From: William Zhang <william.zhang@broadcom.com>
To: william.zhang@broadcom.com
Cc: joel.peshkin@broadcom.com, dan.beygelman@broadcom.com,
"Rob Herring" <robh+dt@kernel.org>,
"Krzysztof Kozlowski" <krzysztof.kozlowski+dt@linaro.org>,
"Anand Gore" <anand.gore@broadcom.com>,
"Kursad Oney" <kursad.oney@broadcom.com>,
"Florian Fainelli" <f.fainelli@gmail.com>,
"Rafał Miłecki" <rafal@milecki.pl>,
"Broadcom internal kernel review list"
<bcm-kernel-feedback-list@broadcom.com>,
"Stefan Wahren" <stefan.wahren@i2se.com>,
"Nicolas Saenz Julienne" <nsaenz@kernel.org>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list),
linux-arm-kernel@lists.infradead.org (moderated list:BROADCOM
BCMBCA ARM ARCHITECTURE)
Subject: [PATCH 4/9] arm64: dts: Move BCM4908 dts to bcmbca folder
Date: Wed, 20 Jul 2022 16:52:38 -0700 [thread overview]
Message-ID: <20220720235238.29121-1-william.zhang@broadcom.com> (raw)
[-- Attachment #1: Type: text/plain, Size: 4795 bytes --]
Move the BCM4908 dts files to bcmbca folder. Use CONFIG_ARCH_BCMBCA to
build all the BCM4908 board dts. Remove bcm4908 folder and its makefile.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
---
arch/arm64/boot/dts/broadcom/Makefile | 1 -
arch/arm64/boot/dts/broadcom/bcm4908/Makefile | 5 -----
arch/arm64/boot/dts/broadcom/bcmbca/Makefile | 4 ++++
.../broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts | 0
.../{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts | 0
.../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi | 0
.../broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts | 0
.../broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts | 0
.../arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi | 0
9 files changed, 4 insertions(+), 6 deletions(-)
delete mode 100644 arch/arm64/boot/dts/broadcom/bcm4908/Makefile
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-netgear-r8000p.dts (100%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906-tplink-archer-c2300-v1.dts (100%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4906.dtsi (100%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-asus-gt-ac5300.dts (100%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908-netgear-raxe500.dts (100%)
rename arch/arm64/boot/dts/broadcom/{bcm4908 => bcmbca}/bcm4908.dtsi (100%)
diff --git a/arch/arm64/boot/dts/broadcom/Makefile b/arch/arm64/boot/dts/broadcom/Makefile
index e8584d3b698f..05d8c5ecf3b0 100644
--- a/arch/arm64/boot/dts/broadcom/Makefile
+++ b/arch/arm64/boot/dts/broadcom/Makefile
@@ -8,7 +8,6 @@ dtb-$(CONFIG_ARCH_BCM2835) += bcm2711-rpi-400.dtb \
bcm2837-rpi-cm3-io3.dtb \
bcm2837-rpi-zero-2-w.dtb
-subdir-y += bcm4908
subdir-y += bcmbca
subdir-y += northstar2
subdir-y += stingray
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile b/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
deleted file mode 100644
index 6e364e304d4f..000000000000
--- a/arch/arm64/boot/dts/broadcom/bcm4908/Makefile
+++ /dev/null
@@ -1,5 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-netgear-r8000p.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4906-tplink-archer-c2300-v1.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-asus-gt-ac5300.dtb
-dtb-$(CONFIG_ARCH_BCM4908) += bcm4908-netgear-raxe500.dtb
diff --git a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
index 38f14307184b..d30fa75f0611 100644
--- a/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
+++ b/arch/arm64/boot/dts/broadcom/bcmbca/Makefile
@@ -1,5 +1,9 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_BCMBCA) += \
+ bcm4906-netgear-r8000p.dtb \
+ bcm4906-tplink-archer-c2300-v1.dtb \
+ bcm4908-asus-gt-ac5300.dtb \
+ bcm4908-netgear-raxe500.dtb \
bcm4912-asus-gt-ax6000.dtb \
bcm94912.dtb \
bcm963158.dtb \
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-netgear-r8000p.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-netgear-r8000p.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906-tplink-archer-c2300-v1.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906-tplink-archer-c2300-v1.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4906.dtsi
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4906.dtsi
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-asus-gt-ac5300.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-asus-gt-ac5300.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908-netgear-raxe500.dts
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908-netgear-raxe500.dts
diff --git a/arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi b/arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
similarity index 100%
rename from arch/arm64/boot/dts/broadcom/bcm4908/bcm4908.dtsi
rename to arch/arm64/boot/dts/broadcom/bcmbca/bcm4908.dtsi
--
2.34.1
[-- Attachment #2: S/MIME Cryptographic Signature --]
[-- Type: application/pkcs7-signature, Size: 4212 bytes --]
reply other threads:[~2022-07-20 23:52 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220720235238.29121-1-william.zhang@broadcom.com \
--to=william.zhang@broadcom.com \
--cc=anand.gore@broadcom.com \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=dan.beygelman@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=f.fainelli@gmail.com \
--cc=joel.peshkin@broadcom.com \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=kursad.oney@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nsaenz@kernel.org \
--cc=rafal@milecki.pl \
--cc=robh+dt@kernel.org \
--cc=stefan.wahren@i2se.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).