From: Eliav Farber <farbere@amazon.com>
To: <jdelvare@suse.com>, <linux@roeck-us.net>, <robh+dt@kernel.org>,
<p.zabel@pengutronix.de>, <rtanwar@maxlinear.com>,
<linux-hwmon@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <farbere@amazon.com>, <talel@amazon.com>, <hhhawa@amazon.com>,
<jonnyc@amazon.com>, <hanochu@amazon.com>, <ronenk@amazon.com>,
<itamark@amazon.com>, <shellykz@amazon.com>, <shorer@amazon.com>,
<amitlavi@amazon.com>, <almogbs@amazon.com>, <dkl@amazon.com>,
<rahul.tanwar@linux.intel.com>, <andriy.shevchenko@intel.com>
Subject: [PATCH v3 09/19] hwmon: (mr75203) add VM active channel support
Date: Tue, 30 Aug 2022 19:22:02 +0000 [thread overview]
Message-ID: <20220830192212.28570-10-farbere@amazon.com> (raw)
In-Reply-To: <20220830192212.28570-1-farbere@amazon.com>
Add active channel support per voltage monitor.
The number of active channels is read from the device-tree.
When absent in device-tree, all channels are assumed to be used.
This shall be useful to expose sysfs only for inputs that are connected
to a voltage source.
Setting number of active channels to 0, means that entire VM sensor is
not used.
Signed-off-by: Eliav Farber <farbere@amazon.com>
---
V3 -> V2:
- Refactor the code changes (move code to a new function and group
parameters in dedicated structure).
V2 -> V1:
- Fix compilation error for patch 08/16:
"warning: ISO C90 forbids variable length array"
drivers/hwmon/mr75203.c | 107 ++++++++++++++++++++++++++++++++--------
1 file changed, 86 insertions(+), 21 deletions(-)
diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index f561806c400d..6925e8490587 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -29,6 +29,8 @@
#define CH_NUM_MSK GENMASK(31, 24)
#define CH_NUM_SFT 24
+#define VM_NUM_MAX (VM_NUM_MSK >> VM_NUM_SFT)
+
/* Macro Common Register */
#define CLK_SYNTH 0x00
#define CLK_SYNTH_LO_SFT 0
@@ -106,6 +108,16 @@
#define PVT_N_CONST 90
#define PVT_R_CONST 245805
+struct voltage_device {
+ u32 vm_map; /* Map channel number to VM index */
+ u32 ch_map; /* Map channel number to channel index */
+};
+
+struct voltage_channels {
+ u32 total; /* Total number of channels in all VMs */
+ u8 max; /* Maximum number of channels among all VMs */
+};
+
struct pvt_device {
struct regmap *c_map;
struct regmap *t_map;
@@ -113,12 +125,12 @@ struct pvt_device {
struct regmap *v_map;
struct clk *clk;
struct reset_control *rst;
+ struct voltage_device *vd;
+ struct voltage_channels vm_channels;
u32 t_num;
u32 p_num;
u32 v_num;
- u32 c_num;
u32 ip_freq;
- u8 *vm_idx;
};
static umode_t pvt_is_visible(const void *data, enum hwmon_sensor_types type,
@@ -184,11 +196,11 @@ static int pvt_read_in(struct device *dev, u32 attr, int channel, long *val)
u8 vm_idx, ch_idx;
int ret;
- if (channel >= pvt->v_num * pvt->c_num)
+ if (channel >= pvt->vm_channels.total)
return -EINVAL;
- vm_idx = pvt->vm_idx[channel / pvt->c_num];
- ch_idx = channel % pvt->c_num;
+ vm_idx = pvt->vd[channel].vm_map;
+ ch_idx = pvt->vd[channel].ch_map;
switch (attr) {
case hwmon_in_input:
@@ -388,7 +400,7 @@ static int pvt_init(struct pvt_device *pvt)
if (ret)
return ret;
- val = GENMASK(pvt->c_num - 1, 0) | VM_CH_INIT |
+ val = GENMASK(pvt->vm_channels.max - 1, 0) | VM_CH_INIT |
IP_POLL << SDIF_ADDR_SFT |
SDIF_WRN_W | SDIF_PROG;
ret = regmap_write(v_map, SDIF_W, val);
@@ -514,6 +526,62 @@ static int pvt_reset_control_deassert(struct device *dev, struct pvt_device *pvt
return devm_add_action_or_reset(dev, pvt_reset_control_assert, pvt);
}
+static int pvt_get_active_channel(struct device *dev, struct pvt_device *pvt,
+ u32 vm_num, u32 ch_num, u8 *vm_idx)
+{
+ u8 vm_active_ch[VM_NUM_MAX];
+ int ret, i, j, k;
+
+ ret = device_property_read_u8_array(dev, "moortec,vm-active-channels",
+ vm_active_ch, vm_num);
+ if (ret) {
+ /*
+ * Incase vm-active-channels property is not defined,
+ * we assume each VM sensor has all of its channels
+ * active.
