[PATCH v2 0/4] remoteproc: qcom: Add support for pronto-v3

[PATCH v2 0/4] remoteproc: qcom: Add support for pronto-v3

[Sireesh Kodali]

This patch series adds support for the pronto-v3 remoteproc found on the
MSM8953 platform. It also converts the documentation for wcnss to YAML.

Changes since v1:
* Removed redundant descriptions
* Style fixes
* Split YAML conversion into two patches, one for the actual conversion
    and one for the inclusion of the undocumented compatible string.
* Made sure all properties documented in the original are present in the
    YAML conversion

This patch series is a subset of a previous patch series [1]

[1]: https://lkml.org/lkml/2022/5/11/983

Sireesh Kodali (3):
  dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML
  dt-bindings: remoteproc: qcom: wcnss: Add qcom,pronto compatible
  dt-bindings: remoteproc: qcom: wcnss: Add compatible for pronto v3

Vladimir Lypak (1):
  remoteproc: qcom: qcom_wcnss: Add support for pronto-v3

 .../bindings/remoteproc/qcom,wcnss-pil.yaml   | 288 ++++++++++++++++++
 drivers/remoteproc/qcom_wcnss.c               |  13 +
 2 files changed, 301 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml

-- 
2.37.2

[PATCH v2 1/4] remoteproc: qcom: qcom_wcnss: Add support for pronto-v3

[Sireesh Kodali]

From: Vladimir Lypak <vladimir.lypak@gmail.com>

Pronto-v3 is similar to pronto-v2. It requires two power domains, and it
requires the xo clock. It is used on the MSM8953 platform.

Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
 drivers/remoteproc/qcom_wcnss.c | 13 +++++++++++++
 1 file changed, 13 insertions(+)

diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index 68f37296b151..ff18bfae5eb6 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -141,6 +141,18 @@ static const struct wcnss_data pronto_v2_data = {
 	.num_vregs = 1,
 };
 
+static const struct wcnss_data pronto_v3_data = {
+	.pmu_offset = 0x1004,
+	.spare_offset = 0x1088,
+
+	.pd_names = { "mx", "cx" },
+	.vregs = (struct wcnss_vreg_info[]) {
+		{ "vddpx", 1800000, 1800000, 0 },
+	},
+	.num_pd_vregs = 2,
+	.num_vregs = 1,
+};
+
 static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
@@ -675,6 +687,7 @@ static const struct of_device_id wcnss_of_match[] = {
 	{ .compatible = "qcom,riva-pil", &riva_data },
 	{ .compatible = "qcom,pronto-v1-pil", &pronto_v1_data },
 	{ .compatible = "qcom,pronto-v2-pil", &pronto_v2_data },
+	{ .compatible = "qcom,pronto-v3-pil", &pronto_v3_data },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, wcnss_of_match);
-- 
2.37.2

[PATCH v2 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML

[Sireesh Kodali]

This is a direct conversion of the existing txt documentation to YAML.
It is in preparation for the addition of pronto-v3 to the docs. This
patch doesn't document any of the existing subnodes/properties that are
not documented in the existing txt file. That is done in a separate
patch.

Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
 .../bindings/remoteproc/qcom,wcnss-pil.yaml   | 263 ++++++++++++++++++
 1 file changed, 263 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
new file mode 100644
index 000000000000..bc18139fdb91
--- /dev/null
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -0,0 +1,263 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/remoteproc/qcom,wcnss-pil.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm WCNSS Peripheral Image Loader
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@linaro.org>
+
+description:
+  This document defines the binding for a component that loads and boots
+  firmware on the Qualcomm WCNSS core.
+
+properties:
+  compatible:
+    enum:
+      - qcom,riva-pil
+      - qcom,pronto-v1-pil
+      - qcom,pronto-v2-pil
+
+  reg:
+    maxItems: 3
+    description:
+      The base address and size of the CCU, DXE and PMU register blocks
+
+  reg-names:
+    items:
+      - const: ccu
+      - const: dxe
+      - const: pmu
+
+  interrupts:
+    minItems: 2
+    maxItems: 5
+
+  interrupt-names:
+    minItems: 2
+    items:
+      - const: wdog
+      - const: fatal
+      - const: ready
+      - const: handover
+      - const: stop-ack
+
+  firmware-name:
+    $ref: /schemas/types.yaml#/definitions/string
+    description:
+      Relative firmware image path for the WCNSS core. Defaults to
+      "wcnss.mdt".
+
+  vddpx-supply:
+    description:
+      PX regulator to be held on behalf of the booting of the WCNSS core
+
+  vddmx-supply:
+    description:
+      MX regulator to be held on behalf of the booting of the WCNSS core.
+
+  vddcx-supply:
+    description:
+      CX regulator to be held on behalf of the booting of the WCNSS core.
+
+  power-domains:
+    maxItems: 2
+
+  power-domain-names:
+    items:
+      - const: cx
+      - const: mx
+
+  qcom,smem-states:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      States used by the AP to signal the WCNSS core that it should shutdown
+    items:
+      - description: Stop the modem
+
+  qcom,smem-state-names:
+    description: The names of the state bits used for SMP2P output
+    items:
+      - const: stop
+
+  memory-region:
+    maxItems: 1
+    description: reserved-memory for the WCNSS core
+
+  smd-edge:
+    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
+    description:
+      Qualcomm Shared Memory subnode which represents communication edge,
+      channels and devices related to the ADSP.
+
+  iris:
+    type: object
+    description:
+      The iris subnode of the WCNSS PIL is used to describe the attached RF module
+      and its resource dependencies.
+
+    properties:
+      compatible:
+        enum:
+          - qcom,wcn3620
+          - qcom,wcn3660
+          - qcom,wcn3660b
+          - qcom,wcn3680
+
+      clocks:
+        minItems: 1
+        items:
+          - description: XO clock
+          - description: RF clock
+
+      clock-names:
+        minItems: 1
+        items:
+          - const: xo
+          - const: rf
+
+      vddxo-supply:
+        description:
+          Reference to the regulator to be held on behalf of the booting WCNSS
+          core
+
+      vddrfa-supply:
+        description:
+          Reference to the regulator to be held on behalf of the booting WCNSS
+          core
+
+      vddpa-supply:
+        description:
+          Reference to the regulator to be held on behalf of the booting WCNSS
+          core
+
+      vdddig-supply:
+        description:
+          Reference to the regulator to be held on behalf of the booting WCNSS
+          core
+
+    required:
+      - compatible
+      - clocks
+      - clock-names
+      - vddxo-supply
+      - vddrfa-supply
+      - vddpa-supply
+      - vdddig-supply
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts-extended
+  - interrupt-names
+  - iris
+  - vddpx-supply
+  - memory-region
+  - smd-edge
+
+additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,riva-pil
+    then:
+      required:
+        - vddcx-supply
+        - vddmx-supply
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pronto-v1-pil
+              - qcom,pronto-v2-pil
+    then:
+      properties:
+        vddmx-supply:
+          deprecated: true
+          description: Deprecated for qcom,pronto-v1/2-pil
+
+        vddcx-supply:
+          deprecated: true
+          description: Deprecated for qcom,pronto-v1/2-pil
+
+      required:
+        - power-domains
+        - power-domain-names
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/qcom,rpmcc.h>
+    #include <dt-bindings/power/qcom-rpmpd.h>
+    pronto@a21b000 {
+        compatible = "qcom,pronto-v2-pil";
+        reg = <0x0a204000 0x2000>, <0x0a202000 0x1000>, <0x0a21b000 0x3000>;
+        reg-names = "ccu", "dxe", "pmu";
+
+        interrupts-extended = <&intc GIC_SPI 149 IRQ_TYPE_EDGE_RISING>,
+                              <&wcnss_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
+                              <&wcnss_smp2p_in 1 IRQ_TYPE_EDGE_RISING>,
+                              <&wcnss_smp2p_in 2 IRQ_TYPE_EDGE_RISING>,
+                              <&wcnss_smp2p_in 3 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "wdog", "fatal", "ready", "handover", "stop-ack";
+
+        power-domains = <&rpmpd MSM8916_VDDCX>, <&rpmpd MSM8916_VDDMX>;
+        power-domain-names = "cx", "mx";
+
+        vddpx-supply = <&pm8916_l7>;
+
+        qcom,smem-states = <&wcnss_smp2p_out 0>;
+        qcom,smem-state-names = "stop";
+
+        memory-region = <&wcnss_region>;
+
+        pinctrl-names = "default";
+        pinctrl-0 = <&wcnss_pin_a>;
+
+        iris {
+            compatible = "qcom,wcn3620";
+
+            clocks = <&rpmcc RPM_SMD_RF_CLK2>;
+            clock-names = "xo";
+        };
+
+        smd-edge {
+            interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>;
+
+            qcom,ipc = <&apcs 8 17>;
+            qcom,smd-edge = <6>;
+            qcom,remote-pid = <4>;
+
+            label = "pronto";
+
+            wcnss {
+                compatible = "qcom,wcnss";
+                qcom,smd-channels = "WCNSS_CTRL";
+
+                qcom,mmio = <&pronto>;
+
+                bt {
+                    compatible = "qcom,wcnss-bt";
+                };
+
+                wifi {
+                    compatible = "qcom,wcnss-wlan";
+
+                    interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "tx", "rx";
+
+                    qcom,smem-states = <&apps_smsm 10>, <&apps_smsm 9>;
+                    qcom,smem-state-names = "tx-enable", "tx-rings-empty";
+                };
+            };
+        };
+    };
-- 
2.37.2

