[PATCH v2 2/4] arm64: dts: qcom: sc8280xp: fix USB interrupts

[Johan Hovold <johan+linaro@kernel.org>]

The two single-port SC8280XP USB controllers do not have an hs_phy_irq
interrupt. Instead they have a pwr_event interrupt which is distinct
from the former and not yet supported by the driver.

Fix the USB node interrupt names so that they match the devicetree
binding.

Also fix the pwr_event interrupt of the second controller which should
be 811 as noticed by Andrew Halaney.

Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
---
 arch/arm64/boot/dts/qcom/sc8280xp.dtsi | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 45cc7d714fd2..f002a63d8507 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -1875,8 +1875,10 @@ usb_0: usb@a6f8800 {
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 138 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
-					  "dm_hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_PRIM_GDSC>;
 
@@ -1921,12 +1923,14 @@ usb_1: usb@a8f8800 {
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 811 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 136 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "hs_phy_irq", "dp_hs_phy_irq",
-					  "dm_hs_phy_irq", "ss_phy_irq";
+			interrupt-names = "pwr_event",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
 
 			power-domains = <&gcc USB30_SEC_GDSC>;
 
-- 
2.35.1