Re: [PATCH V5 0/8] imx: add i.MX8MP hdmi blk ctrl hdcp/hrv and vpu blk ctrl

[Shawn Guo <shawnguo@kernel.org>]

On Mon, Aug 22, 2022 at 02:45:28PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan@nxp.com>
> 
> V5:
>  Add R-b for dt-bindings
>  Tune order of vpu blk ctrl node per unit address
>  Update commit log of patch 5.
>    - Per HRV, this should be detailed explained in HDMI HRV driver, so here
>    I only say HRV_MWR(HDMI RX Video Memory Write Master for RX validation).
> 
> V4:
>  Add R-b for patch 2
>  Add a new patch 3 to introduce interconnect property for i.MX8MM VPU blk ctrl,
>  same to other properties, i.MX8MM/P could use their own names in patch 4
> 
> V3:
>  Per DT maitainer, add a new patch to clean up minItems, see patch 2
> 
> V2:
>  - Add A-b from DT maintainer for patch 1
>  - Per DT maintainer, I added description for items. To
>  make it consistent, I also added description to i.MX8MM.
>  - Per Adam, change VPU H1/h1 to VC8000E/vc8000e in the patchset.
> 
> This patchset is to add more blk ctrl support for i.MX8MP
>  - Add HDMI HDCP/HRV BLK CTRL support
>  - Add VPU BLK CTRL support
>  - Add PGC VPU node which supplies power domain for VPU BLK
> 
> Peng Fan (8):
>   dt-bindings: power: imx8mp-power: add HDMI HDCP/HRV
>   dt-bindings: soc: imx: drop minItems for i.MX8MM vpu blk ctrl
>   dt-bindings: soc: imx: add interconnect property for i.MX8MM vpu blk
>     ctrl
>   dt-bindings: soc: imx: add i.MX8MP vpu blk ctrl
>   soc: imx: add i.MX8MP HDMI blk ctrl HDCP/HRV_MWR
>   soc: imx: imx8m-blk-ctrl: add i.MX8MP VPU blk ctrl
>   arm64: dts: imx8mp: add vpu pgc nodes
>   arm64: dts: imx8mp: add VPU blk ctrl node

Applied all, thanks!