devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Kent Gustavsson <kent@minoris.se>,
	Lars-Peter Clausen <lars@metafoo.de>,
	Rob Herring <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register
Date: Sat, 20 Aug 2022 13:41:50 +0100	[thread overview]
Message-ID: <20220820134150.2b45339c@jic23-huawei> (raw)
In-Reply-To: <20220815061625.35568-5-marcus.folkesson@gmail.com>

On Mon, 15 Aug 2022 08:16:20 +0200
Marcus Folkesson <marcus.folkesson@gmail.com> wrote:

> Keep using managed resources as much as possible.
> 
> Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
> ---
>  drivers/iio/adc/mcp3911.c | 53 ++++++++++++---------------------------
>  1 file changed, 16 insertions(+), 37 deletions(-)
> 
> diff --git a/drivers/iio/adc/mcp3911.c b/drivers/iio/adc/mcp3911.c
> index 890af7dca62d..7e2efe702e57 100644
> --- a/drivers/iio/adc/mcp3911.c
> +++ b/drivers/iio/adc/mcp3911.c
> @@ -258,6 +258,13 @@ static int mcp3911_config(struct mcp3911 *adc)
>  	return  mcp3911_write(adc, MCP3911_REG_CONFIG, configreg, 2);
>  }
>  
> +static void mcp3911_cleanup_regulator(void *_adc)

Missed this on previous versions, but why not pass
the regulator pointer in as the parameter for the callback?

static void mcp391_cleanup_regulator(void *reg)
{
	regulator_disable(adc->vref);
}

Note this can't use the new devm_regulator_get_enable()
because we need access to the regulator within the driver.

I can tidy this up whilst applying (or given it's really minor I might
not bother :)

Note we are stalled at the moment with this series on getting the
fixes upstream.  I'll probably send that pull request shortly.

> +{
> +	struct mcp3911 *adc = _adc;
> +
> +	regulator_disable(adc->vref);
> +}
> +
>  static int mcp3911_probe(struct spi_device *spi)
>  {
>  	struct iio_dev *indio_dev;
> @@ -286,9 +293,14 @@ static int mcp3911_probe(struct spi_device *spi)
>  		ret = regulator_enable(adc->vref);
>  		if (ret)
>  			return ret;
> +
> +		ret = devm_add_action_or_reset(&spi->dev,
> +				mcp3911_cleanup_regulator, adc);
> +		if (ret)
> +			return ret;
>  	}
>  
> -	adc->clki = devm_clk_get(&adc->spi->dev, NULL);
> +	adc->clki = devm_clk_get_enabled(&adc->spi->dev, NULL);
>  	if (IS_ERR(adc->clki)) {
>  		if (PTR_ERR(adc->clki) == -ENOENT) {
>  			adc->clki = NULL;
> @@ -296,21 +308,13 @@ static int mcp3911_probe(struct spi_device *spi)
>  			dev_err(&adc->spi->dev,
>  				"failed to get adc clk (%ld)\n",
>  				PTR_ERR(adc->clki));
> -			ret = PTR_ERR(adc->clki);
> -			goto reg_disable;
> -		}
> -	} else {
> -		ret = clk_prepare_enable(adc->clki);
> -		if (ret < 0) {
> -			dev_err(&adc->spi->dev,
> -				"Failed to enable clki: %d\n", ret);
> -			goto reg_disable;
> +			return PTR_ERR(adc->clki);
>  		}
>  	}
>  
>  	ret = mcp3911_config(adc);
>  	if (ret)
> -		goto clk_disable;
> +		return ret;
>  
>  	indio_dev->name = spi_get_device_id(spi)->name;
>  	indio_dev->modes = INDIO_DIRECT_MODE;
> @@ -322,31 +326,7 @@ static int mcp3911_probe(struct spi_device *spi)
>  
>  	mutex_init(&adc->lock);
>  
> -	ret = iio_device_register(indio_dev);
> -	if (ret)
> -		goto clk_disable;
> -
> -	return ret;
> -
> -clk_disable:
> -	clk_disable_unprepare(adc->clki);
> -reg_disable:
> -	if (adc->vref)
> -		regulator_disable(adc->vref);
> -
> -	return ret;
> -}
> -
> -static void mcp3911_remove(struct spi_device *spi)
> -{
> -	struct iio_dev *indio_dev = spi_get_drvdata(spi);
> -	struct mcp3911 *adc = iio_priv(indio_dev);
> -
> -	iio_device_unregister(indio_dev);
> -
> -	clk_disable_unprepare(adc->clki);
> -	if (adc->vref)
> -		regulator_disable(adc->vref);
> +	return devm_iio_device_register(&adc->spi->dev, indio_dev);
>  }
>  
>  static const struct of_device_id mcp3911_dt_ids[] = {
> @@ -367,7 +347,6 @@ static struct spi_driver mcp3911_driver = {
>  		.of_match_table = mcp3911_dt_ids,
>  	},
>  	.probe = mcp3911_probe,
> -	.remove = mcp3911_remove,
>  	.id_table = mcp3911_id,
>  };
>  module_spi_driver(mcp3911_driver);


  reply	other threads:[~2022-08-20 12:31 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-08-15  6:16 [PATCH v6 0/9] Improve MCP3911 driver Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 1/9] iio: adc: mcp3911: make use of the sign bit Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 2/9] iio: adc: mcp3911: correct "microchip,device-addr" property Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 3/9] iio: adc: mcp3911: use correct formula for AD conversion Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 4/9] iio: adc: mcp3911: use resource-managed version of iio_device_register Marcus Folkesson
2022-08-20 12:41   ` Jonathan Cameron [this message]
2022-09-12 11:02     ` Marcus Folkesson
2022-09-19 15:36       ` Jonathan Cameron
2022-09-21 20:13         ` Jonathan Cameron
2022-08-15  6:16 ` [PATCH v6 5/9] iio: adc: mcp3911: add support for buffers Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 6/9] iio: adc: mcp3911: add support for interrupts Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 7/9] dt-bindings: iio: adc: mcp3911: add microchip,data-ready-hiz entry Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 8/9] iio: adc: mcp3911: add support for oversampling ratio Marcus Folkesson
2022-08-15  6:16 ` [PATCH v6 9/9] iio: adc: mcp3911: add support to set PGA Marcus Folkesson
2022-08-16 10:22 ` [PATCH v6 0/9] Improve MCP3911 driver Krzysztof Kozlowski
2022-08-16 14:57   ` Marcus Folkesson
2022-08-17  6:12     ` Krzysztof Kozlowski
2022-08-17 16:08 ` Marcus Folkesson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220820134150.2b45339c@jic23-huawei \
    --to=jic23@kernel.org \
    --cc=andy.shevchenko@gmail.com \
    --cc=devicetree@vger.kernel.org \
    --cc=kent@minoris.se \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=marcus.folkesson@gmail.com \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).