Re: [PATCH v2 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML

[Rob Herring]

On Fri, 09 Sep 2022 00:19:23 +0530, Sireesh Kodali wrote:
> This is a direct conversion of the existing txt documentation to YAML.
> It is in preparation for the addition of pronto-v3 to the docs. This
> patch doesn't document any of the existing subnodes/properties that are
> not documented in the existing txt file. That is done in a separate
> patch.
> 
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> ---
>  .../bindings/remoteproc/qcom,wcnss-pil.yaml   | 263 ++++++++++++++++++
>  1 file changed, 263 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vddxo-supply' is a required property
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vddrfa-supply' is a required property
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vddpa-supply' is a required property
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vdddig-supply' is a required property
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: wcnss: 'bt' does not match any of the regexes: 'pinctrl-[0-9]+'
	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.

Re: [PATCH v2 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML

[Krzysztof Kozlowski]

On 08/09/2022 23:16, Rob Herring wrote:
> On Fri, 09 Sep 2022 00:19:23 +0530, Sireesh Kodali wrote:
>> This is a direct conversion of the existing txt documentation to YAML.
>> It is in preparation for the addition of pronto-v3 to the docs. This
>> patch doesn't document any of the existing subnodes/properties that are
>> not documented in the existing txt file. That is done in a separate
>> patch.
>>
>> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
>> ---
>>  .../bindings/remoteproc/qcom,wcnss-pil.yaml   | 263 ++++++++++++++++++
>>  1 file changed, 263 insertions(+)
>>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
>>
> 
> My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> on your patch (DT_CHECKER_FLAGS is new in v5.13):
> 
> yamllint warnings/errors:
> 
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vddxo-supply' is a required property
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vddrfa-supply' is a required property
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vddpa-supply' is a required property
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vdddig-supply' is a required property
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: wcnss: 'bt' does not match any of the regexes: 'pinctrl-[0-9]+'
> 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
> 

This needs to be fixed.

Please run `make dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).


