From: Eliav Farber <farbere@amazon.com>
To: <jdelvare@suse.com>, <linux@roeck-us.net>, <robh+dt@kernel.org>,
<p.zabel@pengutronix.de>, <rtanwar@maxlinear.com>,
<linux-hwmon@vger.kernel.org>, <devicetree@vger.kernel.org>,
<linux-kernel@vger.kernel.org>
Cc: <farbere@amazon.com>, <talel@amazon.com>, <hhhawa@amazon.com>,
<jonnyc@amazon.com>, <hanochu@amazon.com>, <ronenk@amazon.com>,
<itamark@amazon.com>, <shellykz@amazon.com>, <shorer@amazon.com>,
<amitlavi@amazon.com>, <almogbs@amazon.com>, <dkl@amazon.com>,
<rahul.tanwar@linux.intel.com>, <andriy.shevchenko@intel.com>
Subject: [PATCH v3 18/19] hwmon: (mr75203) add debugfs to read and write temperature coefficients
Date: Tue, 30 Aug 2022 19:22:11 +0000 [thread overview]
Message-ID: <20220830192212.28570-19-farbere@amazon.com> (raw)
In-Reply-To: <20220830192212.28570-1-farbere@amazon.com>
This change adds debugfs to read and write temperature sensor coefficients
- g, h, j and cal5.
The coefficients can vary between product and product, so it can be very
useful to be able to modify them on the fly during the calibration
process.
e.g.:
cat /sys/kernel/debug/940f23d0000.pvt/ts_coeff_cal5
4096
echo 83000 > sys/kernel/debug/940f23d0000.pvt/ts_coeff_g
Signed-off-by: Eliav Farber <farbere@amazon.com>
---
drivers/hwmon/mr75203.c | 196 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 196 insertions(+)
diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index d9fc5d225868..8c30f0521452 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -9,6 +9,7 @@
*/
#include <linux/bits.h>
#include <linux/clk.h>
+#include <linux/debugfs.h>
#include <linux/hwmon.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
@@ -153,6 +154,7 @@ struct pvt_device {
struct regmap *v_map;
struct clk *clk;
struct reset_control *rst;
+ struct dentry *dbgfs_dir;
struct voltage_device *vd;
struct voltage_channels vm_channels;
struct temp_coeff ts_coeff;
@@ -162,6 +164,198 @@ struct pvt_device {
u32 ip_freq;
};
+static ssize_t pvt_ts_coeff_h_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ char buf[16];
+ unsigned int len;
+
+ len = sprintf(buf, "%u\n", pvt->ts_coeff.h);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t pvt_ts_coeff_h_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ int ret;
+ u32 coeff;
+
+ ret = kstrtou32_from_user(user_buf, count, 0, &coeff);
+ if (ret)
+ return ret;
+
+ pvt->ts_coeff.h = coeff;
+
+ return count;
+}
+
+static const struct file_operations pvt_ts_coeff_h_fops = {
+ .read = pvt_ts_coeff_h_read,
+ .write = pvt_ts_coeff_h_write,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t pvt_ts_coeff_g_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ char buf[16];
+ unsigned int len;
+
+ len = sprintf(buf, "%u\n", pvt->ts_coeff.g);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t pvt_ts_coeff_g_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ int ret;
+ u32 coeff;
+
+ ret = kstrtou32_from_user(user_buf, count, 0, &coeff);
+ if (ret)
+ return ret;
+
+ pvt->ts_coeff.g = coeff;
+
+ return count;
+}
+
+static const struct file_operations pvt_ts_coeff_g_fops = {
+ .read = pvt_ts_coeff_g_read,
+ .write = pvt_ts_coeff_g_write,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t pvt_ts_coeff_j_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ char buf[16];
+ unsigned int len;
+
+ len = sprintf(buf, "%d\n", pvt->ts_coeff.j);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t pvt_ts_coeff_j_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ int ret;
+ s32 coeff;
+
+ ret = kstrtos32_from_user(user_buf, count, 0, &coeff);
+ if (ret)
+ return ret;
+
+ pvt->ts_coeff.j = coeff;
+
+ return count;
+}
+
+static const struct file_operations pvt_ts_coeff_j_fops = {
+ .read = pvt_ts_coeff_j_read,
+ .write = pvt_ts_coeff_j_write,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static ssize_t pvt_ts_coeff_cal5_read(struct file *file,
+ char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ char buf[16];
+ unsigned int len;
+
+ len = sprintf(buf, "%u\n", pvt->ts_coeff.cal5);
+
+ return simple_read_from_buffer(user_buf, count, ppos, buf, len);
