From: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
To: Andy Gross <agross@kernel.org>,
Bjorn Andersson <bjorn.andersson@linaro.org>,
Konrad Dybcio <konrad.dybcio@somainline.org>,
Stephen Boyd <sboyd@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Taniya Das <quic_tdas@quicinc.com>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org,
Yassine Oudjana <yassine.oudjana@gmail.com>,
Yassine Oudjana <y.oudjana@protonmail.com>
Subject: [PATCH 1/6] clk: qcom: msm8996-cpu: Use parent_data/_hws for all clocks
Date: Thu, 14 Jul 2022 13:03:46 +0300 [thread overview]
Message-ID: <20220714100351.1834711-2-dmitry.baryshkov@linaro.org> (raw)
In-Reply-To: <20220714100351.1834711-1-dmitry.baryshkov@linaro.org>
From: Yassine Oudjana <y.oudjana@protonmail.com>
Replace parent_names in PLLs, secondary muxes and primary muxes with
parent_data. For primary muxes there were never any *cl_pll_acd clocks,
so instead of adding them, put the primary PLLs in both PLL_INDEX and
ACD_INDEX, then make sure ACD_INDEX is always picked over PLL_INDEX when
setting parent since we always want ACD when using the primary PLLs.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
[DB: switch to parent_hws for pmux clocks]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
drivers/clk/qcom/clk-cpu-8996.c | 79 ++++++++++++++++++++-------------
1 file changed, 47 insertions(+), 32 deletions(-)
diff --git a/drivers/clk/qcom/clk-cpu-8996.c b/drivers/clk/qcom/clk-cpu-8996.c
index b3ad9245874d..708a8ad0c933 100644
--- a/drivers/clk/qcom/clk-cpu-8996.c
+++ b/drivers/clk/qcom/clk-cpu-8996.c
@@ -112,14 +112,18 @@ static const struct alpha_pll_config hfpll_config = {
.early_output_mask = BIT(3),
};
+static const struct clk_parent_data pll_parent[] = {
+ { .fw_name = "xo" },
+};
+
static struct clk_alpha_pll pwrcl_pll = {
.offset = PWRCL_REG_OFFSET,
.regs = prim_pll_regs,
.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data){
.name = "pwrcl_pll",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
+ .parent_data = pll_parent,
+ .num_parents = ARRAY_SIZE(pll_parent),
.ops = &clk_alpha_pll_huayra_ops,
},
};
@@ -130,8 +134,8 @@ static struct clk_alpha_pll perfcl_pll = {
.flags = SUPPORTS_DYNAMIC_UPDATE | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data){
.name = "perfcl_pll",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
+ .parent_data = pll_parent,
+ .num_parents = ARRAY_SIZE(pll_parent),
.ops = &clk_alpha_pll_huayra_ops,
},
};
@@ -190,8 +194,8 @@ static struct clk_alpha_pll pwrcl_alt_pll = {
.flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_alt_pll",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
+ .parent_data = pll_parent,
+ .num_parents = ARRAY_SIZE(pll_parent),
.ops = &clk_alpha_pll_hwfsm_ops,
},
};
@@ -204,8 +208,8 @@ static struct clk_alpha_pll perfcl_alt_pll = {
.flags = SUPPORTS_OFFLINE_REQ | SUPPORTS_FSM_MODE,
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_alt_pll",
- .parent_names = (const char *[]){ "xo" },
- .num_parents = 1,
+ .parent_data = pll_parent,
+ .num_parents = ARRAY_SIZE(pll_parent),
.ops = &clk_alpha_pll_hwfsm_ops,
},
};
@@ -252,6 +256,9 @@ static int clk_cpu_8996_pmux_set_parent(struct clk_hw *hw, u8 index)
u32 val;
val = index;
+ /* We always want ACD when using the primary PLL */
+ if (val == PLL_INDEX)
+ val = ACD_INDEX;
val <<= cpuclk->shift;
return regmap_update_bits(clkr->regmap, cpuclk->reg, mask, val);
@@ -282,17 +289,24 @@ static const struct clk_ops clk_cpu_8996_pmux_ops = {
.determine_rate = clk_cpu_8996_pmux_determine_rate,
};
+static const struct clk_parent_data pwrcl_smux_parents[] = {
+ { .fw_name = "xo" },
+ { .hw = &pwrcl_pll_postdiv.hw },
+};
+
+static const struct clk_parent_data perfcl_smux_parents[] = {
+ { .fw_name = "xo" },
+ { .hw = &perfcl_pll_postdiv.hw },
+};
+
static struct clk_regmap_mux pwrcl_smux = {
.reg = PWRCL_REG_OFFSET + MUX_OFFSET,
.shift = 2,
.width = 2,
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_smux",
- .parent_names = (const char *[]){
- "xo",
- "pwrcl_pll_postdiv",
- },
- .num_parents = 2,
+ .parent_data = pwrcl_smux_parents,
+ .num_parents = ARRAY_SIZE(pwrcl_smux_parents),
.ops = &clk_regmap_mux_closest_ops,
.flags = CLK_SET_RATE_PARENT,
},
@@ -304,16 +318,27 @@ static struct clk_regmap_mux perfcl_smux = {
.width = 2,
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_smux",
- .parent_names = (const char *[]){
- "xo",
- "perfcl_pll_postdiv",
- },
- .num_parents = 2,
+ .parent_data = perfcl_smux_parents,
+ .num_parents = ARRAY_SIZE(perfcl_smux_parents),
.ops = &clk_regmap_mux_closest_ops,
.flags = CLK_SET_RATE_PARENT,
},
};
+static const struct clk_hw *pwrcl_pmux_parents[] = {
+ [SMUX_INDEX] = &pwrcl_smux.clkr.hw,
+ [PLL_INDEX] = &pwrcl_pll.clkr.hw,
+ [ACD_INDEX] = &pwrcl_pll.clkr.hw,
+ [ALT_INDEX] = &pwrcl_alt_pll.clkr.hw,
+};
+
+static const struct clk_hw *perfcl_pmux_parents[] = {
+ [SMUX_INDEX] = &perfcl_smux.clkr.hw,
+ [PLL_INDEX] = &perfcl_pll.clkr.hw,
+ [ACD_INDEX] = &perfcl_pll.clkr.hw,
+ [ALT_INDEX] = &perfcl_alt_pll.clkr.hw,
+};
+
static struct clk_cpu_8996_pmux pwrcl_pmux = {
.reg = PWRCL_REG_OFFSET + MUX_OFFSET,
.shift = 0,
@@ -323,13 +348,8 @@ static struct clk_cpu_8996_pmux pwrcl_pmux = {
.nb.notifier_call = cpu_clk_notifier_cb,
.clkr.hw.init = &(struct clk_init_data) {
.name = "pwrcl_pmux",
- .parent_names = (const char *[]){
- "pwrcl_smux",
- "pwrcl_pll",
- "pwrcl_pll_acd",
- "pwrcl_alt_pll",
- },
- .num_parents = 4,
+ .parent_hws = pwrcl_pmux_parents,
+ .num_parents = ARRAY_SIZE(pwrcl_pmux_parents),
.ops = &clk_cpu_8996_pmux_ops,
/* CPU clock is critical and should never be gated */
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
@@ -345,13 +365,8 @@ static struct clk_cpu_8996_pmux perfcl_pmux = {
.nb.notifier_call = cpu_clk_notifier_cb,
.clkr.hw.init = &(struct clk_init_data) {
.name = "perfcl_pmux",
- .parent_names = (const char *[]){
- "perfcl_smux",
- "perfcl_pll",
- "perfcl_pll_acd",
- "perfcl_alt_pll",
- },
- .num_parents = 4,
+ .parent_hws = perfcl_pmux_parents,
+ .num_parents = ARRAY_SIZE(perfcl_pmux_parents),
.ops = &clk_cpu_8996_pmux_ops,
/* CPU clock is critical and should never be gated */
.flags = CLK_SET_RATE_PARENT | CLK_IS_CRITICAL,
--
2.35.1
next prev parent reply other threads:[~2022-07-14 10:04 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-14 10:03 [PATCH 0/6] clk: qcom: cpu-8996: additional cleanup for the driver Dmitry Baryshkov
2022-07-14 10:03 ` Dmitry Baryshkov [this message]
2022-07-14 10:03 ` [PATCH 2/6] clk: qcom: cpu-8996: switch to devm_clk_notifier_register Dmitry Baryshkov
2022-07-14 10:03 ` [PATCH 3/6] clk: qcom: cpu-8996: declare ACD clocks Dmitry Baryshkov
2022-07-14 10:03 ` [PATCH 4/6] clk: qcom: cpu-8996: move ACD logic to clk_cpu_8996_pmux_determine_rate Dmitry Baryshkov
2022-07-14 10:03 ` [PATCH 5/6] clk: qcom: cpu-8996: don't store parents in clk_cpu_8996_pmux Dmitry Baryshkov
2022-07-14 10:03 ` [PATCH 6/6] clk: qcom: cpu-8996: use constant mask for pmux Dmitry Baryshkov
2022-09-09 10:22 ` [PATCH 0/6] clk: qcom: cpu-8996: additional cleanup for the driver Dmitry Baryshkov
2022-09-14 3:19 ` Bjorn Andersson
2022-09-14 12:18 ` Yassine Oudjana
2022-09-15 17:01 ` Dmitry Baryshkov
2022-09-27 3:22 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220714100351.1834711-2-dmitry.baryshkov@linaro.org \
--to=dmitry.baryshkov@linaro.org \
--cc=agross@kernel.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=konrad.dybcio@somainline.org \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=mturquette@baylibre.com \
--cc=quic_tdas@quicinc.com \
--cc=robh+dt@kernel.org \
--cc=sboyd@kernel.org \
--cc=y.oudjana@protonmail.com \
--cc=yassine.oudjana@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).