* [PATCH AUTOSEL 5.18 22/53] ARM: dts: imx6ul: add missing properties for sram
[not found] <20220808013350.314757-1-sashal@kernel.org>
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 23/53] ARM: dts: imx6ul: change operating-points to uint32-matrix Sasha Levin
` (12 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt,
krzysztof.kozlowski+dt, devicetree, linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit 5655699cf5cff9f4c4ee703792156bdd05d1addf ]
All 3 properties are required by sram.yaml. Fixes the dtbs_check
warning:
sram@900000: '#address-cells' is a required property
sram@900000: '#size-cells' is a required property
sram@900000: 'ranges' is a required property
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6ul.dtsi | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index afeec01f6522..1d435a46fc5c 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -149,6 +149,9 @@ soc {
ocram: sram@900000 {
compatible = "mmio-sram";
reg = <0x00900000 0x20000>;
+ ranges = <0 0x00900000 0x20000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
};
intc: interrupt-controller@a01000 {
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 23/53] ARM: dts: imx6ul: change operating-points to uint32-matrix
[not found] <20220808013350.314757-1-sashal@kernel.org>
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 22/53] ARM: dts: imx6ul: add missing properties for sram Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 24/53] ARM: dts: imx6ul: fix keypad compatible Sasha Levin
` (11 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt,
krzysztof.kozlowski+dt, devicetree, linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit edb67843983bbdf61b4c8c3c50618003d38bb4ae ]
operating-points is a uint32-matrix as per opp-v1.yaml. Change it
accordingly. While at it, change fsl,soc-operating-points as well,
although there is no bindings file (yet). But they should have the same
format. Fixes the dt_binding_check warning:
cpu@0: operating-points:0: [696000, 1275000, 528000, 1175000, 396000,
1025000, 198000, 950000] is too long
cpu@0: operating-points:0: Additional items are not allowed (528000,
1175000, 396000, 1025000, 198000, 950000 were unexpected)
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6ul.dtsi | 22 ++++++++++------------
1 file changed, 10 insertions(+), 12 deletions(-)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 1d435a46fc5c..2fcbd9d91521 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -64,20 +64,18 @@ cpu0: cpu@0 {
clock-frequency = <696000000>;
clock-latency = <61036>; /* two CLK32 periods */
#cooling-cells = <2>;
- operating-points = <
+ operating-points =
/* kHz uV */
- 696000 1275000
- 528000 1175000
- 396000 1025000
- 198000 950000
- >;
- fsl,soc-operating-points = <
+ <696000 1275000>,
+ <528000 1175000>,
+ <396000 1025000>,
+ <198000 950000>;
+ fsl,soc-operating-points =
/* KHz uV */
- 696000 1275000
- 528000 1175000
- 396000 1175000
- 198000 1175000
- >;
+ <696000 1275000>,
+ <528000 1175000>,
+ <396000 1175000>,
+ <198000 1175000>;
clocks = <&clks IMX6UL_CLK_ARM>,
<&clks IMX6UL_CLK_PLL2_BUS>,
<&clks IMX6UL_CLK_PLL2_PFD2>,
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 24/53] ARM: dts: imx6ul: fix keypad compatible
[not found] <20220808013350.314757-1-sashal@kernel.org>
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 22/53] ARM: dts: imx6ul: add missing properties for sram Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 23/53] ARM: dts: imx6ul: change operating-points to uint32-matrix Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 25/53] ARM: dts: imx6ul: fix csi node compatible Sasha Levin
` (10 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt,
krzysztof.kozlowski+dt, devicetree, linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit 7d15e0c9a515494af2e3199741cdac7002928a0e ]
According to binding, the compatible shall only contain imx6ul and imx21
compatibles. Fixes the dt_binding_check warning:
keypad@20b8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-kpp', 'fsl,imx6q-kpp', 'fsl,imx21-kpp'] is too long
Additional items are not allowed ('fsl,imx6q-kpp', 'fsl,imx21-kpp' were