+}
+
+static ssize_t pvt_ts_coeff_cal5_write(struct file *file,
+ const char __user *user_buf,
+ size_t count, loff_t *ppos)
+{
+ struct pvt_device *pvt = file->private_data;
+ int ret;
+ u32 coeff;
+
+ ret = kstrtou32_from_user(user_buf, count, 0, &coeff);
+ if (ret)
+ return ret;
+
+ if (coeff == 0)
+ return -EINVAL;
+
+ pvt->ts_coeff.cal5 = coeff;
+
+ return count;
+}
+
+static const struct file_operations pvt_ts_coeff_cal5_fops = {
+ .read = pvt_ts_coeff_cal5_read,
+ .write = pvt_ts_coeff_cal5_write,
+ .open = simple_open,
+ .owner = THIS_MODULE,
+ .llseek = default_llseek,
+};
+
+static void devm_pvt_ts_dbgfs_remove(void *data)
+{
+ struct pvt_device *pvt = (struct pvt_device *)data;
+
+ debugfs_remove_recursive(pvt->dbgfs_dir);
+ pvt->dbgfs_dir = NULL;
+}
+
+static int pvt_ts_dbgfs_create(struct pvt_device *pvt, struct device *dev)
+{
+ int ret;
+
+ pvt->dbgfs_dir = debugfs_create_dir(dev_name(dev), NULL);
+ if (!pvt->dbgfs_dir) {
+ dev_err(dev, "Failed to create dbgfs_dir\n");
+ return -EINVAL;
+ }
+
+ debugfs_create_file("ts_coeff_h", 0644, pvt->dbgfs_dir, pvt,
+ &pvt_ts_coeff_h_fops);
+ debugfs_create_file("ts_coeff_g", 0644, pvt->dbgfs_dir, pvt,
+ &pvt_ts_coeff_g_fops);
+ debugfs_create_file("ts_coeff_j", 0644, pvt->dbgfs_dir, pvt,
+ &pvt_ts_coeff_j_fops);
+ debugfs_create_file("ts_coeff_cal5", 0644, pvt->dbgfs_dir, pvt,
+ &pvt_ts_coeff_cal5_fops);
+
+ ret = devm_add_action_or_reset(dev, devm_pvt_ts_dbgfs_remove, pvt);
+ if (ret) {
+ dev_err(dev, "failed to add action to remove pvt dbgfs (%d)\n",
+ ret);
+ return ret;
+ }
+
+ return 0;
+}
+
static umode_t pvt_is_visible(const void *data, enum hwmon_sensor_types type,
u32 attr, int channel)
{
@@ -814,6 +1008,8 @@ static int mr75203_probe(struct platform_device *pdev)
memset32(temp_config, HWMON_T_INPUT, ts_num);
pvt_temp.config = temp_config;
pvt_info[index++] = &pvt_temp;
+
+ pvt_ts_dbgfs_create(pvt, dev);
}
if (pd_num) {
--
2.37.1
next prev parent reply other threads:[~2022-08-30 19:23 UTC|newest]
Thread overview: 88+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-30 19:21 [PATCH v3 00/19] Variety of fixes and new features for mr75203 driver Eliav Farber
2022-08-30 19:21 ` [PATCH v3 01/19] dt-bindings: hwmon: (mr75203) update "intel,vm-map" property to be optional Eliav Farber
2022-09-02 19:50 ` Rob Herring
2022-08-30 19:21 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" not defined Eliav Farber
2022-08-31 2:39 ` Guenter Roeck
2022-08-31 4:36 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel, vm-map" " Farber, Eliav
2022-08-31 5:36 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" " Guenter Roeck
2022-08-31 5:49 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel, vm-map" " Farber, Eliav
2022-08-31 6:09 ` Farber, Eliav
2022-08-31 11:48 ` Guenter Roeck
2022-09-01 8:39 ` Farber, Eliav
2022-09-01 14:44 ` Guenter Roeck
2022-09-01 15:24 ` Farber, Eliav
2022-09-01 17:11 ` Guenter Roeck
2022-09-01 18:36 ` Farber, Eliav
2022-09-01 19:25 ` Guenter Roeck
2022-09-01 19:49 ` Andy Shevchenko
2022-08-31 9:38 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel,vm-map" " Andy Shevchenko
2022-09-02 12:08 ` [PATCH v3 02/19] hwmon: (mr75203) fix VM sensor allocation when "intel, vm-map" " Farber, Eliav
2022-09-02 14:15 ` Andy Shevchenko
2022-08-30 19:21 ` [PATCH v3 03/19] hwmon: (mr75203) update pvt->v_num to the actual number of used sensors Eliav Farber
2022-08-31 2:41 ` Guenter Roeck
2022-08-31 4:50 ` Farber, Eliav
2022-08-31 5:31 ` Guenter Roeck
2022-08-30 19:21 ` [PATCH v3 04/19] dt-bindings: hwmon: (mr75203) change "reset" property to be optional Eliav Farber
2022-08-31 8:21 ` Philipp Zabel
2022-08-31 9:43 ` Farber, Eliav
2022-08-31 9:48 ` Philipp Zabel
2022-09-02 19:51 ` Rob Herring
2022-09-03 19:16 ` Farber, Eliav
2022-08-30 19:21 ` [PATCH v3 05/19] hwmon: (mr75203) skip reset-control deassert for SOCs that don't support it Eliav Farber
2022-08-31 8:19 ` Philipp Zabel
2022-08-30 19:21 ` [PATCH v3 06/19] hwmon: (mr75203) fix multi-channel voltage reading Eliav Farber
2022-08-31 9:46 ` Andy Shevchenko
