From: Tony Lindgren <tony@atomide.com>
To: Nishanth Menon <nm@ti.com>, Vignesh Raghavendra <vigneshr@ti.com>
Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
Keerthy <j-keerthy@ti.com>
Subject: [PATCH 2/2] arm64: dts: ti: k3-am625-sk: Use pwm-led instead of gpio-led
Date: Wed, 14 Sep 2022 10:42:24 +0300 [thread overview]
Message-ID: <20220914074224.44786-2-tony@atomide.com> (raw)
In-Reply-To: <20220914074224.44786-1-tony@atomide.com>
On am625, pad c17 can be used either in gpio mode or pwm mode to control
the connected led. Let's change to use pwm-led for additional brighness
control.
The pwm controller is dmtimer7 for pad C17. We configure it for 128 Hz
rate (1000000000 / 7812500) similar to what has been done elsewhere for
pwm-leds.
Cc: Keerthy <j-keerthy@ti.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
arch/arm64/boot/dts/ti/k3-am625-sk.dts | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -131,18 +131,25 @@ vdd_sd_dv: regulator-4 {
};
leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&usr_led_pins_default>;
+ compatible = "pwm-leds";
led-0 {
label = "am62-sk:green:heartbeat";
- gpios = <&main_gpio1 49 GPIO_ACTIVE_HIGH>;
+ pwms = <&main_pwm7 0 7812500 0>;
+ max-brightness = <255>;
linux,default-trigger = "heartbeat";
function = LED_FUNCTION_HEARTBEAT;
default-state = "off";
};
};
+
+ main_pwm7: dmtimer-main-pwm-7 {
+ pinctrl-0 = <&usr_led_pins_default>;
+ pinctrl-names = "default";
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&main_timer7>;
+ };
};
&main_pmx0 {
@@ -203,7 +210,7 @@ AM62X_IOPAD(0x240, PIN_INPUT, 0) /* (D17) MMC1_SDCD */
usr_led_pins_default: usr-led-pins-default {
pinctrl-single,pins = <
- AM62X_IOPAD(0x244, PIN_OUTPUT, 7) /* (C17) MMC1_SDWP.GPIO1_49 */
+ AM62X_IOPAD(0x244, PIN_OUTPUT, 2) /* (C17) MMC1_SDWP.TIMER_IO7 */
>;
};
--
2.37.1
next prev parent reply other threads:[~2022-09-14 7:42 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-09-14 7:42 [PATCH 1/2] arm64: dts: ti: k3-am62: Add general purpose timers for am62 Tony Lindgren
2022-09-14 7:42 ` Tony Lindgren [this message]
2022-10-28 20:19 ` [PATCH 2/2] arm64: dts: ti: k3-am625-sk: Use pwm-led instead of gpio-led Georgi Vlaev
2022-09-17 7:02 ` [PATCH 1/2] arm64: dts: ti: k3-am62: Add general purpose timers for am62 Vignesh Raghavendra
2022-09-19 11:28 ` Tony Lindgren
2022-10-28 20:12 ` Georgi Vlaev
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20220914074224.44786-2-tony@atomide.com \
--to=tony@atomide.com \
--cc=devicetree@vger.kernel.org \
--cc=j-keerthy@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=nm@ti.com \
--cc=vigneshr@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).