unexpected)
Additional items are not allowed ('fsl,imx21-kpp' was unexpected)
'fsl,imx21-kpp' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6ul.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 2fcbd9d91521..df8b4ad62418 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -544,7 +544,7 @@ fec2: ethernet@20b4000 {
};
kpp: keypad@20b8000 {
- compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
+ compatible = "fsl,imx6ul-kpp", "fsl,imx21-kpp";
reg = <0x020b8000 0x4000>;
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_KPP>;
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 25/53] ARM: dts: imx6ul: fix csi node compatible
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (2 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 24/53] ARM: dts: imx6ul: fix keypad compatible Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 26/53] ARM: dts: imx6ul: fix lcdif " Sasha Levin
` (9 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt,
krzysztof.kozlowski+dt, devicetree, linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit e0aca931a2c7c29c88ebf37f9c3cd045e083483d ]
"fsl,imx6ul-csi" was never listed as compatible to "fsl,imx7-csi", neither
in yaml bindings, nor previous txt binding. Remove the imx7 part. Fixes
the dt schema check warning:
csi@21c4000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-csi', 'fsl,imx7-csi'] is too long
Additional items are not allowed ('fsl,imx7-csi' was unexpected)
'fsl,imx8mm-csi' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6ul.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index df8b4ad62418..367657a9a99f 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -999,7 +999,7 @@ cpu_speed_grade: speed-grade@10 {
};
csi: csi@21c4000 {
- compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
+ compatible = "fsl,imx6ul-csi";
reg = <0x021c4000 0x4000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_CSI>;
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 26/53] ARM: dts: imx6ul: fix lcdif node compatible
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (3 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 25/53] ARM: dts: imx6ul: fix csi node compatible Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 27/53] ARM: dts: imx6ul: fix qspi " Sasha Levin
` (8 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt,
krzysztof.kozlowski+dt, devicetree, linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit 1a884d17ca324531634cce82e9f64c0302bdf7de ]
In yaml binding "fsl,imx6ul-lcdif" is listed as compatible to imx6sx-lcdif,
but not imx28-lcdif. Change the list accordingly. Fixes the
dt_binding_check warning:
lcdif@21c8000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-lcdif', 'fsl,imx28-lcdif'] is too long
Additional items are not allowed ('fsl,imx28-lcdif' was unexpected)
'fsl,imx6ul-lcdif' is not one of ['fsl,imx23-lcdif', 'fsl,imx28-lcdif',
'fsl,imx6sx-lcdif']
'fsl,imx6sx-lcdif' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6ul.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index 367657a9a99f..bc6548058d8c 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -1008,7 +1008,7 @@ csi: csi@21c4000 {
};
lcdif: lcdif@21c8000 {
- compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
+ compatible = "fsl,imx6ul-lcdif", "fsl,imx6sx-lcdif";
reg = <0x021c8000 0x4000>;
interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clks IMX6UL_CLK_LCDIF_PIX>,
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 27/53] ARM: dts: imx6ul: fix qspi node compatible
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (4 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 26/53] ARM: dts: imx6ul: fix lcdif " Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 29/53] ARM: dts: ux500: Fix Janice accelerometer mounting matrix Sasha Levin
` (7 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Alexander Stein, Shawn Guo, Sasha Levin, robh+dt,
krzysztof.kozlowski+dt, devicetree, linux-arm-kernel
From: Alexander Stein <alexander.stein@ew.tq-group.com>
[ Upstream commit 0c6cf86e1ab433b2d421880fdd9c6e954f404948 ]
imx6ul is not compatible to imx6sx, both have different erratas.
