From: Rob Herring <robh@kernel.org>
To: Max Buchholz <max.buchholz@gmx.de>
Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>,
Thierry Reding <thierry.reding@gmail.com>,
Jonathan Hunter <jonathanh@nvidia.com>,
Sameer Pujar <spujar@nvidia.com>,
David Heidelberg <david@ixit.cz>,
linux-input@vger.kernel.org, devicetree@vger.kernel.org,
linux-tegra@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v3] dt-bindings: nvidia,tegra20-kbc: Convert to json-schema
Date: Wed, 20 Jul 2022 15:54:49 -0600 [thread overview]
Message-ID: <20220720215449.GA4031847-robh@kernel.org> (raw)
In-Reply-To: <20220715131422.51143-1-max.buchholz@gmx.de>
On Fri, Jul 15, 2022 at 03:14:21PM +0200, Max Buchholz wrote:
> From: Max Buchholz <Max.Buchholz@gmx.de>
>
> This converts the Nvidia Tegra keyboard controller bindings to YAML
> and fix them up a bit.
>
> Reviewed-by: David Heidelberg <david@ixit.cz>
> Signed-off-by: Max Buchholz <max.buchholz@gmx.de>
> ---
> v3:
> - fixed maxItems for array properties
> v2:
> - rework the file according to the feedback
>
> .../bindings/input/nvidia,tegra20-kbc.txt | 55 ---------
> .../bindings/input/nvidia,tegra20-kbc.yaml | 111 ++++++++++++++++++
> .../bindings/power/wakeup-source.txt | 2 +-
> 3 files changed, 112 insertions(+), 56 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
> create mode 100644 Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.yaml
>
> diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
> deleted file mode 100644
> index 1faa7292e21f..000000000000
> --- a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
> +++ /dev/null
> @@ -1,55 +0,0 @@
> -* Tegra keyboard controller
> -The key controller has maximum 24 pins to make matrix keypad. Any pin
> -can be configured as row or column. The maximum column pin can be 8
> -and maximum row pins can be 16 for Tegra20/Tegra30.
> -
> -Required properties:
> -- compatible: "nvidia,tegra20-kbc"
> -- reg: Register base address of KBC.
> -- interrupts: Interrupt number for the KBC.
> -- nvidia,kbc-row-pins: The KBC pins which are configured as row. This is an
> - array of pin numbers which is used as rows.
> -- nvidia,kbc-col-pins: The KBC pins which are configured as column. This is an
> - array of pin numbers which is used as column.
> -- linux,keymap: The keymap for keys as described in the binding document
> - devicetree/bindings/input/matrix-keymap.txt.
> -- clocks: Must contain one entry, for the module clock.
> - See ../clocks/clock-bindings.txt for details.
> -- resets: Must contain an entry for each entry in reset-names.
> - See ../reset/reset.txt for details.
> -- reset-names: Must include the following entries:
> - - kbc
> -
> -Optional properties, in addition to those specified by the shared
> -matrix-keyboard bindings:
> -
> -- linux,fn-keymap: a second keymap, same specification as the
> - matrix-keyboard-controller spec but to be used when the KEY_FN modifier
> - key is pressed.
> -- nvidia,debounce-delay-ms: delay in milliseconds per row scan for debouncing
> -- nvidia,repeat-delay-ms: delay in milliseconds before repeat starts
> -- nvidia,ghost-filter: enable ghost filtering for this device
> -- wakeup-source: configure keyboard as a wakeup source for suspend/resume
> - (Legacy property supported: "nvidia,wakeup-source")
> -
> -Example:
> -
> -keyboard: keyboard {
> - compatible = "nvidia,tegra20-kbc";
> - reg = <0x7000e200 0x100>;
> - interrupts = <0 85 0x04>;
> - clocks = <&tegra_car 36>;
> - resets = <&tegra_car 36>;
> - reset-names = "kbc";
> - nvidia,ghost-filter;
> - nvidia,debounce-delay-ms = <640>;
> - nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */
> - nvidia,kbc-col-pins = <11 12 13>; /* pin 11, 12, 13 as columns */
> - linux,keymap = <0x00000074
> - 0x00010067
> - 0x00020066
> - 0x01010068
> - 0x02000069
> - 0x02010070
> - 0x02020071>;
> -};
> diff --git a/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.yaml b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.yaml
> new file mode 100644
> index 000000000000..8e1eaad2fdc1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.yaml
> @@ -0,0 +1,111 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/input/nvidia,tegra20-kbc.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Nvidia Tegra keyboard controller
> +
> +maintainers:
> + - Jon Hunter <jonathanh@nvidia.com>
> + - Sameer Pujar <spujar@nvidia.com>
> +
> +description: The key controller has maximum 24 pins to make matrix keypad. Any pin
> + can be configured as row or column.