+ */
+ for (i = 0; i < vm_num; i++)
+ vm_active_ch[i] = ch_num;
+
+ pvt->vm_channels.max = ch_num;
+ pvt->vm_channels.total = ch_num * vm_num;
+ } else {
+ for (i = 0; i < vm_num; i++) {
+ if (vm_active_ch[i] > ch_num) {
+ dev_err(dev, "invalid active channels: %u\n",
+ vm_active_ch[i]);
+ return -EINVAL;
+ }
+
+ pvt->vm_channels.total += vm_active_ch[i];
+
+ if (vm_active_ch[i] > pvt->vm_channels.max)
+ pvt->vm_channels.max = vm_active_ch[i];
+ }
+ }
+
+ /*
+ * Map between the channel-number to VM-index and channel-index.
+ * Example - 3 VMs, vm_active_ch = [05 02 04]:
+ * vm_map = [0 0 0 0 0 1 1 2 2 2 2]
+ * ch_map = [0 1 2 3 4 0 1 0 1 2 3]
+ */
+ pvt->vd = devm_kcalloc(dev, pvt->vm_channels.total, sizeof(*pvt->vd),
+ GFP_KERNEL);
+ if (!pvt->vd)
+ return -ENOMEM;
+
+ k = 0;
+ for (i = 0; i < vm_num; i++)
+ for (j = 0; j < vm_active_ch[i]; j++) {
+ pvt->vd[k].vm_map = vm_idx[i];
+ pvt->vd[k].ch_map = j;
+ k++;
+ }
+
+ return 0;
+}
+
static int mr75203_probe(struct platform_device *pdev)
{
const struct hwmon_channel_info **pvt_info;
@@ -565,7 +633,6 @@ static int mr75203_probe(struct platform_device *pdev)
pvt->t_num = ts_num;
pvt->p_num = pd_num;
pvt->v_num = vm_num;
- pvt->c_num = ch_num;
val = 0;
if (ts_num)
val++;
@@ -602,43 +669,41 @@ static int mr75203_probe(struct platform_device *pdev)
}
if (vm_num) {
- u32 total_ch = ch_num * vm_num;
+ u8 vm_idx[VM_NUM_MAX];
ret = pvt_get_regmap(pdev, "vm", pvt);
if (ret)
return ret;
- pvt->vm_idx = devm_kcalloc(dev, vm_num, sizeof(*pvt->vm_idx),
- GFP_KERNEL);
- if (!pvt->vm_idx)
- return -ENOMEM;
-
- ret = device_property_read_u8_array(dev, "intel,vm-map",
- pvt->vm_idx, vm_num);
+ ret = device_property_read_u8_array(dev, "intel,vm-map", vm_idx,
+ vm_num);
if (ret) {
/*
* Incase intel,vm-map property is not defined, we
* assume incremental channel numbers.