Fixes the dt_binding_check warning:
spi@21e0000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,imx6ul-qspi', 'fsl,imx6sx-qspi'] is too long
Additional items are not allowed ('fsl,imx6sx-qspi' was unexpected)
'fsl,imx6ul-qspi' is not one of ['fsl,ls1043a-qspi']
'fsl,imx6ul-qspi' is not one of ['fsl,imx8mq-qspi']
'fsl,ls1021a-qspi' was expected
'fsl,imx7d-qspi' was expected
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/imx6ul.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6ul.dtsi b/arch/arm/boot/dts/imx6ul.dtsi
index bc6548058d8c..eca8bf89ab88 100644
--- a/arch/arm/boot/dts/imx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul.dtsi
@@ -1029,7 +1029,7 @@ pxp: pxp@21cc000 {
qspi: spi@21e0000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "fsl,imx6ul-qspi", "fsl,imx6sx-qspi";
+ compatible = "fsl,imx6ul-qspi";
reg = <0x021e0000 0x4000>, <0x60000000 0x10000000>;
reg-names = "QuadSPI", "QuadSPI-memory";
interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 29/53] ARM: dts: ux500: Fix Janice accelerometer mounting matrix
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (5 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 27/53] ARM: dts: imx6ul: fix qspi " Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 30/53] ARM: dts: ux500: Fix Codina " Sasha Levin
` (6 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Linus Walleij, Sasha Levin, robh+dt, krzysztof.kozlowski+dt,
linux-arm-kernel, devicetree
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit 013fda41c03e6bcb3dc416669187b609e9e5fdbc ]
This was fixed wrong so fix it again. Now verified by using
iio-sensor-proxy monitor-sensor test program.
Link: https://lore.kernel.org/r/20220609083516.329281-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/ste-ux500-samsung-janice.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
index 42762bfcd878..2069efb252a7 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-janice.dts
@@ -610,8 +610,8 @@ i2c-gate {
accelerometer@8 {
compatible = "bosch,bma222";
reg = <0x08>;
- mount-matrix = "0", "1", "0",
- "-1", "0", "0",
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
"0", "0", "1";
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 30/53] ARM: dts: ux500: Fix Codina accelerometer mounting matrix
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (6 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 29/53] ARM: dts: ux500: Fix Janice accelerometer mounting matrix Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 31/53] ARM: dts: ux500: Fix Gavini " Sasha Levin
` (5 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Linus Walleij, Sasha Levin, robh+dt, krzysztof.kozlowski+dt,
linux-arm-kernel, devicetree
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit 0b2152e428ab91533a02888ff24e52e788dc4637 ]
This was fixed wrong so fix it again. Now verified by using
iio-sensor-proxy monitor-sensor test program.
Link: https://lore.kernel.org/r/20220611204249.472250-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/ste-ux500-samsung-codina.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
index 1c1725d31c7c..0a10fb0a3741 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-codina.dts
@@ -566,8 +566,8 @@ lisd3dh@19 {
reg = <0x19>;
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
- mount-matrix = "0", "-1", "0",
- "1", "0", "0",
+ mount-matrix = "0", "1", "0",
+ "-1", "0", "0",
"0", "0", "1";
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 31/53] ARM: dts: ux500: Fix Gavini accelerometer mounting matrix
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (7 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 30/53] ARM: dts: ux500: Fix Codina " Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 32/53] arm64: dts: qcom: timer should use only 32-bit size Sasha Levin
` (4 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Linus Walleij, Sasha Levin, robh+dt, krzysztof.kozlowski+dt,
linux-arm-kernel, devicetree
From: Linus Walleij <linus.walleij@linaro.org>
[ Upstream commit e24c75f02a81d6ddac0072cbd7a03e799c19d558 ]
This was fixed wrong so fix it. Now verified by using
iio-sensor-proxy monitor-sensor test program.