> +
> +allOf:
> + - $ref: "/schemas/input/matrix-keymap.yaml#"
> +
> +properties:
> + compatible:
> + oneOf:
> + - items:
> + - const: nvidia,tegra30-kbc
> + - const: nvidia,tegra20-kbc
> + - items:
> + - const: nvidia,tegra20-kbc
> +
> + reg:
> + maxItems: 1
> +
> + interrupts:
> + maxItems: 1
> +
> + nvidia,kbc-row-pins:
> + minItems: 1
> + maxItems: 16
> + description: KBC pins which are configured as row
> + $ref: /schemas/types.yaml#/definitions/uint32-array
items:
maximum: 24 (or 23?)
Also, put 'description' either first or last, not in the middle of
constraints.
> +
> + nvidia,kbc-col-pins:
> + minItems: 1
> + maxItems: 8
> + description: KBC pins which are configured as column
> + $ref: /schemas/types.yaml#/definitions/uint32-array
Same here.
> +
> + clocks:
> + maxItems: 1
> +
> + resets:
> + maxItems: 1
> +
> + reset-names:
> + const: kbc
> +
> + linux,fn-keymap:
While mentioned in matrix-keymap.yaml, it is not defined as a schema
anywhere. It needs a type. I guess here is fine as this doesn't seem
to be used much.
> + description: a secondary keymap to be used when the KEY_FN modifier key is pressed
> +
> + nvidia,debounce-delay-ms:
> + description: delay in milliseconds per row scan for debouncing
> +
> + nvidia,repeat-delay-ms:
> + description: delay in milliseconds before repeat starts
> +
> + nvidia,ghost-filter:
> + description: enable ghost filtering for this device
> + type: boolean
> +
> + wakeup-source:
> + description: configure keyboard as a wakeup source for suspend/resume
> +
> + nvidia,wakeup-source:
> + description: configure keyboard as a wakeup source for suspend/resume
> + deprecated: true
> + type: boolean
Deprecated for 7 years. Could be dropped?
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - nvidia,kbc-row-pins
> + - nvidia,kbc-col-pins
> + - linux,keymap
> + - clocks
> + - resets
> + - reset-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + kbc@7000e200 {
keyboard@...
> + compatible = "nvidia,tegra20-kbc";
> + reg = <0x7000e200 0x100>;
> + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&tegra_car 36>;
> + resets = <&tegra_car 36>;
> + reset-names = "kbc";
> + nvidia,ghost-filter;
> + nvidia,debounce-delay-ms = <640>;
> + nvidia,kbc-row-pins = <0 1 2>; /* pin 0, 1, 2 as rows */
> + nvidia,kbc-col-pins = <11 12 13>; /* pin 11, 12, 13 as columns */
> + linux,keymap = <0x00000074
> + 0x00010067
> + 0x00020066
> + 0x01010068
> + 0x02000069
> + 0x02010070
> + 0x02020071>;
> + };
> diff --git a/Documentation/devicetree/bindings/power/wakeup-source.txt b/Documentation/devicetree/bindings/power/wakeup-source.txt
> index cfd74659fbed..728f88de371d 100644
> --- a/Documentation/devicetree/bindings/power/wakeup-source.txt
> +++ b/Documentation/devicetree/bindings/power/wakeup-source.txt
> @@ -25,7 +25,7 @@ List of legacy properties and respective binding document
> Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
> 5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
> 6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt
> -7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
> +7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.yaml
>
> Examples
> --------
> --
> 2.37.0
>
>
next prev parent reply other threads:[~2022-07-20 21:54 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-15 13:14 [PATCH v3] dt-bindings: nvidia,tegra20-kbc: Convert to json-schema Max Buchholz
2022-07-20 21:54 ` Rob Herring [this message]
2022-08-27 13:05 ` Aw: " Max.Buchholz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220720215449.GA4031847-robh@kernel.org \
--to=robh@kernel.org \
--cc=david@ixit.cz \
--cc=devicetree@vger.kernel.org \
--cc=dmitry.torokhov@gmail.com \
--cc=jonathanh@nvidia.com \
--cc=linux-input@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=max.buchholz@gmx.de \
--cc=spujar@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).