Devicetree
 help / color / mirror / Atom feed
From: Andrew Halaney <ahalaney@redhat.com>
To: Rob Herring <robh@kernel.org>
Cc: krzysztof.kozlowski+dt@linaro.org, andersson@kernel.org,
	devicetree@vger.kernel.org, agross@kernel.org,
	linux-kernel@vger.kernel.org, dianders@chromium.org,
	linux-arm-msm@vger.kernel.org, johan@kernel.org,
	lgirdwood@gmail.com, konrad.dybcio@somainline.org,
	robh+dt@kernel.org, broonie@kernel.org
Subject: Re: [PATCH v2] regulator: dt-bindings: qcom,rpmh: Indicate regulator-allow-set-load dependencies
Date: Tue, 6 Sep 2022 16:50:20 -0500	[thread overview]
Message-ID: <20220906215020.igxpywsdlmzpt7fp@halaneylaptop> (raw)
In-Reply-To: <1662500460.139898.1224962.nullmailer@robh.at.kernel.org>

On Tue, Sep 06, 2022 at 04:41:00PM -0500, Rob Herring wrote:
> On Tue, 06 Sep 2022 15:19:59 -0500, Andrew Halaney wrote:
> > For RPMH regulators it doesn't make sense to indicate
> > regulator-allow-set-load without saying what modes you can switch to,
> > so be sure to indicate a dependency on regulator-allowed-modes.
> > 
> > With this in place devicetree validation can catch issues like this:
> > 
> >     /mnt/extrassd/git/linux-next/arch/arm64/boot/dts/qcom/sm8350-hdk.dtb: pm8350-rpmh-regulators: ldo5: 'regulator-allowed-modes' is a dependency of 'regulator-allow-set-load'
> >             From schema: /mnt/extrassd/git/linux-next/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.yaml
> > 
> > Suggested-by: Johan Hovold <johan@kernel.org>
> > Signed-off-by: Andrew Halaney <ahalaney@redhat.com>
> > ---
> > 
> > v1: https://lore.kernel.org/linux-arm-msm/20220902185148.635292-1-ahalaney@redhat.com/
> > Changes since v1:
> >   - Dropped first two patches in the series as they were user error
> >     (thanks Krzysztof for highlighting this!)
> >   - No change in the remaining patch
> > 
> > Krzysztof also asked if this patch in particular should apply to other
> > regulators, which I think it should for those regulator's who implement
> > set_mode(). Unfortunately I don't know of a good way to get that
> > information in order to apply it at a broader scope for devicetree
> > regulator validation. At least with this in place RPMH users can get
> > better coverage... if someone has suggestions for how to broaden the
> > scope I'm all ears!
> > 
> > Thanks,
> > Andrew
> > 
> >  .../devicetree/bindings/regulator/qcom,rpmh-regulator.yaml    | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> 
> Running 'make dtbs_check' with the schema in this patch gives the
> following warnings. Consider if they are expected or the schema is
> incorrect. These may not be new warnings.
> 
> Note that it is not yet a requirement to have 0 warnings for dtbs_check.
> This will change in the future.
> 
> Full log is available here: https://patchwork.ozlabs.org/patch/
> 
> 

<snip>

> 
> pmm8540-g-regulators: ldo8: 'regulator-allowed-modes' is a dependency of 'regulator-allow-set-load'
> 	arch/arm64/boot/dts/qcom/sa8295p-adp.dtb
> 
> pmm8540-g-regulators: qcom,pmic-id:0: 'g' is not one of ['a', 'b', 'c', 'd', 'e', 'f', 'h', 'k']
> 	arch/arm64/boot/dts/qcom/sa8295p-adp.dtb
> 
> pmm8540-g-regulators: Unevaluated properties are not allowed ('qcom,pmic-id' was unexpected)
> 	arch/arm64/boot/dts/qcom/sa8295p-adp.dtb
> 

Please note in case I didn't make it obvious in the commit message, the
regulator-allowed-modes dependency warning is the intent of this commit,
and those warnings go away once this patch series is applied:

    https://lore.kernel.org/all/20220829164952.2672848-1-dianders@chromium.org/

The last two are old warnings (that I have yet to look into).

Thanks,
Andrew


  reply	other threads:[~2022-09-06 21:50 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-09-06 20:19 [PATCH v2] regulator: dt-bindings: qcom,rpmh: Indicate regulator-allow-set-load dependencies Andrew Halaney
2022-09-06 21:41 ` Rob Herring
2022-09-06 21:50   ` Andrew Halaney [this message]
2022-09-06 21:54 ` Doug Anderson
2022-09-07  6:28 ` Johan Hovold
2022-09-07 20:54   ` Andrew Halaney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20220906215020.igxpywsdlmzpt7fp@halaneylaptop \
    --to=ahalaney@redhat.com \
    --cc=agross@kernel.org \
    --cc=andersson@kernel.org \
    --cc=broonie@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=johan@kernel.org \
    --cc=konrad.dybcio@somainline.org \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=lgirdwood@gmail.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=robh@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox