[PATCH 1/3] ARM: dts: qcom: ipq8064: add v2 dtsi variant

[Christian Marangi <ansuelsmth@gmail.com>]

Add ipq8064-v2.0 dtsi variant that differ from original ipq8064 SoC for
some additional pcie, sata and usb configuration values, additional
reserved memory and serial output.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---
 .../boot/dts/qcom-ipq8064-v2.0-smb208.dtsi    | 37 ++++++++++
 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi      | 69 +++++++++++++++++++
 2 files changed, 106 insertions(+)
 create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
 create mode 100644 arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi

diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
new file mode 100644
index 000000000000..0442580b22de
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0-smb208.dtsi
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064-v2.0.dtsi"
+
+&rpm {
+	smb208_regulators: regulators {
+		compatible = "qcom,rpm-smb208-regulators";
+
+		smb208_s1a: s1a {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s1b: s1b {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1150000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2a: s2a {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+
+		smb208_s2b: s2b {
+			regulator-min-microvolt = < 800000>;
+			regulator-max-microvolt = <1250000>;
+
+			qcom,switch-mode-frequency = <1200000>;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
new file mode 100644
index 000000000000..2f117d576daf
--- /dev/null
+++ b/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include "qcom-ipq8064.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. IPQ8064-v2.0";
+
+	aliases {
+		serial0 = &gsbi4_serial;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	 * The i2c device on gsbi4 should not be enabled.
+	 * On ipq806x designs gsbi4 i2c is meant for exclusive
+	 * RPM usage. Turning this on in kernel manifests as
+	 * i2c failure for the RPM.
+	 */
+};
+
+&pcie0 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie1 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&pcie2 {
+	compatible = "qcom,pcie-ipq8064-v2";
+};
+
+&sata {
+	ports-implemented = <0x1>;
+};
+
+&ss_phy_0 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
+
+&ss_phy_1 {
+	qcom,rx-eq = <2>;
+	qcom,tx-deamp_3_5db = <32>;
+	qcom,mpll = <5>;
+};
-- 
2.36.1