From: Shawn Guo <shawnguo@kernel.org>
To: Li Yang <leoyang.li@nxp.com>
Cc: devicetree@vger.kernel.org, robh+dt@kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Zhang Ying <ying.zhang22455@nxp.com>
Subject: Re: [PATCH 7/9] arm64: dts: ls1046a: add gpios based i2c recovery information
Date: Mon, 5 Sep 2022 09:12:27 +0800 [thread overview]
Message-ID: <20220905011227.GS1728671@dragon> (raw)
In-Reply-To: <20220824231200.494-8-leoyang.li@nxp.com>
On Wed, Aug 24, 2022 at 06:11:58PM -0500, Li Yang wrote:
> Add scl-gpios property for i2c recovery and add SoC specific compatible
> string for SoC specific fixup.
>
> Signed-off-by: Zhang Ying <ying.zhang22455@nxp.com>
> Signed-off-by: Li Yang <leoyang.li@nxp.com>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 11 +++++++----
> 1 file changed, 7 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> index c7c6c82626fd..c95a990e2edd 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
> @@ -502,7 +502,7 @@ dspi: spi@2100000 {
> };
>
> i2c0: i2c@2180000 {
> - compatible = "fsl,vf610-i2c";
> + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2180000 0x0 0x10000>;
> @@ -516,35 +516,38 @@ i2c0: i2c@2180000 {
> };
>
> i2c1: i2c@2190000 {
> - compatible = "fsl,vf610-i2c";
> + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x2190000 0x0 0x10000>;
> interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + scl-gpios = <&gpio3 2 0>;
Use define for polarity cell?
Shawn
> status = "disabled";
> };
>
> i2c2: i2c@21a0000 {
> - compatible = "fsl,vf610-i2c";
> + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x21a0000 0x0 0x10000>;
> interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + scl-gpios = <&gpio3 10 0>;
> status = "disabled";
> };
>
> i2c3: i2c@21b0000 {
> - compatible = "fsl,vf610-i2c";
> + compatible = "fsl,ls1046a-i2c", "fsl,vf610-i2c";
> #address-cells = <1>;
> #size-cells = <0>;
> reg = <0x0 0x21b0000 0x0 0x10000>;
> interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> clocks = <&clockgen QORIQ_CLK_PLATFORM_PLL
> QORIQ_CLK_PLL_DIV(2)>;
> + scl-gpios = <&gpio3 12 0>;
> status = "disabled";
> };
>
> --
> 2.37.1
>
next prev parent reply other threads:[~2022-09-05 1:12 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-08-24 23:11 [PATCH 0/9] accumulated dts updates for ls1046a Li Yang
2022-08-24 23:11 ` [PATCH 1/9] arm64: dts: ls1046a: Enable usb3-lpm-capable for usb3 node Li Yang
2022-08-24 23:11 ` [PATCH 2/9] arm64: dts: ls1046a: Add the PME interrupt to PCIe EP nodes Li Yang
2022-09-05 1:10 ` Shawn Guo
2022-08-24 23:11 ` [PATCH 3/9] arm64: dts: ls1046a: Add big-endian property for PCIe nodes Li Yang
2022-08-24 23:11 ` [PATCH 4/9] arm64: dts: ls1046a: add missing dma ranges property Li Yang
2022-08-24 23:11 ` [PATCH 5/9] arm64: dts: ls1046a: make dma-coherent global to the SoC Li Yang
2022-08-24 23:11 ` [PATCH 6/9] arm64: dts: ls1046a: use a pseudo-bus to constrain usb and sata dma size Li Yang
2022-08-24 23:11 ` [PATCH 7/9] arm64: dts: ls1046a: add gpios based i2c recovery information Li Yang
2022-09-05 1:12 ` Shawn Guo [this message]
2022-08-24 23:11 ` [PATCH 8/9] arm64: dts: ls1046a-qds: add mmio based mdio-mux support Li Yang
2022-09-05 1:17 ` Shawn Guo
2022-08-24 23:12 ` [PATCH 9/9] arm64: dts: ls1046a-qds: Modify the qspi flash frequency Li Yang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220905011227.GS1728671@dragon \
--to=shawnguo@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=leoyang.li@nxp.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh+dt@kernel.org \
--cc=ying.zhang22455@nxp.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).