Best regards,
Krzysztof

Re: [PATCH v2 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML

[Sireesh Kodali]

On Fri Sep 9, 2022 at 1:30 PM IST, Krzysztof Kozlowski wrote:
> On 08/09/2022 23:16, Rob Herring wrote:
> > On Fri, 09 Sep 2022 00:19:23 +0530, Sireesh Kodali wrote:
> >> This is a direct conversion of the existing txt documentation to YAML.
> >> It is in preparation for the addition of pronto-v3 to the docs. This
> >> patch doesn't document any of the existing subnodes/properties that are
> >> not documented in the existing txt file. That is done in a separate
> >> patch.
> >>
> >> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> >> ---
> >>  .../bindings/remoteproc/qcom,wcnss-pil.yaml   | 263 ++++++++++++++++++
> >>  1 file changed, 263 insertions(+)
> >>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> >>
> > 
> > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
> > on your patch (DT_CHECKER_FLAGS is new in v5.13):
> > 
> > yamllint warnings/errors:
> > 
> > dtschema/dtc warnings/errors:
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vddxo-supply' is a required property
> > 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vddrfa-supply' is a required property
> > 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vddpa-supply' is a required property
> > 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: pronto@a21b000: iris: 'vdddig-supply' is a required property
> > 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.example.dtb: wcnss: 'bt' does not match any of the regexes: 'pinctrl-[0-9]+'
> > 	From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/qcom/qcom,wcnss.yaml
> > 
>
> This needs to be fixed.
>
> Please run `make dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
>
Will be fixed in v3

Regards,
Sireesh
>
> Best regards,
> Krzysztof

Re: [PATCH v2 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML

[Krzysztof Kozlowski]

On 08/09/2022 20:49, Sireesh Kodali wrote:
> This is a direct conversion of the existing txt documentation to YAML.
> It is in preparation for the addition of pronto-v3 to the docs. This
> patch doesn't document any of the existing subnodes/properties that are
> not documented in the existing txt file. That is done in a separate
> patch.

There is no conversion here... Just adding new bindings.

Best regards,
Krzysztof

Re: [PATCH v2 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML

[Sireesh Kodali]

On Fri Sep 9, 2022 at 1:27 PM IST, Krzysztof Kozlowski wrote:
> On 08/09/2022 20:49, Sireesh Kodali wrote:
> > This is a direct conversion of the existing txt documentation to YAML.
> > It is in preparation for the addition of pronto-v3 to the docs. This
> > patch doesn't document any of the existing subnodes/properties that are
> > not documented in the existing txt file. That is done in a separate
> > patch.
>
> There is no conversion here... Just adding new bindings.

My mistake, will be fixed in v3

Thanks,
Sireesh
>
> Best regards,
> Krzysztof

Re: [PATCH v2 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML

[Krzysztof Kozlowski]

On 08/09/2022 20:49, Sireesh Kodali wrote:
> This is a direct conversion of the existing txt documentation to YAML.
> It is in preparation for the addition of pronto-v3 to the docs. This
> patch doesn't document any of the existing subnodes/properties that are
> not documented in the existing txt file. That is done in a separate
> patch.
> 
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> ---
>  .../bindings/remoteproc/qcom,wcnss-pil.yaml   | 263 ++++++++++++++++++
>  1 file changed, 263 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> new file mode 100644
> index 000000000000..bc18139fdb91
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> @@ -0,0 +1,263 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/remoteproc/qcom,wcnss-pil.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm WCNSS Peripheral Image Loader
> +
> +maintainers:
> +  - Bjorn Andersson <bjorn.andersson@linaro.org>

Use email from maintainers entry.

