[PATCH v1 1/2] Revert "dt-bindings: Add byteswap order to chrontel ch7033"

[Robert Foss <robert.foss@linaro.org>]

As reported by Laurent in response to this commit[1], this functionality should
not be implemented using the devicetree, because of this let's revert this series
for now.

This reverts commit a4be71430c76eca43679e8485085c230afa84460.

[1] https://lore.kernel.org/all/20220902153906.31000-2-macroalpha82@gmail.com/

Signed-off-by: Robert Foss <robert.foss@linaro.org>
---
 .../bindings/display/bridge/chrontel,ch7033.yaml    | 13 -------------
 1 file changed, 13 deletions(-)

diff --git a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
index 984b90893583..bb6289c7d375 100644
--- a/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
+++ b/Documentation/devicetree/bindings/display/bridge/chrontel,ch7033.yaml
@@ -14,19 +14,6 @@ properties:
   compatible:
     const: chrontel,ch7033
 
-  chrontel,byteswap:
-    $ref: /schemas/types.yaml#/definitions/uint8
-    enum:
-      - 0  # BYTE_SWAP_RGB
-      - 1  # BYTE_SWAP_RBG
-      - 2  # BYTE_SWAP_GRB
-      - 3  # BYTE_SWAP_GBR
-      - 4  # BYTE_SWAP_BRG
-      - 5  # BYTE_SWAP_BGR
-    description: |
-      Set the byteswap value of the bridge. This is optional and if not
-      set value of BYTE_SWAP_BGR is used.
-
   reg:
     maxItems: 1
     description: I2C address of the device
-- 
2.34.1