Link: https://lore.kernel.org/r/20220611205138.491513-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/ste-ux500-samsung-gavini.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
index fd170974765f..149838b5f9c1 100644
--- a/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
+++ b/arch/arm/boot/dts/ste-ux500-samsung-gavini.dts
@@ -523,8 +523,8 @@ i2c-gate {
accelerometer@18 {
compatible = "bosch,bma222e";
reg = <0x18>;
- mount-matrix = "0", "1", "0",
- "-1", "0", "0",
+ mount-matrix = "0", "-1", "0",
+ "1", "0", "0",
"0", "0", "1";
vddio-supply = <&ab8500_ldo_aux2_reg>; // 1.8V
vdd-supply = <&ab8500_ldo_aux1_reg>; // 3V
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 32/53] arm64: dts: qcom: timer should use only 32-bit size
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (8 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 31/53] ARM: dts: ux500: Fix Gavini " Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 40/53] ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART Sasha Levin
` (3 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: David Heidelberg, Bjorn Andersson, Sasha Levin, agross, robh+dt,
krzysztof.kozlowski+dt, linux-arm-msm, devicetree
From: David Heidelberg <david@ixit.cz>
[ Upstream commit 458ebdbb8e5d596a462d8125cec74142ff5dfa97 ]
There's no reason the timer needs > 32-bits of address or size.
Since we using 32-bit size, we need to define ranges properly.
Fixes warnings as:
```
arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dt.yaml: timer@17c90000: #size-cells:0:0: 1 was expected
From schema: Documentation/devicetree/bindings/timer/arm,arch_timer_mmio.yaml
```
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626105800.35586-1-david@ixit.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq6018.dtsi | 22 +++++++++++-----------
arch/arm64/boot/dts/qcom/sc7180.dtsi | 22 +++++++++++-----------
arch/arm64/boot/dts/qcom/sc7280.dtsi | 22 +++++++++++-----------
arch/arm64/boot/dts/qcom/sdm845.dtsi | 22 +++++++++++-----------
arch/arm64/boot/dts/qcom/sm6350.dtsi | 22 +++++++++++-----------
arch/arm64/boot/dts/qcom/sm8150.dtsi | 22 +++++++++++-----------
arch/arm64/boot/dts/qcom/sm8250.dtsi | 22 +++++++++++-----------
arch/arm64/boot/dts/qcom/sm8350.dtsi | 22 +++++++++++-----------
arch/arm64/boot/dts/qcom/sm8450.dtsi | 22 +++++++++++-----------
9 files changed, 99 insertions(+), 99 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index aac56575e30d..5cdec104d899 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -525,9 +525,9 @@ timer {
};
timer@b120000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x10000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x0b120000 0x0 0x1000>;
@@ -535,49 +535,49 @@ frame@b120000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b121000 0x0 0x1000>,
- <0x0 0x0b122000 0x0 0x1000>;
+ reg = <0x0b121000 0x1000>,
+ <0x0b122000 0x1000>;
};
frame@b123000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0xb123000 0x0 0x1000>;
+ reg = <0x0b123000 0x1000>;
status = "disabled";
};
frame@b124000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b124000 0x0 0x1000>;
+ reg = <0x0b124000 0x1000>;
status = "disabled";
};
frame@b125000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b125000 0x0 0x1000>;
+ reg = <0x0b125000 0x1000>;
status = "disabled";
};
frame@b126000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b126000 0x0 0x1000>;
+ reg = <0x0b126000 0x1000>;
status = "disabled";
};
frame@b127000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b127000 0x0 0x1000>;
+ reg = <0x0b127000 0x1000>;
status = "disabled";
};
frame@b128000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x0b128000 0x0 0x1000>;
+ reg = <0x0b128000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index e1c46b80f14a..e9fb3c9a2d6e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3388,9 +3388,9 @@ watchdog@17c10000 {
};
timer@17c20000{
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c20000 0 0x1000>;
@@ -3398,49 +3398,49 @@ frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c21000 0 0x1000>,
- <0 0x17c22000 0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c23000 0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c25000 0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c27000 0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c29000 0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2b000 0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2d000 0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index f0b64be63c21..8a4fd614d0a1 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -4395,9 +4395,9 @@ watchdog@17c10000 {
