Re: [PATCH v3 10/19] dt-bindings: hwmon: (mr75203) add "moortec,vm-pre-scaler" property

[Rob Herring <robh@kernel.org>]

On Tue, Aug 30, 2022 at 07:22:03PM +0000, Eliav Farber wrote:
> Add support for mr76006 pre-scaler which provides divide-by-2 scaling of
> input voltage, which can then be presented for VM for measurement within
> its range (the VM input range is limited to -0.1V to 1V).
> 
> The new "moortec,vm-pre-scaler" property lists the channels that use a
> pre-scaler.
> 
> The driver will use this list to multiply the voltage result by 2, to
> present to the user the actual voltage input source.
> 
> Signed-off-by: Eliav Farber <farbere@amazon.com>
> ---
> V3 -> V2:
> - Add "moortec" prefix to property name.
> - Change property format to be a single u8 array.
> - Fix typo: scalar --> scaler.
> 
>  .../devicetree/bindings/hwmon/moortec,mr75203.yaml    | 11 +++++++++++
>  1 file changed, 11 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> index 69cc6caceb2c..4c983d8f8fe7 100644
> --- a/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> +++ b/Documentation/devicetree/bindings/hwmon/moortec,mr75203.yaml
> @@ -54,6 +54,16 @@ properties:
>      default: 16
>      $ref: /schemas/types.yaml#definitions/uint8-array
>  
> +  moortec,vm-pre-scaler:
> +    description:
> +      moortec,vm-pre-scaler property is an array of channels that use a mr76006
> +      pre-scaler to divides the input source by 2.

to divide the

You don't need the property name in the description. The entries are the 
pre-scaler values for each channel? The array index is the channel? If 
so, then 'an array of pre-scaler values for each channel ...'.

> +      The pre-scaler is used for input sources that exceed the VM input range.
> +      The driver uses this information to present to the user the actual value
> +      of the voltage source.
> +    default: 1

It's an array, so a scalar default doesn't make sense.

> +    $ref: /schemas/types.yaml#definitions/uint8-array

Constraints? I assume there's a finite number of channels to set the 
array size bounds for example.

> +
>  required:
>    - compatible
>    - reg
> @@ -76,5 +86,6 @@ examples:
>          clocks = <&osc0>;
>          resets = <&rcu0 0x40 7>;
>          moortec,vm-active-channels = <0x10 0x05>;
> +        moortec,vm-pre-scaler = <5 6>;
>          #thermal-sensor-cells = <1>;
>      };
> -- 
> 2.37.1
> 
>