*/
for (i = 0; i < vm_num; i++)
- pvt->vm_idx[i] = i;
+ vm_idx[i] = i;
} else {
for (i = 0; i < vm_num; i++)
- if (pvt->vm_idx[i] >= vm_num ||
- pvt->vm_idx[i] == 0xff)
+ if (vm_idx[i] >= vm_num || vm_idx[i] == 0xff)
break;
vm_num = i;
pvt->v_num = i;
}
- in_config = devm_kcalloc(dev, total_ch + 1,
+ ret = pvt_get_active_channel(dev, pvt, vm_num, ch_num, vm_idx);
+ if (ret)
+ return ret;
+
+ in_config = devm_kcalloc(dev, pvt->vm_channels.total + 1,
sizeof(*in_config), GFP_KERNEL);
if (!in_config)
return -ENOMEM;
- memset32(in_config, HWMON_I_INPUT, total_ch);
- in_config[total_ch] = 0;
+ memset32(in_config, HWMON_I_INPUT, pvt->vm_channels.total);
+ in_config[pvt->vm_channels.total] = 0;
pvt_in.config = in_config;
pvt_info[index++] = &pvt_in;
--
2.37.1
next prev parent reply other threads:[~2022-08-30 19:23 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-30 19:21 [PATCH v3 00/19] Variety of fixes and new features for mr75203 driver Eliav Farber
2022-08-30 19:21 ` [PATCH v3 01/19] dt-bindings: hwmon: (mr75203) update "intel,vm-map" property to be optional Eliav Farber
2022-09-02 19:50 ` Rob Herring
2022-08-30 19:21 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined Eliav Farber
2022-08-31 2:39 ` Guenter Roeck
2022-08-31 4:36 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel, vm-map" " Farber, Eliav
2022-08-31 5:36 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" " Guenter Roeck
2022-08-31 5:49 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel, vm-map" " Farber, Eliav
2022-08-31 6:09 ` Farber, Eliav
2022-08-31 11:48 ` Guenter Roeck
2022-09-01 8:39 ` Farber, Eliav
2022-09-01 14:44 ` Guenter Roeck
2022-09-01 15:24 ` Farber, Eliav
2022-09-01 17:11 ` Guenter Roeck
2022-09-01 18:36 ` Farber, Eliav
2022-09-01 19:25 ` Guenter Roeck
2022-09-01 19:49 ` Andy Shevchenko
2022-08-31 9:38 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" " Andy Shevchenko
2022-09-02 12:08 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel, vm-map" " Farber, Eliav
2022-09-02 14:15 ` Andy Shevchenko
2022-08-30 19:21 ` [PATCH v3 03/19] hwmon: (mr75203) update pvt->v_num to the actual number of used sensors Eliav Farber
2022-08-31 2:41 ` Guenter Roeck
2022-08-31 4:50 ` Farber, Eliav
2022-08-31 5:31 ` Guenter Roeck
2022-08-30 19:21 ` [PATCH v3 04/19] dt-bindings: hwmon: (mr75203) change "reset" property to be optional Eliav Farber
2022-08-31 8:21 ` Philipp Zabel
2022-08-31 9:43 ` Farber, Eliav
2022-08-31 9:48 ` Philipp Zabel
2022-09-02 19:51 ` Rob Herring
2022-09-03 19:16 ` Farber, Eliav
2022-08-30 19:21 ` [PATCH v3 05/19] hwmon: (mr75203) skip reset-control deassert for SOCs that don't support it Eliav Farber
2022-08-31 8:19 ` Philipp Zabel
2022-08-30 19:21 ` [PATCH v3 06/19] hwmon: (mr75203) fix multi-channel voltage reading Eliav Farber
2022-08-31 9:46 ` Andy Shevchenko
2022-09-01 13:12 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 07/19] hwmon: (mr75203) enable polling for all VM channels Eliav Farber
2022-08-31 11:21 ` Andy Shevchenko
2022-08-31 11:55 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 08/19] dt-bindings: hwmon: (mr75203) add "moortec,vm-active-channels" property Eliav Farber
2022-08-31 11:39 ` Rob Herring
[not found] ` <a8557b5a-6e27-2e66-161e-814fc0f69c1d@amazon.com>
2022-08-31 12:17 ` [PATCH v3 08/19] dt-bindings: hwmon: (mr75203) add "moortec, vm-active-channels" property Rob Herring
2022-08-31 17:47 ` Farber, Eliav
2022-08-31 19:19 ` Rob Herring
2022-08-31 19:55 ` Farber, Eliav