};
timer@17c20000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c20000 0 0x1000>;
@@ -4405,49 +4405,49 @@ frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c21000 0 0x1000>,
- <0 0x17c22000 0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c23000 0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c25000 0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c27000 0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c29000 0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2b000 0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17c2d000 0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index ad21cf465c98..cd0029ff8246 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -4942,9 +4942,9 @@ slimbam: dma-controller@17184000 {
};
timer@17c90000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0 0x17c90000 0 0x1000>;
@@ -4952,49 +4952,49 @@ frame@17ca0000 {
frame-number = <0>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17ca0000 0 0x1000>,
- <0 0x17cb0000 0 0x1000>;
+ reg = <0x17ca0000 0x1000>,
+ <0x17cb0000 0x1000>;
};
frame@17cc0000 {
frame-number = <1>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17cc0000 0 0x1000>;
+ reg = <0x17cc0000 0x1000>;
status = "disabled";
};
frame@17cd0000 {
frame-number = <2>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17cd0000 0 0x1000>;
+ reg = <0x17cd0000 0x1000>;
status = "disabled";
};
frame@17ce0000 {
frame-number = <3>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17ce0000 0 0x1000>;
+ reg = <0x17ce0000 0x1000>;
status = "disabled";
};
frame@17cf0000 {
frame-number = <4>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17cf0000 0 0x1000>;
+ reg = <0x17cf0000 0x1000>;
status = "disabled";
};
frame@17d00000 {
frame-number = <5>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17d00000 0 0x1000>;
+ reg = <0x17d00000 0x1000>;
status = "disabled";
};
frame@17d10000 {
frame-number = <6>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0 0x17d10000 0 0x1000>;
+ reg = <0x17d10000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index d7c9edff19f7..c31fe27a46f2 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1090,57 +1090,57 @@ timer@17c20000 {
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c27000 0x0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index 15f3bf2e7ea0..d4f288edf3c9 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3608,9 +3608,9 @@ watchdog@17c10000 {
};
timer@17c20000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
@@ -3619,49 +3619,49 @@ frame@17c21000{
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c26000 0x0 0x1000>;
+ reg = <0x17c26000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 1304b86af1a0..ed4e288c921f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -4528,9 +4528,9 @@ watchdog@17c10000 {
};
timer@17c20000 {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
compatible = "arm,armv7-timer-mem";
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
@@ -4539,49 +4539,49 @@ frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c27000 0x0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 20f850b94158..d843a550314a 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1752,9 +1752,9 @@ intc: interrupt-controller@17a00000 {
timer@17c20000 {
compatible = "arm,armv7-timer-mem";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
reg = <0x0 0x17c20000 0x0 0x1000>;
clock-frequency = <19200000>;
@@ -1762,49 +1762,49 @@ frame@17c21000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c21000 0x0 0x1000>,
- <0x0 0x17c22000 0x0 0x1000>;
+ reg = <0x17c21000 0x1000>,
+ <0x17c22000 0x1000>;
};
frame@17c23000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c23000 0x0 0x1000>;
+ reg = <0x17c23000 0x1000>;
status = "disabled";
};
frame@17c25000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c25000 0x0 0x1000>;
+ reg = <0x17c25000 0x1000>;
status = "disabled";
};
frame@17c27000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c27000 0x0 0x1000>;
+ reg = <0x17c27000 0x1000>;
status = "disabled";
};
frame@17c29000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c29000 0x0 0x1000>;
+ reg = <0x17c29000 0x1000>;
status = "disabled";
};
frame@17c2b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2b000 0x0 0x1000>;
+ reg = <0x17c2b000 0x1000>;
status = "disabled";
};
frame@17c2d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17c2d000 0x0 0x1000>;