2022-09-01 13:12 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 07/19] hwmon: (mr75203) enable polling for all VM channels Eliav Farber
2022-08-31 11:21 ` Andy Shevchenko
2022-08-31 11:55 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 08/19] dt-bindings: hwmon: (mr75203) add "moortec,vm-active-channels" property Eliav Farber
2022-08-31 11:39 ` Rob Herring
[not found] ` <a8557b5a-6e27-2e66-161e-814fc0f69c1d@amazon.com>
2022-08-31 12:17 ` [PATCH v3 08/19] dt-bindings: hwmon: (mr75203) add "moortec, vm-active-channels" property Rob Herring
2022-08-31 17:47 ` Farber, Eliav
2022-08-31 19:19 ` Rob Herring
2022-08-31 19:55 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 09/19] hwmon: (mr75203) add VM active channel support Eliav Farber
2022-08-31 11:48 ` Andy Shevchenko
2022-09-02 12:04 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 10/19] dt-bindings: hwmon: (mr75203) add "moortec,vm-pre-scaler" property Eliav Farber
2022-09-02 19:57 ` Rob Herring
2022-09-03 19:34 ` [PATCH v3 10/19] dt-bindings: hwmon: (mr75203) add "moortec, vm-pre-scaler" property Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 11/19] hwmon: (mr75203) add VM pre-scaler support Eliav Farber
2022-08-31 12:02 ` Andy Shevchenko
2022-09-01 14:17 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 12/19] hwmon: (mr75203) fix voltage equation for negative source input Eliav Farber
2022-08-31 12:04 ` Andy Shevchenko
2022-09-01 12:47 ` Farber, Eliav
2022-09-01 20:08 ` Andy Shevchenko
2022-08-30 19:22 ` [PATCH v3 13/19] hwmon: (mr75203) modify the temperature equation according to series 5 datasheet Eliav Farber
2022-08-31 12:06 ` Andy Shevchenko
2022-09-01 12:22 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 14/19] dt-bindings: hwmon: (mr75203) add "moortec,ts-series" property Eliav Farber
2022-08-31 8:23 ` Philipp Zabel
2022-08-31 9:23 ` [PATCH v3 14/19] dt-bindings: hwmon: (mr75203) add "moortec, ts-series" property Farber, Eliav
2022-08-31 9:42 ` Philipp Zabel
2022-09-02 13:18 ` Farber, Eliav
2022-09-02 19:59 ` [PATCH v3 14/19] dt-bindings: hwmon: (mr75203) add "moortec,ts-series" property Rob Herring
2022-09-03 19:12 ` [PATCH v3 14/19] dt-bindings: hwmon: (mr75203) add "moortec, ts-series" property Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 15/19] hwmon: (mr75203) add support for series 6 temperature equation Eliav Farber
2022-08-31 12:08 ` Andy Shevchenko
2022-09-01 12:14 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 16/19] dt-bindings: hwmon: (mr75203) add coefficient properties for the thermal equation Eliav Farber
2022-09-02 20:03 ` Rob Herring
2022-09-03 19:16 ` Farber, Eliav
2022-08-30 19:22 ` [PATCH v3 17/19] hwmon: (mr75203) parse temperature coefficients from device-tree Eliav Farber
2022-08-31 12:11 ` Andy Shevchenko
2022-09-01 9:54 ` Farber, Eliav
2022-08-30 19:22 ` Eliav Farber [this message]
2022-08-31 12:14 ` [PATCH v3 18/19] hwmon: (mr75203) add debugfs to read and write temperature coefficients Andy Shevchenko
2022-09-01 6:54 ` Farber, Eliav
2022-09-01 14:28 ` Guenter Roeck
2022-09-01 19:46 ` Andy Shevchenko
2022-08-30 19:22 ` [PATCH v3 19/19] hwmon: (mr75203) fix coding style space errors Eliav Farber
2022-08-31 12:15 ` Andy Shevchenko
2022-09-01 14:21 ` Farber, Eliav
2022-09-01 14:46 ` Guenter Roeck
2022-09-01 15:31 ` Farber, Eliav
2022-09-01 17:09 ` Guenter Roeck
2022-09-01 18:40 ` Farber, Eliav
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220830192212.28570-19-farbere@amazon.com \
--to=farbere@amazon.com \
--cc=almogbs@amazon.com \
--cc=amitlavi@amazon.com \
--cc=andriy.shevchenko@intel.com \
--cc=devicetree@vger.kernel.org \
--cc=dkl@amazon.com \
--cc=hanochu@amazon.com \
--cc=hhhawa@amazon.com \
--cc=itamark@amazon.com \
--cc=jdelvare@suse.com \
--cc=jonnyc@amazon.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=p.zabel@pengutronix.de \
--cc=rahul.tanwar@linux.intel.com \
--cc=robh+dt@kernel.org \
--cc=ronenk@amazon.com \
--cc=rtanwar@maxlinear.com \
--cc=shellykz@amazon.com \
--cc=shorer@amazon.com \
--cc=talel@amazon.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).