[RFC PATCH 06/10] thermal/drivers/tsens: use generic calibration routine for msm8976

[Dmitry Baryshkov <dmitry.baryshkov@linaro.org>]

According to msm-3.10, msm8976 uses the same routine for processing
calibration data as other platforms. Drop the msm8976-specific
compute_intercept_slope_8976() and use compute_intercept_slope().

Cc: Konrad Dybcio <konrad.dybcio@somainline.org>
Cc: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 drivers/thermal/qcom/tsens-v1.c | 26 +-------------------------
 1 file changed, 1 insertion(+), 25 deletions(-)

diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c
index e6ef3bacfc39..11363a318ae8 100644
--- a/drivers/thermal/qcom/tsens-v1.c
+++ b/drivers/thermal/qcom/tsens-v1.c
@@ -137,30 +137,6 @@
 #define CAL_SEL_MASK	7
 #define CAL_SEL_SHIFT	0
 
-static void compute_intercept_slope_8976(struct tsens_priv *priv,
-			      u32 *p1, u32 *p2, u32 mode)
-{
-	int i;
-
-	priv->sensor[0].slope = 3313;
-	priv->sensor[1].slope = 3275;
-	priv->sensor[2].slope = 3320;
-	priv->sensor[3].slope = 3246;
-	priv->sensor[4].slope = 3279;
-	priv->sensor[5].slope = 3257;
-	priv->sensor[6].slope = 3234;
-	priv->sensor[7].slope = 3269;
-	priv->sensor[8].slope = 3255;
-	priv->sensor[9].slope = 3239;
-	priv->sensor[10].slope = 3286;
-
-	for (i = 0; i < priv->num_sensors; i++) {
-		priv->sensor[i].offset = (p1[i] * SLOPE_FACTOR) -
-				(CAL_DEGC_PT1 *
-				priv->sensor[i].slope);
-	}
-}
-
 static int calibrate_v1(struct tsens_priv *priv)
 {
 	u32 base0 = 0, base1 = 0;
@@ -290,7 +266,7 @@ static int calibrate_8976(struct tsens_priv *priv)
 		break;
 	}
 
-	compute_intercept_slope_8976(priv, p1, p2, mode);
+	compute_intercept_slope(priv, p1, p2, mode);
 	kfree(qfprom_cdata);
 
 	return 0;
-- 
2.35.1