devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Shawn Guo <shawnguo@kernel.org>
To: "Peng Fan (OSS)" <peng.fan@oss.nxp.com>
Cc: robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org,
	s.hauer@pengutronix.de, l.stach@pengutronix.de,
	kernel@pengutronix.de, festevam@gmail.com, linux-imx@nxp.com,
	p.zabel@pengutronix.de, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org, aisheng.dong@nxp.com,
	Peng Fan <peng.fan@nxp.com>
Subject: Re: [PATCH V6 3/6] soc: imx: add i.MX93 SRC power domain driver
Date: Sun, 21 Aug 2022 10:49:19 +0800	[thread overview]
Message-ID: <20220821024919.GJ149610@dragon> (raw)
In-Reply-To: <20220719073541.197788-4-peng.fan@oss.nxp.com>

On Tue, Jul 19, 2022 at 03:35:38PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> Support controlling power domain managed by System Reset
> Controller(SRC). Current supported power domain is mediamix power
> domain.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
>  drivers/soc/imx/Kconfig     |   8 ++
>  drivers/soc/imx/Makefile    |   1 +
>  drivers/soc/imx/imx93-pd.c  | 163 ++++++++++++++++++++++++++++++++++++
>  drivers/soc/imx/imx93-src.c |  32 +++++++

Shouldn't a reset driver go to drivers/reset/?