> +
> +description:
> +  This document defines the binding for a component that loads and boots
> +  firmware on the Qualcomm WCNSS core.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - qcom,riva-pil
> +      - qcom,pronto-v1-pil
> +      - qcom,pronto-v2-pil
> +
> +  reg:
> +    maxItems: 3
> +    description:
> +      The base address and size of the CCU, DXE and PMU register blocks
> +
> +  reg-names:
> +    items:
> +      - const: ccu
> +      - const: dxe
> +      - const: pmu
> +
> +  interrupts:
> +    minItems: 2
> +    maxItems: 5
> +
> +  interrupt-names:
> +    minItems: 2
> +    items:
> +      - const: wdog
> +      - const: fatal
> +      - const: ready
> +      - const: handover
> +      - const: stop-ack
> +
> +  firmware-name:
> +    $ref: /schemas/types.yaml#/definitions/string
> +    description:
> +      Relative firmware image path for the WCNSS core. Defaults to
> +      "wcnss.mdt".
> +
> +  vddpx-supply:
> +    description:
> +      PX regulator to be held on behalf of the booting of the WCNSS core
> +
> +  vddmx-supply:
> +    description:
> +      MX regulator to be held on behalf of the booting of the WCNSS core.
> +
> +  vddcx-supply:
> +    description:
> +      CX regulator to be held on behalf of the booting of the WCNSS core.
> +
> +  power-domains:
> +    maxItems: 2
> +
> +  power-domain-names:
> +    items:
> +      - const: cx
> +      - const: mx
> +
> +  qcom,smem-states:
> +    $ref: /schemas/types.yaml#/definitions/phandle-array
> +    description:
> +      States used by the AP to signal the WCNSS core that it should shutdown
> +    items:
> +      - description: Stop the modem
> +
> +  qcom,smem-state-names:
> +    description: The names of the state bits used for SMP2P output
> +    items:
> +      - const: stop
> +
> +  memory-region:
> +    maxItems: 1
> +    description: reserved-memory for the WCNSS core
> +
> +  smd-edge:
> +    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
> +    description:
> +      Qualcomm Shared Memory subnode which represents communication edge,
> +      channels and devices related to the ADSP.
> +
> +  iris:
> +    type: object
> +    description:
> +      The iris subnode of the WCNSS PIL is used to describe the attached RF module
> +      and its resource dependencies.
> +
additionalProperties false on this level.

> +    properties:
> +      compatible:
> +        enum:
> +          - qcom,wcn3620
> +          - qcom,wcn3660
> +          - qcom,wcn3660b
> +          - qcom,wcn3680
> +
> +      clocks:
> +        minItems: 1
> +        items:
> +          - description: XO clock
> +          - description: RF clock
> +
> +      clock-names:
> +        minItems: 1
> +        items:
> +          - const: xo
> +          - const: rf
> +
> +      vddxo-supply:
> +        description:
> +          Reference to the regulator to be held on behalf of the booting WCNSS
> +          core
> +
> +      vddrfa-supply:
> +        description:
> +          Reference to the regulator to be held on behalf of the booting WCNSS
> +          core
> +
> +      vddpa-supply:
> +        description:
> +          Reference to the regulator to be held on behalf of the booting WCNSS
> +          core
> +
> +      vdddig-supply:

Best regards,
Krzysztof

Re: [PATCH v2 2/4] dt-bindings: remoteproc: qcom: Convert wcnss documentation to YAML

[Sireesh Kodali]

On Fri Sep 9, 2022 at 1:29 PM IST, Krzysztof Kozlowski wrote:
> On 08/09/2022 20:49, Sireesh Kodali wrote:
> > This is a direct conversion of the existing txt documentation to YAML.
> > It is in preparation for the addition of pronto-v3 to the docs. This
> > patch doesn't document any of the existing subnodes/properties that are
> > not documented in the existing txt file. That is done in a separate
> > patch.
> > 
> > Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> > ---
> >  .../bindings/remoteproc/qcom,wcnss-pil.yaml   | 263 ++++++++++++++++++
> >  1 file changed, 263 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > new file mode 100644
> > index 000000000000..bc18139fdb91
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > @@ -0,0 +1,263 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/remoteproc/qcom,wcnss-pil.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Qualcomm WCNSS Peripheral Image Loader
> > +
> > +maintainers:
> > +  - Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Use email from maintainers entry.

I didn't notice the entry had changed from since v1, will be fixed in v3
>
> > +
> > +description:
> > +  This document defines the binding for a component that loads and boots
> > +  firmware on the Qualcomm WCNSS core.
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - qcom,riva-pil
> > +      - qcom,pronto-v1-pil
> > +      - qcom,pronto-v2-pil
> > +
> > +  reg:
> > +    maxItems: 3
> > +    description:
> > +      The base address and size of the CCU, DXE and PMU register blocks
> > +
> > +  reg-names:
> > +    items:
> > +      - const: ccu
> > +      - const: dxe
> > +      - const: pmu
> > +
> > +  interrupts:
> > +    minItems: 2
> > +    maxItems: 5
> > +
> > +  interrupt-names:
> > +    minItems: 2
> > +    items:
> > +      - const: wdog
> > +      - const: fatal
> > +      - const: ready
> > +      - const: handover
> > +      - const: stop-ack
> > +
> > +  firmware-name:
> > +    $ref: /schemas/types.yaml#/definitions/string
> > +    description:
> > +      Relative firmware image path for the WCNSS core. Defaults to
> > +      "wcnss.mdt".
> > +
> > +  vddpx-supply:
> > +    description:
> > +      PX regulator to be held on behalf of the booting of the WCNSS core
> > +
> > +  vddmx-supply:
> > +    description:
> > +      MX regulator to be held on behalf of the booting of the WCNSS core.
> > +
> > +  vddcx-supply:
> > +    description:
> > +      CX regulator to be held on behalf of the booting of the WCNSS core.
> > +
> > +  power-domains:
> > +    maxItems: 2
> > +
> > +  power-domain-names:
> > +    items:
> > +      - const: cx
> > +      - const: mx
> > +
> > +  qcom,smem-states:
> > +    $ref: /schemas/types.yaml#/definitions/phandle-array
> > +    description:
> > +      States used by the AP to signal the WCNSS core that it should shutdown
> > +    items:
> > +      - description: Stop the modem
> > +
> > +  qcom,smem-state-names:
> > +    description: The names of the state bits used for SMP2P output
> > +    items:
> > +      - const: stop
> > +
> > +  memory-region:
> > +    maxItems: 1
> > +    description: reserved-memory for the WCNSS core
> > +
> > +  smd-edge:
> > +    $ref: /schemas/remoteproc/qcom,smd-edge.yaml#
> > +    description:
> > +      Qualcomm Shared Memory subnode which represents communication edge,
> > +      channels and devices related to the ADSP.
> > +
> > +  iris:
> > +    type: object
> > +    description:
> > +      The iris subnode of the WCNSS PIL is used to describe the attached RF module
> > +      and its resource dependencies.
> > +
> additionalProperties false on this level.

Will be added in v3

Regards,
Sireesh
>
> > +    properties:
> > +      compatible:
> > +        enum:
> > +          - qcom,wcn3620
> > +          - qcom,wcn3660
> > +          - qcom,wcn3660b
> > +          - qcom,wcn3680
> > +
> > +      clocks:
> > +        minItems: 1
> > +        items:
> > +          - description: XO clock
> > +          - description: RF clock
> > +
> > +      clock-names:
> > +        minItems: 1
> > +        items:
> > +          - const: xo
> > +          - const: rf
> > +
> > +      vddxo-supply:
> > +        description:
> > +          Reference to the regulator to be held on behalf of the booting WCNSS
> > +          core
> > +
> > +      vddrfa-supply:
> > +        description:
> > +          Reference to the regulator to be held on behalf of the booting WCNSS
> > +          core
> > +
> > +      vddpa-supply:
> > +        description:
> > +          Reference to the regulator to be held on behalf of the booting WCNSS
> > +          core
> > +
> > +      vdddig-supply:
>
> Best regards,
> Krzysztof

[PATCH v2 3/4] dt-bindings: remoteproc: qcom: wcnss: Add qcom,pronto compatible

[Sireesh Kodali]

The qcom,pronto compatible is used in the wcn36xx driver to determine
which register to access. However, this compatible was not documented.
This patch documents the existing compatible as is, since it isn't
immediately clear why the wcn36xx driver uses this extra compatible,
rather than relying directly on the regular compatible string.

Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
 .../bindings/remoteproc/qcom,wcnss-pil.yaml      | 16 ++++++++++++----
 1 file changed, 12 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
index bc18139fdb91..5e4a97e9d330 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -15,10 +15,18 @@ description:
 
 properties:
   compatible:
-    enum:
-      - qcom,riva-pil
-      - qcom,pronto-v1-pil
-      - qcom,pronto-v2-pil
+    description:
+      Append "qcom,pronto" if the device is actually pronto, and not riva
+    oneOf:
+      - items:
+          - enum:
+              - qcom,pronto-v1-pil
+              - qcom,pronto-v2-pil
+          - enum:
+              - qcom,pronto
+      - items:
+          - enum:
+              - qcom,riva-pil
 
   reg:
     maxItems: 3
-- 
2.37.2

Re: [PATCH v2 3/4] dt-bindings: remoteproc: qcom: wcnss: Add qcom,pronto compatible

[Krzysztof Kozlowski]

On 08/09/2022 20:49, Sireesh Kodali wrote:
> The qcom,pronto compatible is used in the wcn36xx driver to determine
> which register to access. However, this compatible was not documented.
> This patch documents the existing compatible as is, since it isn't
> immediately clear why the wcn36xx driver uses this extra compatible,
> rather than relying directly on the regular compatible string.

The patch does much more - messes entirely all compatibles...

> 
> Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> ---
>  .../bindings/remoteproc/qcom,wcnss-pil.yaml      | 16 ++++++++++++----
>  1 file changed, 12 insertions(+), 4 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> index bc18139fdb91..5e4a97e9d330 100644
> --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> @@ -15,10 +15,18 @@ description:
>  
>  properties:
>    compatible:
> -    enum:
> -      - qcom,riva-pil
> -      - qcom,pronto-v1-pil
> -      - qcom,pronto-v2-pil
> +    description:
> +      Append "qcom,pronto" if the device is actually pronto, and not riva
> +    oneOf:
> +      - items:
> +          - enum:
> +              - qcom,pronto-v1-pil
> +              - qcom,pronto-v2-pil
> +          - enum:
> +              - qcom,pronto

It's const, not enum.

> +      - items:

No items.

> +          - enum:
> +              - qcom,riva-pil


Best regards,
Krzysztof

Re: [PATCH v2 3/4] dt-bindings: remoteproc: qcom: wcnss: Add qcom,pronto compatible

[Sireesh Kodali]

On Fri Sep 9, 2022 at 1:30 PM IST, Krzysztof Kozlowski wrote:
> On 08/09/2022 20:49, Sireesh Kodali wrote:
> > The qcom,pronto compatible is used in the wcn36xx driver to determine
> > which register to access. However, this compatible was not documented.
> > This patch documents the existing compatible as is, since it isn't
> > immediately clear why the wcn36xx driver uses this extra compatible,
> > rather than relying directly on the regular compatible string.
>
> The patch does much more - messes entirely all compatibles...

Is there another preferred way to handle this?
>
> > 
> > Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
> > ---
> >  .../bindings/remoteproc/qcom,wcnss-pil.yaml      | 16 ++++++++++++----
> >  1 file changed, 12 insertions(+), 4 deletions(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > index bc18139fdb91..5e4a97e9d330 100644
> > --- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > +++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
> > @@ -15,10 +15,18 @@ description:
> >  
> >  properties:
> >    compatible:
> > -    enum:
> > -      - qcom,riva-pil
> > -      - qcom,pronto-v1-pil
> > -      - qcom,pronto-v2-pil
> > +    description:
> > +      Append "qcom,pronto" if the device is actually pronto, and not riva
> > +    oneOf:
> > +      - items:
> > +          - enum:
> > +              - qcom,pronto-v1-pil
> > +              - qcom,pronto-v2-pil
> > +          - enum:
> > +              - qcom,pronto
>
> It's const, not enum.
>
> > +      - items:
>
> No items.