2022-08-30 19:22 ` Eliav Farber [this message]
2022-08-31 11:48 ` [PATCH v3 09/19] hwmon: (mr75203) add VM active channel support Andy Shevchenko
2022-09-02 12:04 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 10/19] dt-bindings: hwmon: (mr75203) add "moortec,vm-pre-scaler" property Eliav Farber
2022-09-02 19:57 ` Rob Herring
2022-09-03 19:34 ` [PATCH v3 10/19] dt-bindings: hwmon: (mr75203) add "moortec, vm-pre-scaler" property Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 11/19] hwmon: (mr75203) add VM pre-scaler support Eliav Farber
2022-08-31 12:02 ` Andy Shevchenko
2022-09-01 14:17 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 12/19] hwmon: (mr75203) fix voltage equation for negative source input Eliav Farber
2022-08-31 12:04 ` Andy Shevchenko
2022-09-01 12:47 ` Farber, Eliav
2022-09-01 20:08 ` Andy Shevchenko
2022-08-30 19:22 ` [PATCH v3 13/19] hwmon: (mr75203) modify the temperature equation according to series 5 datasheet Eliav Farber
2022-08-31 12:06 ` Andy Shevchenko
2022-09-01 12:22 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 14/19] dt-bindings: hwmon: (mr75203) add "moortec,ts-series" property Eliav Farber
2022-08-31 8:23 ` Philipp Zabel
2022-08-31 9:23 ` [PATCH v3 14/19] dt-bindings: hwmon: (mr75203) add "moortec, ts-series" property Farber, Eliav
2022-08-31 9:42 ` Philipp Zabel
2022-09-02 13:18 ` Farber, Eliav
2022-09-02 19:59 ` [PATCH v3 14/19] dt-bindings: hwmon: (mr75203) add "moortec,ts-series" property Rob Herring
2022-09-03 19:12 ` [PATCH v3 14/19] dt-bindings: hwmon: (mr75203) add "moortec, ts-series" property Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 15/19] hwmon: (mr75203) add support for series 6 temperature equation Eliav Farber
2022-08-31 12:08 ` Andy Shevchenko
2022-09-01 12:14 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 16/19] dt-bindings: hwmon: (mr75203) add coefficient properties for the thermal equation Eliav Farber
2022-09-02 20:03 ` Rob Herring
2022-09-03 19:16 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 17/19] hwmon: (mr75203) parse temperature coefficients from device-tree Eliav Farber
2022-08-31 12:11 ` Andy Shevchenko
2022-09-01 9:54 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 18/19] hwmon: (mr75203) add debugfs to read and write temperature coefficients Eliav Farber
2022-08-31 12:14 ` Andy Shevchenko
2022-09-01 6:54 ` Farber, Eliav
2022-09-01 14:28 ` Guenter Roeck
2022-09-01 19:46 ` Andy Shevchenko
2022-08-30 19:22 ` [PATCH v3 19/19] hwmon: (mr75203) fix coding style space errors Eliav Farber
2022-08-31 12:15 ` Andy Shevchenko
2022-09-01 14:21 ` Farber, Eliav
2022-09-01 14:46 ` Guenter Roeck
2022-09-01 15:31 ` Farber, Eliav
2022-09-01 17:09 ` Guenter Roeck
2022-09-01 18:40 ` Farber, Eliav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220830192212.28570-10-farbere@amazon.com \
--to=farbere@amazon.com \
--cc=almogbs@amazon.com \
--cc=amitlavi@amazon.com \
--cc=andriy.shevchenko@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dkl@amazon.com \
--cc=hanochu@amazon.com \
--cc=hhhawa@amazon.com \
--cc=itamark@amazon.com \
--cc=jdelvare@suse.com \
--cc=jonnyc@amazon.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=p.zabel@pengutronix.de \
--cc=rahul.tanwar@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=ronenk@amazon.com \
--cc=rtanwar@maxlinear.com \
--cc=shellykz@amazon.com \
--cc=shorer@amazon.com \
--cc=talel@amazon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).