>  4 files changed, 204 insertions(+)
>  create mode 100644 drivers/soc/imx/imx93-pd.c
>  create mode 100644 drivers/soc/imx/imx93-src.c
> 
> diff --git a/drivers/soc/imx/Kconfig b/drivers/soc/imx/Kconfig
> index a840494e849a..4b906791d6c7 100644
> --- a/drivers/soc/imx/Kconfig
> +++ b/drivers/soc/imx/Kconfig
> @@ -20,4 +20,12 @@ config SOC_IMX8M
>  	  support, it will provide the SoC info like SoC family,
>  	  ID and revision etc.
>  
> +config SOC_IMX9
> +	tristate "i.MX9 SoC family support"
> +	depends on ARCH_MXC || COMPILE_TEST
> +	default ARCH_MXC && ARM64
> +	select SOC_BUS
> +	help
> +	  If you say yes here, you get support for the NXP i.MX9 family
> +
>  endmenu
> diff --git a/drivers/soc/imx/Makefile b/drivers/soc/imx/Makefile
> index 63cd29f6d4d2..a0baa2a01adb 100644
> --- a/drivers/soc/imx/Makefile
> +++ b/drivers/soc/imx/Makefile
> @@ -7,3 +7,4 @@ obj-$(CONFIG_IMX_GPCV2_PM_DOMAINS) += gpcv2.o
>  obj-$(CONFIG_SOC_IMX8M) += soc-imx8m.o
>  obj-$(CONFIG_SOC_IMX8M) += imx8m-blk-ctrl.o
>  obj-$(CONFIG_SOC_IMX8M) += imx8mp-blk-ctrl.o
> +obj-$(CONFIG_SOC_IMX9) += imx93-src.o imx93-pd.o
> diff --git a/drivers/soc/imx/imx93-pd.c b/drivers/soc/imx/imx93-pd.c
> new file mode 100644
> index 000000000000..48437c303b78
> --- /dev/null
> +++ b/drivers/soc/imx/imx93-pd.c
> @@ -0,0 +1,163 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/of_device.h>
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_domain.h>
> +
> +#define MIX_SLICE_SW_CTRL_OFF		0x20
> +#define SLICE_SW_CTRL_PSW_CTRL_OFF_MASK	BIT(4)
> +#define SLICE_SW_CTRL_PDN_SOFT_MASK	BIT(31)
> +
> +#define MIX_FUNC_STAT_OFF		0xB4
> +
> +#define FUNC_STAT_PSW_STAT_MASK		BIT(0)
> +#define FUNC_STAT_RST_STAT_MASK		BIT(2)
> +#define FUNC_STAT_ISO_STAT_MASK		BIT(4)
> +
> +struct imx93_power_domain {
> +	struct generic_pm_domain genpd;
> +	struct device *dev;
> +	void __iomem *addr;
> +	struct clk_bulk_data *clks;
> +	int num_clks;
> +	bool init_off;
> +};
> +
> +#define to_imx93_pd(_genpd) container_of(_genpd, struct imx93_power_domain, genpd)
> +
> +static int imx93_pd_on(struct generic_pm_domain *genpd)
> +{
> +	struct imx93_power_domain *domain = to_imx93_pd(genpd);
> +	void __iomem *addr = domain->addr;
> +	u32 val;
> +	int ret;
> +
> +	ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
> +	if (ret) {
> +		dev_err(domain->dev, "failed to enable clocks for domain: %s\n", genpd->name);
> +		return ret;
> +	}
> +
> +	val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
> +	val &= ~SLICE_SW_CTRL_PDN_SOFT_MASK;
> +	writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
> +
> +	ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
> +				 !(val & FUNC_STAT_ISO_STAT_MASK), 1, 10000);
> +	if (ret) {
> +		dev_err(domain->dev, "pd_on timeout: name: %s, stat: %x\n", genpd->name, val);
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int imx93_pd_off(struct generic_pm_domain *genpd)
> +{
> +	struct imx93_power_domain *domain = to_imx93_pd(genpd);
> +	void __iomem *addr = domain->addr;
> +	int ret;
> +	u32 val;
> +
> +	/* Power off MIX */
> +	val = readl(addr + MIX_SLICE_SW_CTRL_OFF);
> +	val |= SLICE_SW_CTRL_PDN_SOFT_MASK;
> +	writel(val, addr + MIX_SLICE_SW_CTRL_OFF);
> +
> +	ret = readl_poll_timeout(addr + MIX_FUNC_STAT_OFF, val,
> +				 val & FUNC_STAT_PSW_STAT_MASK, 1, 1000);
> +	if (ret) {
> +		dev_err(domain->dev, "pd_off timeout: name: %s, stat: %x\n", genpd->name, val);
> +		return ret;
> +	}
> +
> +	clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +
> +	return 0;
> +};
> +
> +static int imx93_pd_remove(struct platform_device *pdev)
> +{
> +	struct imx93_power_domain *domain = platform_get_drvdata(pdev);
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +
> +	if (!domain->init_off)
> +		clk_bulk_disable_unprepare(domain->num_clks, domain->clks);
> +
> +	of_genpd_del_provider(np);
> +	pm_genpd_remove(&domain->genpd);
> +
> +	return 0;
> +}
> +
> +static int imx93_pd_probe(struct platform_device *pdev)
> +{
> +	struct device *dev = &pdev->dev;
> +	struct device_node *np = dev->of_node;
> +	struct imx93_power_domain *domain;
> +	int ret;
> +
> +	domain = devm_kzalloc(dev, sizeof(*domain), GFP_KERNEL);
> +	if (!domain)
> +		return -ENOMEM;

Have a newline.

> +	domain->addr = devm_platform_ioremap_resource(pdev, 0);
> +	if (IS_ERR(domain->addr))
> +		return PTR_ERR(domain->addr);
> +
> +

One newline is enough.

> +	domain->num_clks = devm_clk_bulk_get_all(dev, &domain->clks);
> +	if (domain->num_clks < 0)
> +		return dev_err_probe(dev, domain->num_clks, "Failed to get domain's clocks\n");
> +
> +	domain->genpd.name = dev_name(dev);
> +	domain->genpd.power_off = imx93_pd_off;
> +	domain->genpd.power_on = imx93_pd_on;
> +	domain->dev = dev;
> +
> +	domain->init_off = readl(domain->addr + MIX_FUNC_STAT_OFF) & FUNC_STAT_ISO_STAT_MASK;
> +	/* Just to sync the status of hardware */
> +	if (!domain->init_off) {
> +		ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
> +		if (ret) {
> +			dev_err(domain->dev, "failed to enable clocks for domain: %s\n",
> +				domain->genpd.name);
> +			return 0;

This is a case of success?

