[PATCH v5 7/7] riscv: Add cache information in AUX vector

[Zong Li <zong.li@sifive.com>]

From: Greentime Hu <greentime.hu@sifive.com>

There are no standard CSR registers to provide cache information, the
way for RISC-V is to get this information from DT. sysconf syscall
could use them to get information of cache through AUX vector.

The result of 'getconf -a|grep -i cache' as follows:
LEVEL1_ICACHE_SIZE                 32768
LEVEL1_ICACHE_ASSOC                2
LEVEL1_ICACHE_LINESIZE             64
LEVEL1_DCACHE_SIZE                 32768
LEVEL1_DCACHE_ASSOC                4
LEVEL1_DCACHE_LINESIZE             64
LEVEL2_CACHE_SIZE                  524288
LEVEL2_CACHE_ASSOC                 8
LEVEL2_CACHE_LINESIZE              64
LEVEL3_CACHE_SIZE                  4194304
LEVEL3_CACHE_ASSOC                 16
LEVEL3_CACHE_LINESIZE              64
LEVEL4_CACHE_SIZE                  0
LEVEL4_CACHE_ASSOC                 0
LEVEL4_CACHE_LINESIZE              0

Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Zong Li <zong.li@sifive.com>
Suggested-by: Zong Li <zong.li@sifive.com>
---
 arch/riscv/include/asm/elf.h         | 4 ++++
 arch/riscv/include/uapi/asm/auxvec.h | 4 +++-
 2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/arch/riscv/include/asm/elf.h b/arch/riscv/include/asm/elf.h
index 14fc7342490b..e7acffdf21d2 100644
--- a/arch/riscv/include/asm/elf.h
+++ b/arch/riscv/include/asm/elf.h
@@ -99,6 +99,10 @@ do {								\
 		get_cache_size(2, CACHE_TYPE_UNIFIED));		\
 	NEW_AUX_ENT(AT_L2_CACHEGEOMETRY,			\
 		get_cache_geometry(2, CACHE_TYPE_UNIFIED));	\
+	NEW_AUX_ENT(AT_L3_CACHESIZE,				\
+		get_cache_size(3, CACHE_TYPE_UNIFIED));		\
+	NEW_AUX_ENT(AT_L3_CACHEGEOMETRY,			\
+		get_cache_geometry(3, CACHE_TYPE_UNIFIED));	\
 } while (0)
 #define ARCH_HAS_SETUP_ADDITIONAL_PAGES
 struct linux_binprm;
diff --git a/arch/riscv/include/uapi/asm/auxvec.h b/arch/riscv/include/uapi/asm/auxvec.h
index 32c73ba1d531..fb187a33ce58 100644
--- a/arch/riscv/include/uapi/asm/auxvec.h
+++ b/arch/riscv/include/uapi/asm/auxvec.h
@@ -30,8 +30,10 @@
 #define AT_L1D_CACHEGEOMETRY	43
 #define AT_L2_CACHESIZE		44
 #define AT_L2_CACHEGEOMETRY	45
+#define AT_L3_CACHESIZE		46
+#define AT_L3_CACHEGEOMETRY	47
 
 /* entries in ARCH_DLINFO */
-#define AT_VECTOR_SIZE_ARCH	7
+#define AT_VECTOR_SIZE_ARCH	9
 
 #endif /* _UAPI_ASM_RISCV_AUXVEC_H */
-- 
2.17.1