From: Shenwei Wang <shenwei.wang@nxp.com>
To: Rob Herring <robh+dt@kernel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Peng Fan <peng.fan@nxp.com>
Cc: devicetree@vger.kernel.org, NXP Linux Team <linux-imx@nxp.com>,
Shenwei Wang <shenwei.wang@nxp.com>
Subject: [PATCH v5 0/3] add imx8dxl evk support
Date: Mon, 1 Aug 2022 15:01:18 -0500 [thread overview]
Message-ID: <20220801200121.672619-1-shenwei.wang@nxp.com> (raw)
i.MX8DXL is a device targeting the automotive and industrial market
segments. The chip is designed to achieve both high performance and
low power consumption. It has a dual (2x) Cortex-A35 processor.
The series of patches is to add the imx8dxl soc and its evk board
support.
changes in V5:
- change the "scu" node name to "system-controller"
- fix the typo in the comments for imx8dxl evk board
changes in V4:
- move i2c/mmc/serial aliases from soc to board
- correct the node names to follow the generic names recommendation
- remove some unused nodes in the evk board dts
changes in V3:
- re-order the commit sequence according to Krzysztof's feedback
- correct the syntax and styple problems pointed by Krzysztof
(Thank you for the detailed review, Krzysztof!)
- remove the unused nodes in imx8dxl-evk.dts
- dt_binding_check passed
Changes in V2:
- removed the edma2 device node because the edma v3 driver hasn't been
upstreamed yet.
- removed the imx8dxl_cm4 alias to fix the compile error.
- removed the extra blank lines at EOF.
- dt_binding_check passed.
Shenwei Wang (3):
dt-bindings: firmware: add missing resource IDs for imx8dxl
dt-bindings: arm: imx: update fsl.yaml for imx8dxl
arm64: dts: imx: add imx8dxl support
.../devicetree/bindings/arm/fsl.yaml | 6 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../arm64/boot/dts/freescale/imx8-ss-ddr.dtsi | 2 +-
.../arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 138 ++++++
.../boot/dts/freescale/imx8-ss-lsio.dtsi | 14 +
arch/arm64/boot/dts/freescale/imx8dxl-evk.dts | 463 ++++++++++++++++++
.../boot/dts/freescale/imx8dxl-ss-adma.dtsi | 72 +++
.../boot/dts/freescale/imx8dxl-ss-conn.dtsi | 145 ++++++
.../boot/dts/freescale/imx8dxl-ss-ddr.dtsi | 9 +
.../boot/dts/freescale/imx8dxl-ss-lsio.dtsi | 78 +++
arch/arm64/boot/dts/freescale/imx8dxl.dtsi | 238 +++++++++
include/dt-bindings/firmware/imx/rsrc.h | 7 +
12 files changed, 1172 insertions(+), 1 deletion(-)
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-adma.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-ddr.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl-ss-lsio.dtsi
create mode 100644 arch/arm64/boot/dts/freescale/imx8dxl.dtsi
--
2.25.1
next reply other threads:[~2022-08-01 20:01 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-01 20:01 Shenwei Wang [this message]
2022-08-01 20:01 ` [PATCH v5 1/3] dt-bindings: firmware: add missing resource IDs for imx8dxl Shenwei Wang
2022-08-01 20:01 ` [PATCH v5 2/3] dt-bindings: arm: imx: update fsl.yaml " Shenwei Wang
2022-08-01 20:01 ` [PATCH v5 3/3] arm64: dts: imx: add imx8dxl support Shenwei Wang
2022-08-05 16:22 ` Shenwei Wang
2022-08-08 5:47 ` Krzysztof Kozlowski
2022-08-08 18:16 ` [EXT] " Shenwei Wang
2022-08-09 4:16 ` Krzysztof Kozlowski
2022-08-09 16:41 ` Shenwei Wang
2022-08-18 12:08 ` Shenwei Wang
2022-08-21 13:14 ` Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220801200121.672619-1-shenwei.wang@nxp.com \
--to=shenwei.wang@nxp.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=linux-imx@nxp.com \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).