Re: [PATCH 0/4] Add support for Toshiba TC358746

[Marco Felsch <m.felsch@pengutronix.de>]

Hi,

gentle ping on this series.

On 22-08-18, Marco Felsch wrote:
> Hi,
> 
> this small series adds the support for the Toshiba TC358746 MIPI-CSI to
> Parallel converter chip. After a long period I finally had the time to
> include Sakaris points made on my v2 [1]. Since [1] is long time ago
> and I reworked the driver a lot, I don't add a v3 on this series. Also
> all already provided RB tags are dropped.
> 
> Regards,
>   Marco
> 
> [1] https://www.mail-archive.com/linux-media@vger.kernel.org/msg147901.html
> 
> Marco Felsch (4):
>   phy: dphy: refactor get_default_config
>   phy: dphy: add support to calculate the timing based on hs_clk_rate
>   media: dt-bindings: add bindings for Toshiba TC358746
>   media: tc358746: add Toshiba TC358746 Parallel to CSI-2 bridge driver
> 
>  .../bindings/media/i2c/toshiba,tc358746.yaml  |  157 ++
>  drivers/media/i2c/Kconfig                     |   17 +
>  drivers/media/i2c/Makefile                    |    1 +
>  drivers/media/i2c/tc358746.c                  | 1645 +++++++++++++++++
>  drivers/phy/phy-core-mipi-dphy.c              |   31 +-
>  include/linux/phy/phy-mipi-dphy.h             |    3 +
>  6 files changed, 1850 insertions(+), 4 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/media/i2c/toshiba,tc358746.yaml
>  create mode 100644 drivers/media/i2c/tc358746.c
> 
> -- 
> 2.30.2
> 
> 
>