Both these things will be fixed in v3
>
> > +          - enum:
> > +              - qcom,riva-pil
>
>
> Best regards,
> Krzysztof

Re: [PATCH v2 3/4] dt-bindings: remoteproc: qcom: wcnss: Add qcom,pronto compatible

[Krzysztof Kozlowski]

On 12/09/2022 05:33, Sireesh Kodali wrote:
> On Fri Sep 9, 2022 at 1:30 PM IST, Krzysztof Kozlowski wrote:
>> On 08/09/2022 20:49, Sireesh Kodali wrote:
>>> The qcom,pronto compatible is used in the wcn36xx driver to determine
>>> which register to access. However, this compatible was not documented.
>>> This patch documents the existing compatible as is, since it isn't
>>> immediately clear why the wcn36xx driver uses this extra compatible,
>>> rather than relying directly on the regular compatible string.
>>
>> The patch does much more - messes entirely all compatibles...
> 
> Is there another preferred way to handle this?

The one which does not introduces any other changes than what you wrote
here. You wrote here, that qcom,pronto is being added, so why some
things are changed to oneOf or to enums?

Best regards,
Krzysztof

Re: [PATCH v2 3/4] dt-bindings: remoteproc: qcom: wcnss: Add qcom,pronto compatible

[Sireesh Kodali]

On Mon Sep 12, 2022 at 4:17 PM IST, Krzysztof Kozlowski wrote:
> On 12/09/2022 05:33, Sireesh Kodali wrote:
> > On Fri Sep 9, 2022 at 1:30 PM IST, Krzysztof Kozlowski wrote:
> >> On 08/09/2022 20:49, Sireesh Kodali wrote:
> >>> The qcom,pronto compatible is used in the wcn36xx driver to determine
> >>> which register to access. However, this compatible was not documented.
> >>> This patch documents the existing compatible as is, since it isn't
> >>> immediately clear why the wcn36xx driver uses this extra compatible,
> >>> rather than relying directly on the regular compatible string.
> >>
> >> The patch does much more - messes entirely all compatibles...
> > 
> > Is there another preferred way to handle this?
>
> The one which does not introduces any other changes than what you wrote
> here. You wrote here, that qcom,pronto is being added, so why some
> things are changed to oneOf or to enums?

I think I didn't explain what the patch is doing properly..

Right now, the remoteproc driver expects "qcom,pronto-v2/v3" for pronto
devices, and "qcom,riva" for riva. This has been already documented
properly.

The wcn36xx driver expects "qcom,pronto" for pronto devices. I am not sure
why wcn36xx was written like this. But it is the current state of the
driver that I am documenting. So the device tree will have compatible
strings like "qcom,pronto-v2", "qcom,pronto"; Both need to be present.
For Riva it would just be compatible = "qcom,riva"; Hence the oneOf.
I will add a comment explaining this in v3
>
> Best regards,
> Krzysztof

[PATCH v2 4/4] dt-bindings: remoteproc: qcom: wcnss: Add compatible for pronto v3

[Sireesh Kodali]

The pronto v3 remoteproc is similar to pronto v2. It is found on the
MSM8953 platform, which is used by SDM450, SDM625, SDM626, APQ8053 and
other SoCs. Since the configuration is same on all SoCs, a single
compatible is used.

Signed-off-by: Sireesh Kodali <sireeshkodali1@gmail.com>
---
 .../bindings/remoteproc/qcom,wcnss-pil.yaml     | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
index 5e4a97e9d330..becd9c611798 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,wcnss-pil.yaml
@@ -22,6 +22,7 @@ properties:
           - enum:
               - qcom,pronto-v1-pil
               - qcom,pronto-v2-pil
+              - qcom,pronto-v3-pil
           - enum:
               - qcom,pronto
       - items:
@@ -200,6 +201,22 @@ allOf:
         - power-domains
         - power-domain-names
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,pronto-v3-pil
+    then:
+      properties:
+        vddpx-supply: false
+        vddmx-supply: false
+        vddcx-supply: false
+
+      required:
+        - power-domains
+        - power-domain-names
+
 examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
-- 
2.37.2