From: Frieder Schrempf <frieder@fris.de>
To: devicetree@vger.kernel.org,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Shawn Guo <shawnguo@kernel.org>
Cc: Frieder Schrempf <frieder.schrempf@kontron.de>,
Heiko Thiery <heiko.thiery@gmail.com>,
Fabio Estevam <festevam@gmail.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>,
NXP Linux Team <linux-imx@nxp.com>,
Pengutronix Kernel Team <kernel@pengutronix.de>
Subject: [PATCH v3 6/8] arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for PMIC regulator-names
Date: Mon, 15 Aug 2022 13:01:29 +0200 [thread overview]
Message-ID: <20220815110134.49683-7-frieder@fris.de> (raw)
In-Reply-To: <20220815110134.49683-1-frieder@fris.de>
From: Frieder Schrempf <frieder.schrempf@kontron.de>
Improve the naming of the regulators to contain the voltage rail
names from the schematic.
Suggested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Frieder Schrempf <frieder.schrempf@kontron.de>
---
Changes in v3:
* rebase on v6.0-rc1
Changes in v2:
* new patch
---
.../boot/dts/freescale/imx8mm-kontron-sl.dtsi | 22 +++++++++----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
index 96ecdce67059..ce9c27619e26 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-sl.dtsi
@@ -85,7 +85,7 @@ pca9450: pmic@25 {
regulators {
reg_vdd_soc: BUCK1 {
- regulator-name = "buck1";
+ regulator-name = "+0V8_VDD_SOC (BUCK1)";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <850000>;
regulator-boot-on;
@@ -96,7 +96,7 @@ reg_vdd_soc: BUCK1 {
};
reg_vdd_arm: BUCK2 {
- regulator-name = "buck2";
+ regulator-name = "+0V9_VDD_ARM (BUCK2)";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
@@ -107,7 +107,7 @@ reg_vdd_arm: BUCK2 {
};
reg_vdd_dram: BUCK3 {
- regulator-name = "buck3";
+ regulator-name = "+0V9_VDD_DRAM&PU (BUCK3)";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <950000>;
regulator-boot-on;
@@ -115,7 +115,7 @@ reg_vdd_dram: BUCK3 {
};
reg_vdd_3v3: BUCK4 {
- regulator-name = "buck4";
+ regulator-name = "+3V3 (BUCK4)";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-boot-on;
@@ -123,7 +123,7 @@ reg_vdd_3v3: BUCK4 {
};
reg_vdd_1v8: BUCK5 {
- regulator-name = "buck5";
+ regulator-name = "+1V8 (BUCK5)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -131,7 +131,7 @@ reg_vdd_1v8: BUCK5 {
};
reg_nvcc_dram: BUCK6 {
- regulator-name = "buck6";
+ regulator-name = "+1V1_NVCC_DRAM (BUCK6)";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-boot-on;
@@ -139,7 +139,7 @@ reg_nvcc_dram: BUCK6 {
};
reg_nvcc_snvs: LDO1 {
- regulator-name = "ldo1";
+ regulator-name = "+1V8_NVCC_SNVS (LDO1)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -147,7 +147,7 @@ reg_nvcc_snvs: LDO1 {
};
reg_vdd_snvs: LDO2 {
- regulator-name = "ldo2";
+ regulator-name = "+0V8_VDD_SNVS (LDO2)";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
@@ -155,7 +155,7 @@ reg_vdd_snvs: LDO2 {
};
reg_vdda: LDO3 {
- regulator-name = "ldo3";
+ regulator-name = "+1V8_VDDA (LDO3)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-boot-on;
@@ -163,7 +163,7 @@ reg_vdda: LDO3 {
};
reg_vdd_phy: LDO4 {
- regulator-name = "ldo4";
+ regulator-name = "+0V9_VDD_PHY (LDO4)";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <900000>;
regulator-boot-on;
@@ -171,7 +171,7 @@ reg_vdd_phy: LDO4 {
};
reg_nvcc_sd: LDO5 {
- regulator-name = "ldo5";
+ regulator-name = "NVCC_SD (LDO5)";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
};
--
2.37.1
next prev parent reply other threads:[~2022-08-15 11:04 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-15 11:01 [PATCH v3 0/8] arm64: dts: imx8mm-kontron: Improvements and OSM board support Frieder Schrempf
2022-08-15 11:01 ` [PATCH v3 1/8] dt-bindings: arm: fsl: Rename compatibles for Kontron i.MX8MM SoM/board Frieder Schrempf
2022-08-15 11:01 ` [PATCH v3 2/8] dt-bindings: arm: fsl: Add Kontron BL i.MX8MM OSM-S board Frieder Schrempf
2022-08-15 11:01 ` [PATCH v3 3/8] arm64: dts: imx8mm-kontron: Adjust compatibles, file names and model strings Frieder Schrempf
2022-08-15 11:01 ` [PATCH v3 4/8] arm64: dts: imx8mm-kontron: Use the VSELECT signal to switch SD card IO voltage Frieder Schrempf
2022-08-15 11:01 ` [PATCH v3 5/8] arm64: dts: imx8mm-kontron: Remove low DDRC operating point Frieder Schrempf
2022-08-15 11:01 ` Frieder Schrempf [this message]
2022-08-15 11:01 ` [PATCH v3 7/8] arm64: dts: imx8mm-kontron: Add SPI NOR partition layout Frieder Schrempf
2022-08-16 7:17 ` Krzysztof Kozlowski
2022-08-15 11:01 ` [PATCH v3 8/8] arm64: dts: Add support for Kontron SL/BL i.MX8MM OSM-S Frieder Schrempf
-- strict thread matches above, loose matches on Subject: below --
2022-08-22 8:00 [PATCH v3 0/8] arm64: dts: imx8mm-kontron: Improvements and OSM board support Frieder Schrempf
2022-08-22 8:00 ` [PATCH v3 6/8] arm64: dts: imx8mm-kontron: Use voltage rail names from schematic for PMIC regulator-names Frieder Schrempf
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220815110134.49683-7-frieder@fris.de \
--to=frieder@fris.de \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=frieder.schrempf@kontron.de \
--cc=heiko.thiery@gmail.com \
--cc=kernel@pengutronix.de \
--cc=krzysztof.kozlowski+dt@linaro.org \
--cc=krzysztof.kozlowski@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).