From: Marcus Folkesson <marcus.folkesson@gmail.com>
To: Marcus Folkesson <marcus.folkesson@gmail.com>,
Kent Gustavsson <kent@minoris.se>,
Jonathan Cameron <jic23@kernel.org>,
Lars-Peter Clausen <lars@metafoo.de>,
Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v4 8/9] iio: adc: mcp3911: add support for oversampling ratio
Date: Fri, 22 Jul 2022 15:07:25 +0200 [thread overview]
Message-ID: <20220722130726.7627-9-marcus.folkesson@gmail.com> (raw)
In-Reply-To: <20220722130726.7627-1-marcus.folkesson@gmail.com>
The chip supports oversampling ratio, so expose it to userspace.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
---
drivers/iio/adc/mcp3911.c | 58 +++++++++++++++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
index 7db2c75da4ac..30c91ccc5fb6 100644
--- a/drivers/iio/adc/mcp3911.c
+++ b/drivers/iio/adc/mcp3911.c
@@ -39,6 +39,7 @@
#define MCP3911_REG_CONFIG 0x0c
#define MCP3911_CONFIG_CLKEXT BIT(1)
#define MCP3911_CONFIG_VREFEXT BIT(2)
+#define MCP3911_CONFIG_OSR GENMASK(13, 11)
#define MCP3911_REG_OFFCAL_CH0 0x0e
#define MCP3911_REG_GAINCAL_CH0 0x11
@@ -57,6 +58,8 @@
#define MCP3911_NUM_CHANNELS 2
+static const int mcp3911_osr_table[] = { 32, 64, 128, 256, 512, 1024, 2048, 4096 };
+
struct mcp3911 {
struct spi_device *spi;
struct mutex lock;
@@ -115,6 +118,36 @@ static int mcp3911_update(struct mcp3911 *adc, u8 reg, u32 mask,
return mcp3911_write(adc, reg, val, len);
}
+static int mcp3911_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ return IIO_VAL_INT;
+ default:
+ return IIO_VAL_INT_PLUS_NANO;
+ }
+}
+
+static int mcp3911_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ const int **vals, int *type, int *length,
+ long info)
+{
+ switch (info) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *type = IIO_VAL_INT;
+ *vals = mcp3911_osr_table;
+ *length = ARRAY_SIZE(mcp3911_osr_table);
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+}
+
static int mcp3911_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *channel, int *val,
int *val2, long mask)
@@ -143,6 +176,15 @@ static int mcp3911_read_raw(struct iio_dev *indio_dev,
ret = IIO_VAL_INT;
break;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ ret = mcp3911_read(adc, MCP3911_REG_CONFIG, val, 2);
+ if (ret)
+ goto out;
+
+ *val = FIELD_GET(MCP3911_CONFIG_OSR, *val);
+ *val = 32 << *val;
+ ret = IIO_VAL_INT;
+ break;
case IIO_CHAN_INFO_SCALE:
if (adc->vref) {
@@ -202,6 +244,17 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
MCP3911_STATUSCOM_EN_OFFCAL,
MCP3911_STATUSCOM_EN_OFFCAL, 2);
break;
+
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ for (int i = 0; i < sizeof(mcp3911_osr_table); i++) {
+ if (val == mcp3911_osr_table[i]) {
+ val = FIELD_PREP(MCP3911_CONFIG_OSR, i);
+ ret = mcp3911_update(adc, MCP3911_REG_CONFIG, MCP3911_CONFIG_OSR,
+ val, 2);
+ break;
+ }
+ }
+ break;
}
out:
@@ -214,9 +267,12 @@ static int mcp3911_write_raw(struct iio_dev *indio_dev,
.indexed = 1, \
.channel = idx, \
.scan_index = idx, \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
BIT(IIO_CHAN_INFO_OFFSET) | \
BIT(IIO_CHAN_INFO_SCALE), \
+ .info_mask_shared_by_type_available = \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO), \
.scan_type = { \
.sign = 's', \
.realbits = 24, \
@@ -273,6 +329,8 @@ static irqreturn_t mcp3911_trigger_handler(int irq, void *p)
static const struct iio_info mcp3911_info = {
.read_raw = mcp3911_read_raw,
.write_raw = mcp3911_write_raw,
+ .read_avail = mcp3911_read_avail,
+ .write_raw_get_fmt = mcp3911_write_raw_get_fmt,
};
static int mcp3911_config(struct mcp3911 *adc)
--
2.36.1
next prev parent reply other threads:[~2022-07-22 13:04 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-07-22 13:07 [PATCH v4 0/9] Improve MCP3911 driver Marcus Folkesson
2022-07-22 13:07 ` [PATCH v4 1/9] iio: adc: mcp3911: make use of the sign bit Marcus Folkesson
2022-07-22 13:07 ` [PATCH v4 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property Marcus Folkesson
2022-07-22 13:07 ` [PATCH v4 3/9] iio: adc: mcp3911: use correct formula for AD conversion Marcus Folkesson
2022-08-07 14:24 ` Jonathan Cameron
2022-07-22 13:07 ` [PATCH v4 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register Marcus Folkesson
2022-07-31 16:38 ` Jonathan Cameron
2022-07-31 16:39 ` Jonathan Cameron
2022-07-22 13:07 ` [PATCH v4 5/9] iio: adc: mcp3911: add support for buffers Marcus Folkesson
2022-07-31 16:51 ` Jonathan Cameron
2022-08-01 7:17 ` Marcus Folkesson
2022-07-22 13:07 ` [PATCH v4 6/9] iio: adc: mcp3911: add support for interrupts Marcus Folkesson
2022-07-31 16:52 ` Jonathan Cameron
2022-07-22 13:07 ` [PATCH v4 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry Marcus Folkesson
2022-07-22 13:07 ` Marcus Folkesson [this message]
2022-07-22 13:07 ` [PATCH v4 9/9] iio: adc: mcp3911: add support to set PGA Marcus Folkesson
2022-07-31 16:53 ` Jonathan Cameron
2022-07-31 16:41 ` [PATCH v4 0/9] Improve MCP3911 driver Jonathan Cameron
2022-08-01 7:45 ` Marcus Folkesson
2022-08-06 14:08 ` Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220722130726.7627-9-marcus.folkesson@gmail.com \
--to=marcus.folkesson@gmail.com \
--cc=andy.shevchenko@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=jic23@kernel.org \
--cc=kent@minoris.se \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).