From: Rob Herring <robh@kernel.org>
To: Gene Chen <gene.chen.richtek@gmail.com>
Cc: linux@roeck-us.net, heikki.krogerus@linux.intel.com,
gregkh@linuxfoundation.org, krzysztof.kozlowski+dt@linaro.org,
linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org,
devicetree@vger.kernel.org, gene_chen@richtek.com,
cy_huang@richtek.com
Subject: Re: [PATCH 1/3] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H
Date: Wed, 20 Jul 2022 15:39:00 -0600 [thread overview]
Message-ID: <20220720213900.GA4021129-robh@kernel.org> (raw)
In-Reply-To: <20220715100418.155011-2-gene.chen.richtek@gmail.com>
On Fri, Jul 15, 2022 at 06:04:16PM +0800, Gene Chen wrote:
> From: Gene Chen <gene_chen@richtek.com>
>
> Add binding for Richtek RT1711H
>
> Signed-off-by: Gene Chen <gene_chen@richtek.com>
> ---
> .../bindings/usb/richtek,rt1711h.yaml | 96 +++++++++++++++++++
> 1 file changed, 96 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
>
> diff --git a/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
> new file mode 100644
> index 000000000000..b6daca71429b
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/richtek,rt1711h.yaml
> @@ -0,0 +1,96 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/usb/richtek,rt1711h.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Richtek RT1711H Type-C Port Switch and Power Delivery controller DT bindings
s/ DT bindings//
> +
> +maintainers:
> + - Gene Chen <gene_chen@richtek.com>
> +
> +description: |
Don't need '|' if no formatting.
> + - Richtek RT1711H TypeC PD Controller.
'-' should be dropped. Though if you can't say more than the title, you
might as well drop entirely.
> +
> +properties:
> + compatible:
> + oneOf:
Don't need oneOf with only 1 entry.
> + - enum:
> + - richtek,rt1711h
> + - richtek,rt1715
Perhaps 'description' should detail the differences in these parts.
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + wakeup-source:
> + description: enable IRQ remote wakeup, see power/wakeup-source.txt
Drop generic descriptions.
> + type: boolean
> +
> + connector:
> + type: object
> + $ref: ../connector/usb-connector.yaml#
full path:
/schemas/connector/...
> + description:
> + Properties for usb c connector.
> +
> +additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> + - connector
> + - interrupts
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/irq.h>
> + #include <dt-bindings/usb/pd.h>
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + rt1711h@4e {
> + compatible = "richtek,rt1711h";
> + reg = <0x4e>;
> + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>;
> + wakeup-source;
> +
> + connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";
> + data-role = "dual";
> + power-role = "dual";
> + try-power-role = "sink";
> + source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
> + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>;
> + op-sink-microwatt = <10000000>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + endpoint {
> + remote-endpoint = <&usb_hs>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + endpoint {
> + remote-endpoint = <&usb_ss>;
> + };
> + };
> + port@2 {
> + reg = <2>;
> + endpoint {
> + remote-endpoint = <&dp_aux>;
> + };
> + };
> + };
> + };
> + };
> + };
> +...
> --
> 2.25.1
>
>
next prev parent reply other threads:[~2022-07-20 21:39 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-15 10:04 [PATCH 0/3] usb: typec: tcpci_rt1711h: Add compatible with rt1715 Gene Chen
2022-07-15 10:04 ` [PATCH 1/3] dt-bindings usb: typec: rt1711h: Add binding for Richtek RT1711H Gene Chen
2022-07-20 21:39 ` Rob Herring [this message]
2022-07-15 10:04 ` [PATCH 2/3] usb: typec: tcpci: Add get cc tcpci callback Gene Chen
2022-07-15 13:39 ` Guenter Roeck
2022-07-15 10:04 ` [PATCH 3/3] usb: typec: tcpci_rt1711h: Add compatible with rt1715 Gene Chen
2022-07-15 11:40 ` Greg KH
2022-07-15 13:34 ` Guenter Roeck
2022-07-16 20:56 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220720213900.GA4021129-robh@kernel.org \
--to=robh@kernel.org \
--cc=cy_huang@richtek.com \
--cc=devicetree@vger.kernel.org \
--cc=gene.chen.richtek@gmail.com \
--cc=gene_chen@richtek.com \
--cc=gregkh@linuxfoundation.org \
--cc=heikki.krogerus@linux.intel.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=linux@roeck-us.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).