[PATCH v3 16/19] dt-bindings: hwmon: (mr75203) add coefficient properties for the thermal equation

[Eliav Farber <farbere@amazon.com>]

Add optional temperature coefficient properties:
 *) moortec,ts-coeff-g
 *) moortec,ts-coeff-h
 *) moortec,ts-coeff-cal5
 *) moortec,ts-coeff-j
If defined they shall be used instead of defaults.

The coefficients were added to device tree on top of the series property
(which can be used to select between series 5 and series 6), because
coefficients can vary between product and product, and code defaults might
not be accurate enough.

Signed-off-by: Eliav Farber <farbere@amazon.com>
---
V3 -> V2:
- Add "moortec" prefix to property name.

 .../bindings/hwmon/moortec,mr75203.yaml       | 33 +++++++++++++++++++
 1 file changed, 33 insertions(+)

diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
index ec2dbe7da9c2..a92da6064285 100644
--- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
+++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
@@ -74,6 +74,37 @@ properties:
     default: 5
     $ref: /schemas/types.yaml#definitions/uint32
 
+  moortec,ts-coeff-g:
+    description:
+      G coefficient for temperature equation.
+      Value should be multiplied by factor 1000.
+      Default for series 5 = 60000
+      Default for series 6 = 57400
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-h:
+    description:
+      H coefficient for temperature equation.
+      Value should be multiplied by factor 1000.
+      Default for series 5 = 200000
+      Default for series 6 = 249400
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-cal5:
+    description:
+      cal5 coefficient for temperature equation (can't be 0).
+      Default for series 5 = 4094
+      Default for series 6 = 4096
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  moortec,ts-coeff-j:
+    description:
+      J coefficient for temperature equation.
+      Value should be multiplied by factor 1000.
+      Default for series 5 = -100
+      Default for series 6 = 0
+    $ref: /schemas/types.yaml#/definitions/int32
+
 required:
   - compatible
   - reg
@@ -97,5 +128,7 @@ examples:
         resets = <&rcu0 0x40 7>;
         moortec,vm-active-channels = <0x10 0x05>;
         moortec,vm-pre-scaler = <5 6>;
+        moortec,ts-coeff-g = <61400>;
+        moortec,ts-coeff-h = <253700>;
         #thermal-sensor-cells = <1>;
     };
-- 
2.37.1