> +		}
> +	}
> +
> +	ret = pm_genpd_init(&domain->genpd, NULL, domain->init_off);
> +	if (ret)
> +		return ret;
> +
> +	platform_set_drvdata(pdev, domain);
> +
> +	return of_genpd_add_provider_simple(np, &domain->genpd);
> +}
> +
> +static const struct of_device_id imx93_dt_ids[] = {
> +	{ .compatible = "fsl,imx93-src-slice" },
> +	{ }
> +};

MODULE_DEVICE_TABLE()?

Shawn

> +
> +static struct platform_driver imx93_power_domain_driver = {
> +	.driver = {
> +		.name	= "imx93_power_domain",
> +		.owner	= THIS_MODULE,
> +		.of_match_table = imx93_dt_ids,
> +	},
> +	.probe = imx93_pd_probe,
> +	.remove = imx93_pd_remove,
> +};
> +module_platform_driver(imx93_power_domain_driver);
> +
> +MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
> +MODULE_DESCRIPTION("NXP i.MX93 power domain driver");
> +MODULE_LICENSE("GPL");

"GPL v2" since you have "SPDX-License-Identifier: GPL-2.0" claimed in
the beginning?

Shawn

> diff --git a/drivers/soc/imx/imx93-src.c b/drivers/soc/imx/imx93-src.c
> new file mode 100644
> index 000000000000..6f14c241538e
> --- /dev/null
> +++ b/drivers/soc/imx/imx93-src.c
> @@ -0,0 +1,32 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright 2022 NXP
> + */
> +
> +#include <linux/module.h>
> +#include <linux/of_platform.h>
> +#include <linux/platform_device.h>
> +
> +static int imx93_src_probe(struct platform_device *pdev)
> +{
> +	return devm_of_platform_populate(&pdev->dev);
> +}
> +
> +static const struct of_device_id imx93_dt_ids[] = {
> +	{ .compatible = "fsl,imx93-src" },
> +	{ }
> +};
> +
> +static struct platform_driver imx93_src_driver = {
> +	.driver = {
> +		.name	= "imx93_src",
> +		.owner	= THIS_MODULE,
> +		.of_match_table = imx93_dt_ids,
> +	},
> +	.probe = imx93_src_probe,
> +};
> +module_platform_driver(imx93_src_driver);
> +
> +MODULE_AUTHOR("Peng Fan <peng.fan@nxp.com>");
> +MODULE_DESCRIPTION("NXP i.MX93 src driver");
> +MODULE_LICENSE("GPL");
> -- 
> 2.25.1
> 

  reply	other threads:[~2022-08-21  2:49 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-07-19  7:35 [PATCH V6 0/6] imx: support i.MX93 SRC and mediamix blk ctrl Peng Fan (OSS)
2022-07-19  7:35 ` [PATCH V6 1/6] dt-bindings: soc: add i.MX93 SRC Peng Fan (OSS)
2022-07-22  0:28   ` Rob Herring
2022-07-19  7:35 ` [PATCH V6 2/6] dt-bindings: soc: add i.MX93 mediamix blk ctrl Peng Fan (OSS)
2022-07-19  7:35 ` [PATCH V6 3/6] soc: imx: add i.MX93 SRC power domain driver Peng Fan (OSS)
2022-08-21  2:49   ` Shawn Guo [this message]
2022-08-22  3:30     ` Peng Fan
2022-07-19  7:35 ` [PATCH V6 4/6] soc: imx: add i.MX93 media blk ctrl driver Peng Fan (OSS)
2022-08-21  3:15   ` Shawn Guo
2022-07-19  7:35 ` [PATCH V6 5/6] arm64: dts: imx93: add src node Peng Fan (OSS)
2022-07-19  7:35 ` [PATCH V6 6/6] arm64: dts: imx93: add mediamix blk ctrl node Peng Fan (OSS)

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220821024919.GJ149610@dragon \
    --to=shawnguo@kernel.org \
    --cc=aisheng.dong@nxp.com \
    --cc=devicetree@vger.kernel.org \
    --cc=festevam@gmail.com \
    --cc=kernel@pengutronix.de \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=l.stach@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-imx@nxp.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=p.zabel@pengutronix.de \
    --cc=peng.fan@nxp.com \
    --cc=peng.fan@oss.nxp.com \
    --cc=robh+dt@kernel.org \
    --cc=s.hauer@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).