+ reg = <0x17c2d000 0x1000>;
status = "disabled";
};
};
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 7a14eb89e4ca..e5fe694b7be6 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1203,9 +1203,9 @@ intc: interrupt-controller@17100000 {
timer@17420000 {
compatible = "arm,armv7-timer-mem";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x20000000>;
reg = <0x0 0x17420000 0x0 0x1000>;
clock-frequency = <19200000>;
@@ -1213,49 +1213,49 @@ frame@17421000 {
frame-number = <0>;
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17421000 0x0 0x1000>,
- <0x0 0x17422000 0x0 0x1000>;
+ reg = <0x17421000 0x1000>,
+ <0x17422000 0x1000>;
};
frame@17423000 {
frame-number = <1>;
interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17423000 0x0 0x1000>;
+ reg = <0x17423000 0x1000>;
status = "disabled";
};
frame@17425000 {
frame-number = <2>;
interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17425000 0x0 0x1000>;
+ reg = <0x17425000 0x1000>;
status = "disabled";
};
frame@17427000 {
frame-number = <3>;
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17427000 0x0 0x1000>;
+ reg = <0x17427000 0x1000>;
status = "disabled";
};
frame@17429000 {
frame-number = <4>;
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x17429000 0x0 0x1000>;
+ reg = <0x17429000 0x1000>;
status = "disabled";
};
frame@1742b000 {
frame-number = <5>;
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x1742b000 0x0 0x1000>;
+ reg = <0x1742b000 0x1000>;
status = "disabled";
};
frame@1742d000 {
frame-number = <6>;
interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x0 0x1742d000 0x0 0x1000>;
+ reg = <0x1742d000 0x1000>;
status = "disabled";
};
};
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 40/53] ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (9 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 32/53] arm64: dts: qcom: timer should use only 32-bit size Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 41/53] arm64: dts: qcom: add missing AOSS QMP compatible fallback Sasha Levin
` (2 subsequent siblings)
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Manivannan Sadhasivam, Bjorn Andersson, Sasha Levin, agross,
robh+dt, krzysztof.kozlowski+dt, linux-arm-msm, devicetree
From: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
[ Upstream commit ae500b351ab0006d933d804a2b7507fe1e98cecc ]
The trigger type should be LEVEL_HIGH. So fix it!
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220530080842.37024-2-manivannan.sadhasivam@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm/boot/dts/qcom-sdx55.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom-sdx55.dtsi
index d455795da44c..b75e672c239d 100644
--- a/arch/arm/boot/dts/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom-sdx55.dtsi
@@ -206,7 +206,7 @@ gcc: clock-controller@100000 {
blsp1_uart3: serial@831000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0x00831000 0x200>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&gcc 30>,
<&gcc 9>;
clock-names = "core", "iface";
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 41/53] arm64: dts: qcom: add missing AOSS QMP compatible fallback
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (10 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 40/53] ARM: dts: qcom: sdx55: Fix the IRQ trigger type for UART Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 42/53] arm64: dts: qcom: ipq8074: fix NAND node name Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 43/53] arm64: dts: allwinner: a64: orangepi-win: Fix LED " Sasha Levin
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Krzysztof Kozlowski, Bjorn Andersson, Sasha Levin, agross,
robh+dt, krzysztof.kozlowski+dt, linux-arm-msm, devicetree
From: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[ Upstream commit 6ba93ba9f63fbc44c3a6af7fe6f2536d009cfd5a ]
The AOSS QMP bindings expect all compatibles to be followed by fallback
"qcom,aoss-qmp" because all of these are actually compatible with each
other. This fixes dtbs_check warnings like:
sm8250-hdk.dtb: power-controller@c300000: compatible: ['qcom,sm8250-aoss-qmp'] is too short
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220504131923.214367-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/sc7180.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sc7280.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8150.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8250.dtsi | 2 +-
