devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Sven Peter <sven@svenpeter.dev>
To: Marcel Holtmann <marcel@holtmann.org>,
	Johan Hedberg <johan.hedberg@gmail.com>,
	Luiz Augusto von Dentz <luiz.dentz@gmail.com>
Cc: Sven Peter <sven@svenpeter.dev>,
	"David S. Miller" <davem@davemloft.net>,
	Eric Dumazet <edumazet@google.com>,
	Jakub Kicinski <kuba@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Paolo Abeni <pabeni@redhat.com>, Rob Herring <robh+dt@kernel.org>,
	Hector Martin <marcan@marcan.st>,
	Alyssa Rosenzweig <alyssa@rosenzweig.io>,
	asahi@lists.linux.dev, netdev@vger.kernel.org,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 3/5] Bluetooth: hci_event: Add quirk to ignore byte in LE Extended Adv Report
Date: Mon,  1 Aug 2022 12:36:31 +0200	[thread overview]
Message-ID: <20220801103633.27772-4-sven@svenpeter.dev> (raw)
In-Reply-To: <20220801103633.27772-1-sven@svenpeter.dev>

Broadcom controllers present on Apple Silicon devices use the upper
8 bits of the event type in the LE Extended Advertising Report for
the channel on which the frame has been received.
Add a quirk to drop the upper byte to ensure that the advertising
results are parsed correctly.

The following except from a btmon trace shows a report received on
channel 37 by these controllers:

> HCI Event: LE Meta Event (0x3e) plen 55                    #1 [hci0] 0.912271
      LE Extended Advertising Report (0x0d)
        Num reports: 1
        Entry 0
          Event type: 0x2513
            Props: 0x0013
              Connectable
              Scannable
              Use legacy advertising PDUs
            Data status: Complete
            Reserved (0x2500)
          Legacy PDU Type: Reserved (0x2513)
          Address type: Public (0x00)
          Address: XX:XX:XX:XX:XX:XX (Shenzhen Jingxun Software Telecommunication Technology Co.,Ltd)
          Primary PHY: LE 1M
          Secondary PHY: No packets
          SID: no ADI field (0xff)
          TX power: 127 dBm
          RSSI: -76 dBm (0xb4)
          Periodic advertising interval: 0.00 msec (0x0000)
          Direct address type: Public (0x00)
          Direct address: 00:00:00:00:00:00 (OUI 00-00-00)
          Data length: 0x1d
        02 01 18 09 ff 57 00 31 1f 01 3c 86 ab 03 16 df  .....W.1..<.....
        fd 0b 09 4a 42 4c 20 46 6c 69 70 20 35           ...JBL Flip 5
        Flags: 0x18
          Simultaneous LE and BR/EDR (Controller)
          Simultaneous LE and BR/EDR (Host)
        Company: Harman International Industries, Inc. (87)
          Data: 311f013c86ab
        Service Data (UUID 0xfddf):
        Name (complete): JBL Flip 5

Signed-off-by: Sven Peter <sven@svenpeter.dev>
---
 include/net/bluetooth/hci.h | 11 +++++++++++
 net/bluetooth/hci_event.c   |  4 ++++
 2 files changed, 15 insertions(+)

diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index fe7935be7dc4..47e1ee6f275d 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -274,6 +274,17 @@ enum {
 	 * during the hdev->setup vendor callback.
 	 */
 	HCI_QUIRK_BROKEN_ENHANCED_SETUP_SYNC_CONN,
+
+	/*
+	 * When this quirk is set, the upper 8 bits of the evt_type field of
+	 * the LE Extended Advertising Report events are discarded.
+	 * Some Broadcom controllers found in Apple machines put the channel
+	 * the report was received on into these reserved bits.
+	 *
+	 * This quirk can be set before hci_register_dev is called or
+	 * during the hdev->setup vendor callback.
+	 */
+	HCI_QUIRK_FIXUP_LE_EXT_ADV_REPORT_EVT_TYPE,
 };
 
 /* HCI device flags */
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index af17dfb20e01..0b5d70aeea93 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -6237,6 +6237,10 @@ static void hci_le_ext_adv_report_evt(struct hci_dev *hdev, void *data,
 			break;
 
 		evt_type = __le16_to_cpu(info->type);
+		if (test_bit(HCI_QUIRK_FIXUP_LE_EXT_ADV_REPORT_EVT_TYPE,
+			     &hdev->quirks))
+			evt_type &= 0xff;
+
 		legacy_evt_type = ext_evt_type_to_legacy(hdev, evt_type);
 		if (legacy_evt_type != LE_ADV_INVALID) {
 			process_adv_report(hdev, legacy_evt_type, &info->bdaddr,
-- 
2.25.1


  parent reply	other threads:[~2022-08-01 10:40 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-01 10:36 [PATCH 0/5] Broadcom/Apple Bluetooth driver for Apple Silicon Sven Peter
2022-08-01 10:36 ` [PATCH 1/5] dt-bindings: net: Add generic Bluetooth controller Sven Peter
2022-08-01 15:23   ` Rob Herring
2022-08-01 17:35     ` Sven Peter
2022-08-01 10:36 ` [PATCH 2/5] dt-bindings: net: Add Broadcom BCM4377 family PCI Bluetooth Sven Peter
2022-08-01 15:39   ` Rob Herring
2022-08-01 15:51     ` Mark Kettenis
2022-08-10 18:10       ` Rob Herring
2022-08-01 10:36 ` Sven Peter [this message]
2022-08-01 10:36 ` [PATCH 4/5] Bluetooth: Add quirk to disable extended scanning Sven Peter
2022-08-01 10:36 ` [PATCH 5/5] Bluetooth: hci_bcm4377: Add new driver for BCM4377 PCI boards Sven Peter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220801103633.27772-4-sven@svenpeter.dev \
    --to=sven@svenpeter.dev \
    --cc=alyssa@rosenzweig.io \
    --cc=asahi@lists.linux.dev \
    --cc=davem@davemloft.net \
    --cc=devicetree@vger.kernel.org \
    --cc=edumazet@google.com \
    --cc=johan.hedberg@gmail.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=kuba@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=luiz.dentz@gmail.com \
    --cc=marcan@marcan.st \
    --cc=marcel@holtmann.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).