[PATCH 1/3] arm64: dts: qcom: sdm845: Fill in GENI DMA references

devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed

From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Bjorn Andersson <bjorn.andersson@linaro.org>,
	Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, vinod.koul@linaro.org
Subject: [PATCH 1/3] arm64: dts: qcom: sdm845: Fill in GENI DMA references
Date: Sat, 16 Jul 2022 20:44:01 -0700	[thread overview]
Message-ID: <20220717034403.2135027-2-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20220717034403.2135027-1-bjorn.andersson@linaro.org>

The I2C and SPI might be configured in GPI DMA mode, fill in the
properties needed for this.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 90 ++++++++++++++++++++++++++++
 1 file changed, 90 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index 7fb10c2ef2fb..7735efd233e4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -1208,6 +1208,9 @@ i2c0: i2c@880000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1262,6 +1265,9 @@ i2c1: i2c@884000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1278,6 +1284,9 @@ spi1: spi@884000 {
 				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1313,6 +1322,9 @@ i2c2: i2c@888000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1329,6 +1341,9 @@ spi2: spi@888000 {
 				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1364,6 +1379,9 @@ i2c3: i2c@88c000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1380,6 +1398,9 @@ spi3: spi@88c000 {
 				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1415,6 +1436,9 @@ i2c4: i2c@890000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1431,6 +1455,9 @@ spi4: spi@890000 {
 				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1466,6 +1493,9 @@ i2c5: i2c@894000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1482,6 +1512,9 @@ spi5: spi@894000 {
 				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1517,6 +1550,9 @@ i2c6: i2c@898000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1533,6 +1569,9 @@ spi6: spi@898000 {
 				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1580,6 +1619,9 @@ spi7: spi@89c000 {
 				interconnects = <&aggre1_noc MASTER_QUP_1 0 &config_noc SLAVE_BLSP_1 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_1 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1653,6 +1695,9 @@ i2c8: i2c@a80000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
 						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1669,6 +1714,9 @@ spi8: spi@a80000 {
 				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1704,6 +1752,9 @@ i2c9: i2c@a84000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
 						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1720,6 +1771,9 @@ spi9: spi@a84000 {
 				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1755,6 +1809,9 @@ i2c10: i2c@a88000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
 						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1771,6 +1828,9 @@ spi10: spi@a88000 {
 				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1806,6 +1866,9 @@ i2c11: i2c@a8c000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
 						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1822,6 +1885,9 @@ spi11: spi@a8c000 {
 				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1857,6 +1923,9 @@ i2c12: i2c@a90000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
 						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1873,6 +1942,9 @@ spi12: spi@a90000 {
 				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1908,6 +1980,9 @@ i2c13: i2c@a94000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
 						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1924,6 +1999,9 @@ spi13: spi@a94000 {
 				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1959,6 +2037,9 @@ i2c14: i2c@a98000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
 						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -1975,6 +2056,9 @@ spi14: spi@a98000 {
 				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
@@ -2011,6 +2095,9 @@ i2c15: i2c@a9c000 {
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>,
 						<&aggre2_noc MASTER_QUP_2 0 &mem_noc SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx", "rx";
 			};
 
 			spi15: spi@a9c000 {
@@ -2026,6 +2113,9 @@ spi15: spi@a9c000 {
 				interconnects = <&aggre2_noc MASTER_QUP_2 0 &config_noc SLAVE_BLSP_2 0>,
 						<&gladiator_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_BLSP_2 0>;
 				interconnect-names = "qup-core", "qup-config";
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx", "rx";
 				status = "disabled";
 			};
 
-- 
2.35.1

next prev parent reply	other threads:[~2022-07-17  3:41 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-17  3:44 [PATCH 0/3] arm64: dts: qcom: sdm845-db845: Some i2c fixes Bjorn Andersson
2022-07-17  3:44 ` Bjorn Andersson [this message]
2022-07-17  3:44 ` [PATCH 2/3] arm64: dts: qcom: sdm845-db845c: Enable gpi_dma1 Bjorn Andersson
2022-07-17  3:44 ` [PATCH 3/3] arm64: dts: qcom: sdm845-db845c: Specify a i2c bus clocks Bjorn Andersson
2022-07-18  5:31 ` [PATCH 0/3] arm64: dts: qcom: sdm845-db845: Some i2c fixes Vinod Koul
2022-07-19  4:47 ` Bjorn Andersson

find likely ancestor, descendant, or conflicting patches for this message:
( dfblob:7fb10c2ef2f dfblob:7735efd233e )
 OR (
bs:"[PATCH 1/3] arm64: dts: qcom: sdm845: Fill in GENI DMA references" )
	(help)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220717034403.2135027-2-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konrad.dybcio@somainline.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=vinod.koul@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link

Be sure your reply has a Subject: header at the top and a blank line before the message body.

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).