arch/arm64/boot/dts/qcom/sm8350.dtsi | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index e9fb3c9a2d6e..120db2d0a309 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -3219,7 +3219,7 @@ aoss_reset: reset-controller@c2a0000 {
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sc7180-aoss-qmp";
+ compatible = "qcom,sc7180-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 8a4fd614d0a1..7925c8561117 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -3467,7 +3467,7 @@ aoss_reset: reset-controller@c2a0000 {
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sc7280-aoss-qmp";
+ compatible = "qcom,sc7280-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index d4f288edf3c9..6edb3986a473 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -3382,7 +3382,7 @@ camnoc_virt: interconnect@ac00000 {
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sm8150-aoss-qmp";
+ compatible = "qcom,sm8150-aoss-qmp", "qcom,aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x400>;
interrupts = <GIC_SPI 389 IRQ_TYPE_EDGE_RISING>;
mboxes = <&apss_shared 0>;
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index ed4e288c921f..1d62b2130e04 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -3475,7 +3475,7 @@ tsens1: thermal-sensor@c265000 {
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sm8250-aoss-qmp";
+ compatible = "qcom,sm8250-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP
IPCC_MPROC_SIGNAL_GLINK_QMP
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index d843a550314a..ee6c202ab68c 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1537,7 +1537,7 @@ tsens1: thermal-sensor@c265000 {
};
aoss_qmp: power-controller@c300000 {
- compatible = "qcom,sm8350-aoss-qmp";
+ compatible = "qcom,sm8350-aoss-qmp", "qcom,aoss-qmp";
reg = <0 0x0c300000 0 0x400>;
interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
IRQ_TYPE_EDGE_RISING>;
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 42/53] arm64: dts: qcom: ipq8074: fix NAND node name
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (11 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 41/53] arm64: dts: qcom: add missing AOSS QMP compatible fallback Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 43/53] arm64: dts: allwinner: a64: orangepi-win: Fix LED " Sasha Levin
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Robert Marko, Krzysztof Kozlowski, Bjorn Andersson, Sasha Levin,
agross, robh+dt, krzysztof.kozlowski+dt, linux-arm-msm,
devicetree
From: Robert Marko <robimarko@gmail.com>
[ Upstream commit b39961659ffc3c3a9e3d0d43b0476547b5f35d49 ]
Per schema it should be nand-controller@79b0000 instead of nand@79b0000.
Fix it to match nand-controller.yaml requirements.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220621120642.518575-1-robimarko@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/qcom/ipq8074.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index 8d4e0e193439..664fba3632b1 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -534,7 +534,7 @@ qpic_bam: dma-controller@7984000 {
status = "disabled";
};
- qpic_nand: nand@79b0000 {
+ qpic_nand: nand-controller@79b0000 {
compatible = "qcom,ipq8074-nand";
reg = <0x079b0000 0x10000>;
#address-cells = <1>;
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread* [PATCH AUTOSEL 5.18 43/53] arm64: dts: allwinner: a64: orangepi-win: Fix LED node name
[not found] <20220808013350.314757-1-sashal@kernel.org>
` (12 preceding siblings ...)
2022-08-08 1:33 ` [PATCH AUTOSEL 5.18 42/53] arm64: dts: qcom: ipq8074: fix NAND node name Sasha Levin
@ 2022-08-08 1:33 ` Sasha Levin
13 siblings, 0 replies; 14+ messages in thread
From: Sasha Levin @ 2022-08-08 1:33 UTC (permalink / raw)
To: linux-kernel, stable
Cc: Samuel Holland, Jernej Skrabec, Sasha Levin, robh+dt,
krzysztof.kozlowski+dt, wens, devicetree, linux-arm-kernel,
linux-sunxi
From: Samuel Holland <samuel@sholland.org>
[ Upstream commit b8eb2df19fbf97aa1e950cf491232c2e3bef8357 ]
"status" does not match any pattern in the gpio-leds binding. Rename the
node to the preferred pattern. This fixes a `make dtbs_check` error.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220702132816.46456-1-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
index c519d9fa6967..3d2c68d58f49 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-orangepi-win.dts
@@ -40,7 +40,7 @@ hdmi_con_in: endpoint {
leds {
compatible = "gpio-leds";
- status {
+ led-0 {
label = "orangepi:green:status";
gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */
};
--
2.35.1
^ permalink raw reply related [flat|nested] 14+ messages in thread