems: 1
- maxItems: 6
+ maxItems: 9
assigned-clocks:
items:
@@ -93,20 +94,10 @@ properties:
- const: apps-usb
interrupts:
- items:
- - description: The interrupt that is asserted
- when a wakeup event is received on USB2 bus.
- - description: The interrupt that is asserted
- when a wakeup event is received on USB3 bus.
- - description: Wakeup event on DM line.
- - description: Wakeup event on DP line.
+ maxItems: 4
interrupt-names:
- items:
- - const: hs_phy_irq
- - const: ss_phy_irq
- - const: dm_hs_phy_irq
- - const: dp_hs_phy_irq
+ maxItems: 4
qcom,select-utmi-as-pipe-clk:
description:
@@ -249,6 +240,28 @@ allOf:
- const: sleep
- const: mock_utmi
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-dwc3
+ then:
+ properties:
+ clocks:
+ maxItems: 9
+ clock-names:
+ items:
+ - const: cfg_noc
+ - const: core
+ - const: iface
+ - const: sleep
+ - const: mock_utmi
+ - const: noc_aggr
+ - const: noc_aggr_north
+ - const: noc_aggr_south
+ - const: noc_sys
+
- if:
properties:
compatible:
@@ -311,6 +324,67 @@ allOf:
- const: mock_utmi
- const: xo
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,ipq4019-dwc3
+ - qcom,ipq6018-dwc3
+ - qcom,ipq8064-dwc3
+ - qcom,ipq8074-dwc3
+ - qcom,msm8953-dwc3
+ - qcom,msm8994-dwc3
+ - qcom,msm8996-dwc3
+ - qcom,msm8998-dwc3
+ - qcom,qcs404-dwc3
+ - qcom,sc7180-dwc3
+ - qcom,sc7280-dwc3
+ - qcom,sdm660-dwc3
+ - qcom,sdm845-dwc3
+ - qcom,sdx55-dwc3
+ - qcom,sdx65-dwc3
+ - qcom,sm4250-dwc3
+ - qcom,sm6115-dwc3
+ - qcom,sm6125-dwc3
+ - qcom,sm6350-dwc3
+ - qcom,sm8150-dwc3
+ - qcom,sm8250-dwc3
+ - qcom,sm8350-dwc3
+ - qcom,sm8450-dwc3
+ then:
+ properties:
+ interrupts:
+ items:
+ - description: The interrupt that is asserted
+ when a wakeup event is received on USB2 bus.
+ - description: The interrupt that is asserted
+ when a wakeup event is received on USB3 bus.
+ - description: Wakeup event on DM line.
+ - description: Wakeup event on DP line.
+ interrupt-names:
+ items:
+ - const: hs_phy_irq
+ - const: ss_phy_irq
+ - const: dm_hs_phy_irq
+ - const: dp_hs_phy_irq
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,sc8280xp-dwc3
+ then:
+ properties:
+ interrupts:
+ maxItems: 4
+ interrupt-names:
+ items:
+ - const: pwr_event
+ - const: dp_hs_phy_irq
+ - const: dm_hs_phy_irq
+ - const: ss_phy_irq
additionalProperties: false
--
2.35.1
next prev parent reply other threads:[~2022-07-13 13:18 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-13 13:13 [PATCH 0/7] usb: dwc3: add support for SC8280XP Johan Hovold
2022-07-13 13:13 ` Johan Hovold [this message]
2022-07-14 10:48 ` [PATCH 1/7] dt-bindings: usb: qcom,dwc3: add SC8280XP binding Krzysztof Kozlowski
2022-07-14 10:51 ` Krzysztof Kozlowski
2022-07-13 13:13 ` [PATCH 2/7] dt-bindings: usb: qcom,dwc3: refine interrupt requirements Johan Hovold
2022-07-14 10:50 ` Krzysztof Kozlowski
2022-07-13 13:13 ` [PATCH 3/7] usb: dwc3: qcom: fix missing optional irq warnings Johan Hovold
2022-07-13 14:00 ` Andrew Halaney
2022-07-13 13:13 ` [PATCH 4/7] arm64: dts: qcom: sc8280xp: fix USB clock order Johan Hovold
2022-07-14 10:52 ` Krzysztof Kozlowski
2022-07-13 13:13 ` [PATCH 5/7] arm64: dts: qcom: sc8280xp: fix USB interrupts Johan Hovold
2022-07-13 14:12 ` Andrew Halaney
2022-07-13 14:35 ` Johan Hovold
2022-07-13 14:43 ` Andrew Halaney
2022-07-13 15:03 ` Johan Hovold
2022-07-14 10:52 ` Krzysztof Kozlowski
2022-07-13 13:13 ` [PATCH 6/7] arm64: dts: qcom: sc7280: reorder " Johan Hovold
2022-07-14 10:54 ` Krzysztof Kozlowski
2022-07-13 13:13 ` [PATCH 7/7] arm64: dts: qcom: " Johan Hovold
2022-07-14 10:54 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220713131340.29401-2-johan+linaro@kernel.org \
--to=johan+linaro@kernel.org \
--cc=agross@kernel.org \
--cc=balbi@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=quic_wcheng@quicinc.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).